Meade TE636W Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Meade TE636W (34 Seiten) in der Kategorie Wetterstationen. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/34
TE636W
Slim Weather Forecaster with
Indoor/ Outdoor Temperature
and Humidity
USER MANUAL
INTRODUCTION
Thank you for selecting a Meade Instruments Weather Forecaster. This device combines
precise time keeping, monitoring and displaying of current temperature data from up to three
remote locations (additional sensors are required).
Meade Instruments is the world’s leading designer and manufacturer of telescopes for
professional and amateur astronomers – famous for its innovative, high performance telescopes
at affordable prices. Meade Instruments now brings that same passion for innovation and high
performance to its own line of precision, feature rich weather stations.
Please read this instruction manual so that you can get the most enjoyment out of your Meade
Instruments weather station.
In this package, you will find:
• One (1) main unit (receiver)
• One (1) single-channel remote sensor (transmitter)
• One (1) user manual
Please keep this manual handy as it contains practical instructions, technical specifications and
precautions.
2
INSTALLATION
Communications between the main unit (receiver) and the remote sensor (transmitter) is
wireless. This allows you to greater flexibility in choosing the location of remote sensor. The
remote transmits data up to 164 feet (50 meters) over an open, unobstructed area.
The remote sensor can be located either indoors or outdoors, allowing you chose where your
data is obtained.
NOTE:
• It is critical to power the remote sensor setting up the main unit. BEFORE
• It is critical to power up and communication between the remote sensor and the main unit test
BEFORE permanently mounting if outside.
BEFORE YOU BEGIN
• We recommend using for the remote sensor. If outdoor temperatures alkaline batteries
regularly fall below 32°F (0°C), we recommend using lithium batteries.
• Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct
power requirements.)
• ALWAYS install batteries in the remote sensor before the main unit.
• Insert batteries before first use, matching the polarity in the battery compartment.
• Press RESET after each battery change with a paper clip or similar tool.
• During initial set up, place the remote sensor close to the main unit.
• After reception is established (remote readings will appear on the main unit’s display),
position the remote sensor and the main unit within the effective transmission range of up to
164 feet (50 meters).
• The main unit must be placed indoors.
NOTE:
• Avoid pressing any buttons on the main unit before the remote readings are displayed.
• Transmission or reception range may be affected by trees, metal structures, and electronic
appliances, surrounding building materials and how the main unit and transmitter are
positioned.
• Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such
as doors, walls and furniture.
• Though the remote sensors are weather-resistant, they should be placed away from direct
sunlight, rain or snow. The optimal location for the remote sensor outdoors is under the eaves
on the north side of the building.
3


Produktspezifikationen

Marke: Meade
Kategorie: Wetterstationen
Modell: TE636W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Meade TE636W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten