Electro Harmonix Nano Big Muff Pi Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Electro Harmonix Nano Big Muff Pi (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
NANO BIG MUFF PI
Congratulations! You have just purchased the finest harmonic
distortion-sustain device developed to date for the electric guitar
player, now in a very compact pedal. The Nano Big Muff Pi works
and sounds identical in every way to our classic Big Muff Pi. We
took the Big Muff circuit and simply shrunk it, without any change
to its rich, creamy, violin-like sustaining sound.
-OPERATING INSTRUCTIONS-
SUSTAIN CONTROL — adjusts the amount of sustain and distortio n.
TONE CONTROL — provides a range of sounds from high treble to deep
bass. As you turn the knob clockwise the treble increases and bass
decreases.
VOLUME CONTROL — sets the output level.
Footswitch & Status LED - When the LED is lit; the Nano Big Muff effect
is active. When the LED is off, the Nano Big Muff is in True Bypass mode.
The Footswitch toggles between effect and bypass modes.
INPUT Jack – Nano Big Muff. The This ¼” jack is the audio input to the
input impedance presented at this jack is 130 k . Ω
AMP Jack – Nano Big Muff. This ¼” jack is the audio output from the
When the Nano Big Muff is in Bypass mode, the AMP jack is connected
directly to the INPUT jack.
9V Power Jack –The Nano Big Muff Pi is powered from a 9V battery or
you can use an optional 9VDC AC Adapter capable of delivering at least
25mA to the 9V power jack, such as the EHX9.6DC-200. The AC Adapter
must have a center negative plug. The battery may be left in or taken out
when using an AC Adapter. The Nano Big Muff has a current draw of
approximately 3mA at 9VDC.
We recommend the Electro-Harmonix US96DC-200BI AC Adapter to
power your Nano Big Muff Pi.
-CHANGING THE BATTERY-
To change the 9-volt battery, you must remove the 4 screws on the bottom
of the Nano Big Muff Pi. Once the screws are removed, you can take off the
bottom plate and change the battery. Please do not touch the circuit board
while the bottom plate is off or you risk damaging a component.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term. If you should need to return your
unit for service within the warranty period, please include a brief description of the
problem as well as your name, address, telephone number, copy of your receipt, and
a check or money order.
United States - $12
Canada - $ 15
Europe and outside countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2nd Street
Long Island City, NY, 11101
Attn: Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos on all X pedals visit us on the web at EH www.ehx.com
Email us at info@ehx.com


Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Nicht kategorisiert
Modell: Nano Big Muff Pi

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix Nano Big Muff Pi benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Electro Harmonix

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-