Electro Harmonix 2880 Foot Controller Bedienungsanleitung

Electro Harmonix Nicht kategorisiert 2880 Foot Controller

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Electro Harmonix 2880 Foot Controller (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
2880 SUPER MULTI-TRACK LOOPER
Foot Controller
- DESCRIPTION -
Congratulations on your purchase of the Electro-Harmonix remote Foot
Controller accessory that was designed work with the 2880 Super Multi-
track Looper! The Foot Controller allows you to use your 2880 remotely,
with your feet! The perfect performance pedal giving you total hands free
control as you play. It gives you foot access to the following switches: Track
select, New Loop, Record, Play, Octave and Reverse.
- SETUP -
To properly setup the Foot Controller with a 2880 you will need one standard
guitar cable with a ¼” plug on each end:
Plug one end of the guitar cable into the 2880 Footswitch jack.
Plug the other end of the guitar cable into the Foot Controller’s jack.
Upon connecting the 2880 Foot Controller to the main unit, all 6 LEDs (on
the FC) will light briefly for 1 second.
- CONTROLS -
The following descriptions detail the functions of all of the Footswitches and
LEDs (lights) on the 2880 Foot Controller. All 6 switches and LEDs on the
Foot Controller duplicate the switches and LEDs on the 2880 with the same
name.
Important: The Electro-Harmonix Foot Controller obtains all of its power
from the 2880 Super Multi-track Looper. Use only a standard ¼” guitar cable
to connect the Foot Controller to the 2880. A standard guitar cable has Tip
and Sleeve conductors. The Foot Controller does not require batteries or an
AC Adapter.
1. NEW LOOP Footswitch When you press the NEW LOOP footswitch, –
you will enter record ready mode. Press the NEW LOOP switch again and you
will exit the record ready mode. If you press the NEW LOOP switch while
recording, it will end the recording and put you into playback mode.
2. NEW LOOP LED Will blink rapidly when you are in record ready mode. –
3. RECORD Footswitch The RECORD Footswitch (FSW) is a duplicate of –
the RECORD FSW on the 2880 itself. Please refer to the 2880 User Manual
for instructions on how the RECORD FSW works.
4. PLAY Footswitch The PLAY FSW is a duplicate of the PLAY FSW on –
the 2880. Please refer to the 2880 User Manual for instructions on how the
PLAY FSW works.
5. RECORD and PLAY LEDs These two LEDs duplicate the Recording –
and Playing LEDs on the 2880.
6. TRACK SELECT Footswitch The track select switch is used to select –
the active track. Each press of this footswitch will advance you to the next
track. Pressing the TRACK SELECT Footswitch while Track 4 is active will
cycle you back to Track 1.
7. TRACK SELECT LED The TRACK SELECT LED will light only when –
Track 1 is the active track, otherwise this LED will be off.
8. REVERSE Footswitch Hitting the REVERSE FSW toggles between –
Forward and Reverse modes.
9. REVERSE LED When the REVERSE LED is lit, you are in REVERSE –
mode and your loop will play backwards. When the REVERSE LED is off, you
are in FORWARD mode and your loop will play forwards.
10. OCTAVE Footswitch . If you are Playing back a loop at its original –
pitch and tempo and then hit the OCTAVE FSW, the loop’s tempo and pitch
will be lowered by exactly one octave. Hit the OCTAVE FSW again and the
loop will return to its original pitch and tempo.
11. OCTAVE LED The Octave LED will light up when the octave function –
is engaged.
12. ¼” Jack Plug the guitar cable that is plugged into the 2880 –
Footswitch jack into this ¼” jack on the Foot Controller. Both power and
data will travel through the single guitar cable.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to operate
due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product
from an authorized Electro-Harmonix retailer. Repaired or replaced units will then
be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the regions
listed below, please contact EHX Customer Service for information on warranty
repairs at info@ehx.com or +1- - -8300. USA and Canadian customers: 718 937
please obtain a (RA#) from EHX Customer Return Authorization Number
Service before returning your product. Include with your returned unit: a written
description of the problem as well as your name, address, telephone number, e-
mail address, and RA#; and a copy of your receipt clearly showing the purchase
date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the
product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com


Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Nicht kategorisiert
Modell: 2880 Foot Controller

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix 2880 Foot Controller benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Electro Harmonix

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-