Electro Harmonix Oceans 12 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Electro Harmonix Oceans 12 (23 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/23
1
OCEANS 12
Multifunction Dual Stereo Reverb
Congratulations on your purchase of the Oceans 12 our dual stereo reverb tour-,
de-force. Dive into uncharted sonic depths with its myriad features: two
simultaneous, independent, stereo reverb engines, series and parallel control for
the dual reverbs, 24 presets external expression and footswitch input, and more. ,
Plus, with an array of new controls like Tide for stereo image alteration, Lo-fi for
diffusion reduction, infinite attenuation, send level for FX LOOPs, and split reverbs,
your customization options are nearly limitless. T Oceans 12 is the reverb pedal he
to end all reverbs!
WARNING: Your Oceans 12 comes equipped with an Electro-Harmonix 9.6DC-200BI
power supply. The Oceans 12 requires at 9VDC with a center negative plug. Use 150mA
of the wrong adapter or a plug with the wrong polarity may damage your Oceans 12 and
void the warranty. Do not exceed 10.5VDC on the power plug. Power supplies rated for
less than 150mA will cause th Oceans 12 to act unreliably. e
- FEATURES -
• Two simultaneous, independent, stereo reverb engines
• Series or parallel dual reverb configurations
• 12 Reverb Types per engine yield a multitude of reverb effects
• Multiple modes available for each Reverb Type, including new modes exclusive
to the Oceans 12
• Easy pushbutton access to extra features like reverb tails, momentary effect
mode, and alternate knob functions
• 24 presets may be saved and recalled: one preset for each Reverb Type of
each reverb engine
• Two- -one expression/external-footswitch jack: control any combination of in
the Oceans 12 with an external expression pedal, or connect ’s knobs an
external 1-, 2- or 3-button footswitch for augmented pedal control
• Infinite hold, 1-second global pre-delay, tap tempo for Echo reverb
• Additional send/return signal routing option for mono setups
• High quality buffered analog bypass and soft switching
2
T C ABLE OF ONTENTS
Notes and Specifications 3
Reverb Types and Descriptions 3
Quick Start Guide 4
Summary Chart 10
Controls and LEDs 7
Dual Reverb Select Button and LEDs 7
Control Knobs 8
Reverb Type Knob, Preset LED, and Mini Knobs 12
Illuminated Buttons 13
Send/Return FX Loop 15
Mode Button and LEDs 17
Footswitches and LEDs 18
Connections 20
Reverb Type and Mini Knob Details 22
Dual Reverb 28
External Footswitch Functionality 30
Expression Pedal Use and Setup 31
Tap Tempo the Oceans 12 on 34
Preset Use and Setup 36
Restoring Factory Settings 38
Warranty Information and Compliance 39
4
Q S G UICK TART UIDE
PLUGGING IN THE OCEANS 12
1. Connect the supplied EHX9.6DC AC Adapter into the 9V jack at the
top of the Oceans 12. Plug the AC Adapter into an AC outlet.
2. Connect your guitar or other instrument into the IN jack using a L
standard 1/4” instrument cable. Connect the OUT jack to your amp L
with another standard 1/4” instrument cable.
3. For stereo operation, connect R OUT to another amp.
DIALING IN A STANDARD REVERB EFFECT
1. Ensure none of the buttons at the top left of the Oceans 12, like TAILS,
are lit. If any of the buttons are lit or blinking, press the button once
to disable it.
2. Ensure that REVERB A is selected by confirming that its SELECT LED
is lit. This LED is located in the center of the unit, in the section labeled
SELECT. If the SELECT LED of REVERB B is lit, press the small white
SELECT button to toggle reverb selection back to REVERB A.
3. Turn on REVERB A by pressing its footswitch located on the bottom
left of the Oceans 12. The white bypass LED should turn on.
4. Rotate the REVERB TYPE knob clockwise the ROOM setting for a to
standard reverb, if not already selected.
5. Set the two smaller knobs to the right of the TYPE knob to REVERB
their middle positions.
6. Set the decay time with the TIME knob, the tone with the TONE knob,
the predelay time with the PREDELAY knob, and the reverb volume
with the LVL knob. FX
CHOOSING REVERB TYPE A
1. Rotate the REVERB TYPE knob in either direction until the desired
REVERB TYPE LED is lit.
2. Check the table on the Oceans 12 below the mini knobs to see the
corresponding parameters that can be adjusted for the chosen Reverb
Type. Turn the mini knobs to experiment with different reverb effects.


Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Nicht kategorisiert
Modell: Oceans 12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix Oceans 12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Electro Harmonix

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-