Electro Harmonix LUMBERJACK Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Electro Harmonix LUMBERJACK (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
LUMBERJACK
Congratulations on your purchase of the LUMBERJACK, the revolutionary new log
overdriver by ELECTRO-HARMONIX. The distortion character of the LUMBERJACK
changes depending on your playing dynamics, ranging from a powerful clean boost to
subtle torn-speaker overdrive to gritty distortion. The LUMBERJACK is housed in a
durable, compact die-cast chassis, and includes true-bypass switching to keep your
bypassed tone intact.
- CONTROLS -
BOOST Knob This knob controls the volume of your input signal. It can be used to
boost a quiet guitar, to achieve more distortion, or, when set to higher settings,
allows your natural guitar tone to blend with the overdriven signal.
LOG FACTOR Knob This knob controls the amount of logarithmic distortion
created by the LUMBERJACK. As you turn LOG FACTOR clockwise, overdrive
distortion increases.
VOL Knob Sets the output level of the LUMBERJACK.
FOOTSWITCH and LED The Footswitch selects whether the LUMBERJACK is
engaged or in true bypass mode. When the effect is engaged, the LED is lit.
INPUT Jack This ¼” jack is the audio input for the LUMBERJACK. The input
impedance is 1M .
AMP Jack This ¼” jack is the audio output from the LUMBERJACK. The output
impedance is 100 .
9V Power Jack Plug the output of the supplied AC adapter into the 9V power jack
located at the top of the LUMBERJACK. The LUMBERJACK requires 100mA at 9VDC
with a center negative plug. The LUMBERJACK accepts Boss/Ibanez style AC
Adapters.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to operate
due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product
from an authorized Electro-Harmonix retailer. Repaired or replaced units will then
be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the regions
listed below, please contact EHX Customer Service for information on warranty
repairs at info@ehx.com or +1- - -8300. USA and Canadian customers: 718 937
please obtain a (RA#) from EHX Customer Return Authorization Number
Service before returning your product. Include with your returned uni a written t:
description of the problem as well as your name, address, telephone number, e-
mail address, and RA#; and a copy of your receipt clearly showing the purchase
date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33 STREET RD
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the
product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
- FCC COMPLIANCE -
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. If the device is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communications and void the user's authority to guarantee the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help .
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules.


Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Nicht kategorisiert
Modell: LUMBERJACK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix LUMBERJACK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Electro Harmonix

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-