Epcom TT-676 Bedienungsanleitung
Epcom
AV extender
TT-676
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epcom TT-676 (3 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
· Important Safety Notice
· Introduction
· Features
· Installation Requirements
· Interfaces
· Installation Procedures
1. Do not mix up HDMI to R J45 transmitter and R J45 to HDMI receiver
before installation.
2. Do not hot plug when it is working.
3. Use DC5V/2A power supply only. Make sure specification matched
if using 3rd party adapters.
4. Static electricity will cause damage of the device, please do ESD
protection when using the device.
1. Zero latency lossless compression.,
2. 4K@60Hz HDMI signal can be transmitted 40-70 meters through a
CAT5E/6/6A/7 network cable.
3. Supports up to 10 receivers in cascade, auto adapt to display resolution .
4. The receiver supports S/PDIF output.
5. Supports Dolby audio(Dolby Digital Plus/Dolby TrueHD/Dolby Digital/Dolby atmos)
6. Supports HDR(YUV4:4:4), maximum transmission rate 18Gbps.
7. Transmitter support one HDMI loop-out
8. Support bi-directional IR passback function (20～60KHz), cascade when
10 receiver available
9. One receiver can be powered by the transmitter via network cable, Only
on the first receiver.
10. Anti - lightning, anti - surge, anti - static protection.
11 Metal casing, stable and durable. .
Transmitter unit x1pc Receiver unit x1pc
HDMI OUTPUT
1. HDMI source device (compute graphics card, DVD, PS3, )HD
monitoring equipment etc.
2. HDMI display device like SDT V, HDTV, projector with HDMI por t.
3. UTP/STP CAT5E/CAT6/CAT6A/CAT7 cable. Follow standard IEEE-568B,
It is recommended to select a network cable with less loss and crosstalk.
2. Receiver (RX)
1. Connection
IR blaster extension
cable x1pcs
IR receiver extension
cable x1pcs
DC5V/2A x1pc
DC5V input
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal,
the indicator will light solid blue
This HDMI Extender includes a transmitter unit and a receiver unit,
allows HDMI signal to be transmitted up to 40 meters at 4K resolution
using a CAT5E network cable, and up to 70 meters at 4K resolution
using a CAT6/6A/7 network cable. It supports bi-directional IR passback
with a wide IR frequency 20-60KHz. The receiver can be powered by the
transmitter (Connect the power supply to the transmitter only), please
note that this HDMI Extender can not use with switch or router. It is perfect
for outdoor advertising, video clips, monitor system, home entertainment,
and conference, etc.
· Package Contents
1. Transmitter (TX)
User manual x1pc
Connect with HDMI display device
Connect with DC5V/2A power adapter
HDMI INPUT
IR IN
Connect with IR receiver extension cable, please
make sure the remote control used is within the
effective range
Connect with IR blaster extension cable, please
get closer to the source device while using
IR OUT
③
④
⑤
⑦
⑥
⑧
DC5V input
Connect with network cable
When there is power and no HDMI signal, the
indicator will flash, when there is HDMI signal,
the indicator will light solid blue
Connect with DC5V/2A power adapter
IR IN
Connect with IR receiver extension cable, please
make sure the remote control used is within the
effective range
Connect with IR blaster extension cable, please
get closer to the source device while using
IR OUT
①
②
③
④
⑤
⑦
⑥
⑧
Press to restart the device
HDMI OUTPUT Connect with HDMI display device
⑩
S/PDIF OUT Output digital audio signal.
Connect with network cable
①
②RJ45 signal output
Reset button Press to restart the device
HDMI IN
Note: Only the TX needs to be powered when one to one connection.
one to one:
IR OUT
IR IN IR OUT
IR IN
HDMI OUT
HDMI Display
Network cable
HDMI Display
IR OUT
IR IN
IR OUT
IR IN
HDMI DisplayHDMI Display
one to many：
IR OUT
IR IN IR OUT
IR IN
...10pcs
Network cable
Network cable
HDMI IN HDMI OUT
HDMI OUTHDMI OUT
HDMI Display
HDMI Display
Power/Signal
indicator
RJ45 signal input
Reset button
Power/Signal
indicator
RJ45 signal output Connect with network cable
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
TM
TM
TM
TM
TM
TM
TM
TM
⑨
Audio switch Choose to decode audio from HDMI or ARC
output from fiber optic interface
· Specification
106.0(L) x 99.0(W) x 2 6.2(H)mm
TX 210g RX:210g :
DC5V/2A
TX＜4W RX＜4W
HDMI Extender
1 ) IR blaster extension cable should plug in the IR OUT port of the
transmitter and receiver, IR receiver extension cable should plug in
the IR IN port of the transmitter and receiver.
2 ) The emitter of the IR blaster extension cable should be as close as
possible to the IR receiving window of the source device.
3 ) Face the receiving head of the IR receiver extension cable to the user
for convenient remote control.
· FAQ
Q: There is no output on screen when all connections are correct?
A: 1) Please make sure the HDMI cables supports 4K×2K if the output
signal from the source device is 4K×2K resolution.
2) Please check and make sure the network cable insert to the RJ45
port well.
3) Restart the transmitter or receiver by pressing the reset button.
Q: Black screen happened on the display/monitor?
A: 1) Check if the length of the cable is within the specified range.
2) Reset the transmitter to re-built the connection.
Q: The display shows unusual color or no sound?
A: 1) Reset the transmitter or receiver to re-built the connection.
2) Check if the HDMI cables are connected well.
3) Reconnect the network cable.
It is recommended to use a length range within 2~70m network [NOTE]:
cable. If the cable is too short, there may be no display output
because the signal is too strong. If the cable is too long, the
output may be with poor quality.
The product name and brand name may be registered trademark of
related manufactures. and may be omitted on the user manual.™ ®
The pictures in this user manual are just for reference. The terms HDMI,
HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reser ve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
Follow the standard of IEEE-568B, It is recommended to
select a network cable with less loss and crosstalk.
1-Orange/white 2-Orange 3-Green/white
4-Blue 5-Blue/white 6-Green
7-Brown/white 8-Brown
Note: Up to 1 0 receivers can be cascaded, and the HDMI signal
output of it can be adaptive to the display resolution.
1 ) Connect the source device to the HDMI IN port of the transmitter with
an HDMI cable, and connect the HDMI OUT port of the receiver to the
display device with another HDMI cable.
2 ) Connect the CAT OUT port of the transmitter and the CAT IN port of
the receiver via a network cable (CAT5E/CAT6/CAT6A/CAT7). If
cascading is used, connect the CAT OUT port of the previous receiver
to the CAT IN port of the next receiver.
3 ) If using HDMI loop out, connect the display device to the HDMI OUT
port of the transmitter.
4 ) Plug the power supply into the device to get started.
2. Connection instruction
3. IR User Guide
Transmi ssion
Distance
CAT5E
CAT6/6A/7
≤40m
≤70m
LPCM/DTS-HD/DTS-Audio/Dolby Digital Plus
Dolby TrueHD/Dolby Digital/Dolby atmos
480i@60Hz 480p@60Hz 576i@ 50Hz、 、 、
576p@50Hz 720p@5 0/60Hz、 、
1080i@50/60Hz 1080p@50/60Hz、 、
3840x2160@24/25/30/60Hz
HDMI 2 0.
HDCP 2 2.
1a Contact discharge level 3
1b Air discharge level 3 Implementation
of the standard: IEC61000-4-2
0.7~1.2Vp-p(TMDS)
TM
TM
Produktspezifikationen
| Marke: | Epcom |
| Kategorie: | AV extender |
| Modell: | TT-676 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Epcom TT-676 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung AV extender Epcom
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung AV extender
- AV extender Approx
- AV extender Gigabyte
- AV extender Hama
- AV extender Manhattan
- AV extender Nedis
- AV extender Philips
- AV extender Roland
- AV extender Allnet
- AV extender Eminent
- AV extender König
- AV extender KEF
- AV extender Teufel
- AV extender Abus
- AV extender Lindy
- AV extender Tripp Lite
- AV extender Audio Pro
- AV extender Marmitek
- AV extender Marshall Electronics
- AV extender Black Box
- AV extender Techly
- AV extender Ebode
- AV extender Vision
- AV extender InFocus
- AV extender Kindermann
- AV extender Monoprice
- AV extender Ecler
- AV extender AG Neovo
- AV extender Genexis
- AV extender Digitus
- AV extender DataVideo
- AV extender LevelOne
- AV extender UTEPO
- AV extender Kramer
- AV extender Intellinet
- AV extender AJA
- AV extender Planet
- AV extender Peerless
- AV extender Steren
- AV extender AMX
- AV extender Vivotek
- AV extender Adder
- AV extender Siig
- AV extender TV One
- AV extender Rose
- AV extender Iogear
- AV extender StarTech.com
- AV extender Smart-AVI
- AV extender Aitech
- AV extender Gefen
- AV extender Avocent
- AV extender IMG Stage Line
- AV extender CYP
- AV extender ASSMANN Electronic
- AV extender ATen
- AV extender KanexPro
- AV extender SmartAVI
- AV extender Oehlbach
- AV extender Wentronic
- AV extender Crestron
- AV extender Accell
- AV extender Dynaudio
- AV extender Extron
- AV extender Atlona
- AV extender Rocstor
- AV extender WyreStorm
- AV extender Lightware
- AV extender SWIT
- AV extender Hall Research
- AV extender Matrox
- AV extender Blustream
- AV extender Rose Electronics
- AV extender MuxLab
- AV extender Seco-Larm
- AV extender Kanex
- AV extender C2G
- AV extender ConnectPro
- AV extender TechLogix Networx
- AV extender Micro Connect
- AV extender Intelix
- AV extender HELGI
- AV extender Liberty
- AV extender Comprehensive
- AV extender PureLink
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024