EMOS E5201 Bedienungsanleitung


Lesen Sie kostenlos die ๐Ÿ“– deutsche Bedienungsanleitung fรผr EMOS E5201 (52 Seiten) in der Kategorie Wetterstationen. Dieser Bedienungsanleitung war fรผr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/52
1
www.emos.cz
E5201
GB
WIRELESS WEATHER STATION
CZ
BEZDRรTOVร METEOSTANICE
SK
BEZDRร”TOVร METEOSTANICA
PL
BEZPRZEWODOWA STACJA METEOROLOGICZNA
HU
VEZETร‰K Nร‰LKรœLI IDลJรRรS๎˜žรLLOMรS
SI
BREZลฝIฤŒNA METEOROLOล KA POSTAJA
RS HR| |BA
BEลฝIฤŒNA METEOROLOล KA STANICA
DE
DRAHTLOSE WETTERSTATION
UA
๎˜›๎˜š๎˜™๎˜˜๎˜—๎˜–๎˜•๎˜–๎˜”๎˜“๎˜’ ๎˜‘๎˜š๎˜•๎˜š๎˜–๎˜—๎˜–๎˜๎˜–๎˜๎˜Ž๎˜๎˜Œ๎˜“๎˜’ ๎˜‹๎˜—๎˜“๎˜Š๎˜•๎˜—๎˜Ž๎˜’
RO
STA๎˜‰IE METEO Fฤ‚Rฤ‚ FIR
LT
BELAIDฤ– ORO STOTELฤ–
LV
BEZVADU METEOROLOฤขISKฤ€ STACIJA
2606141000_31-E5201 105 ร— 148 mm
2
WIRELESS WEATHER STATION
The weather station displays a clock, an alarm clock with the snooze function, weather forecast and accurate data
on indoor and outdoor temperature.
Read carefully this manual before using this product.
SPECIFICATIONS:
radio controlled clock
temperature: indoor temperature 0 ยฐC to +50 ยฐC; outdoor temperature -50 ยฐC to +70 ยฐC
temperature accuracy: 0.1 ยฐC
wireless sensor: transmission frequency 433 MHz
radio signal range: up to 30 m in free space
maximum number of sensors: 1
length of the sensorโ€™s wire probe: 0.9 m
power: main station: 4.5 V/500 mA AC adapter (included), 3ร— 1.5 V AAA
sensor: 2ร— 1.5 V AAA
dimensions and weight: main station: 96 ร— 178 ร— 51 mm, 262 g (without batteries)
sensor dimensions: 110 ร— 38 ร— 26 mm, 47 g (without batteries)
Overview of icons and buttons
Main station โ€“ display
A
1
9
8
7
6
2 3 4
B C D
5
E
1. weather trend
2. weather forecast icon
3. DCF 77 signal reception icon
4. outdoor temperature
5. indoor temperature
6. activated alarm clock icon
7. sensor battery ๎˜Ÿat icon
8. DST icon
9. current time display
A - MODE โ€“ basic setting of weather station/alarm clock
B - โ€“ 1 step forwardโ–ฒ
C - โ€“ 1 step backward/activate alarm clockโ–ผ
D - SEARCH โ€“ search for outdoor sensor signal
E โ€“ activate the snooze feature
GB
3
Connector to connect power supply to the main station
Wireless sensor
A
4
312
1 โ€“ DCF signal reception icon
2 โ€“ channel number
3 โ€“ low battery icon
4 โ€“ outdoor temperature
A โ€“ activate reception of DCF signal (WAVE)
Adapter connection and battery installation
1. When you ๎˜žrst use the weather station, insert ๎˜žrst backup batteries 3ร— 1.5 V AAA into it and connect the power
supply to the connector on the back side.
2. Use only the supplied power source, otherwise it may damage the weather station. Press and hold the SEARCH
button, outside temperature value starts ๎˜Ÿashing.
3. Then insert the batteries 2ร— 1.5 V AAA into the wireless sensorโ€™s battery compartment on the back side.
Outdoor temperature is displayed on the weather station within 2 minutes.
When inserting batteries, make sure they have the correct polarity, otherwise they may damage the weather station
or sensor! Only use alkaline batteries of the same type, do not use rechargeable batteries. Low batteries in the sensor
are indicated by a red LED at the battery icon on the weather station display. Dispose of the used batteries in an
environmentally friendly way in accordance with the national legislation. Permanent backlight is only functional
when the weather station is connected to the power supply. The display is not lit when it is disconnected from the
power supply, but the backup batteries will preserve all the measured values.
We recommend placing the sensor on the north side of the house. The sensor is resistant to dripping water, however,
it should not be exposed to rain permanently. The range of the sensor may decrease substantially in urban areas. Also,
placing the sensor on metal objects will reduce its transmission range.
If you want to have the sensor placed in a room and measure the outdoor temperature, thread the wire probe
through a window which is not often used.
With frequent opening, the wire probe may be damaged or destroyed. The outdoor portion of the temperature wire
probe must be attached so as to prevent its tearing o๎˜ in the wind.


Produktspezifikationen

Marke: EMOS
Kategorie: Wetterstationen
Modell: E5201

Brauchst du Hilfe?

Wenn Sie Hilfe mit EMOS E5201 benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstationen EMOS

Bedienungsanleitung Wetterstationen

Neueste Bedienungsanleitung fรผr -Kategorien-