EMOS H4031 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EMOS H4031 (16 Seiten) in der Kategorie Gegensprechanlage. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
3010040310_31-H4031_00_01_WEB 140 × 160 mm
www.emos.eu
H4031
GB IP Door Camera Unit
CZ IP dveřní kamerová jednotka
SK IP dverová kamero jednotka
PL IP jednostka z kamerą do drzwi
HU IP Videotelefon kameraegység
SI Zunanja IP kamera
RS|HR|BA|ME IP kamera za vrata
DE IP-Türkamera-Einheit
UA Блок дверної IP-камери
RO|MD Cameră video de ușă IP
LT IP durų kameros blokas
LV IP durvju kameras komplekts
EE IP-uksekaamera üksus
BG IP външно тяло с камера
FR Caméra de porte IP
IT IP Unità della telecamera per porta
ES Unidad de cámara IP para puerta
NL IP Deurcamera-unit
4
4
5
6
AndroidiOS
iOSiPad Android
2.4 GHz 5 GHz
DC 12 V AC 100–240 V
50 Hz/60 Hz
Electric lock
Power supply
for unlocking
7
GB | IP Door Camera Unit
Package contents:
Wi-Fi doorbell
Cover (rain hood)
Wireless chime
Power supply
Connecting cable
Mounting material – screws
Manual
Technical specications
Wi-Fi doorbell
Power supply: 12 V DC
Resolution: 1 920 × 1 080
Lens: 2.69 mm JX-F37
Lens angle: 110°
PIR range: up to 4 m
Storage: SD card (max. 64 Gb), Cloud storage
Enclosure rating: IP44
Maximum number of users: 10
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
Wireless chime
Power supply: 3× AA (LR6) 4.5 V DC
Frequency: 433.92 MHz ±250 kHz
Range: ca. 80 m (open space)
Description of the device: g. 1a
A – Microphone
B – PIR sensor
C – Photoresistor
D – Lens
E – Status LED
LED ashing red and green: Battery charging.
LED ashing red: Waiting for network conguration.
LED ashing green: Conguring network.
LED glowing green: Working correctly.
LED glowing yellow: Powered from an external
source, charging complete, no batteries detected
(note: If no batteries are inserted, the indicator
only glows yellow).
LED not glowing red and green: Weak power supply
in standby mode.
F – Ring button
Description of the device: g. 1b
A – RESET button
B – SD card slot
C – USB port
D – Power supply
E – Input – door lock control
F – Alarm sensor
G – Battery slot
Description of the device: g. 1c
A – Status LED
LED ashing red: Working correctly.
LED glowing red: Voltage dropped below 3.3 V.
B – Speaker
C – Operating mode
D – Ringtone selection
E – Ringtone volume
Low
Medium
High
Installation: g. 2
1. Mount the cover (rain hood) of the doorbell onto a
wall using the enclosed screws.
2. The mounting height of the doorbell from the ground
should be 1 400–1 600 mm.
3. Make sure the PIR sensor is protected from direct
sunlight.
4. Connect the power supply to the input of the doorbell
according to the diagram.
5. Mount the doorbell using the screw on the underside
according to the diagram.
Pairing the wireless chime with the Wi-Fi
doorbell: g. 3
Press and hold the button for 3 seconds until you
hear a „ding-dong“ sound.
Then, press the ring button on the Wi-Fi doorbell.
The unit will make a sound and glow blue, indicating
successful pairing.
Unpairing the wireless chime from the Wi-Fi
doorbell:
Press and hold the button for 5 seconds until you
hear a double „ding-dong“ sound.
The devices are now unpaired.
Connecting the system: g. 4
The device only provides a volt-free contact for controlling
the electric door lock. Therefore, the device requires an
external power source to function properly.


Produktspezifikationen

Marke: EMOS
Kategorie: Gegensprechanlage
Modell: H4031

Brauchst du Hilfe?

Wenn Sie Hilfe mit EMOS H4031 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Gegensprechanlage EMOS

Bedienungsanleitung Gegensprechanlage

Neueste Bedienungsanleitung für -Kategorien-