Edelkrone JibONE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edelkrone JibONE (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Before operating your edelkrone,
please watch the users manual video.
http://edel.kr/jbnv2
1. WHAT’S IN THE BOX & THE BASICS
2. MOUNTING ON A TRIPOD
3. MOUNTING THE BATTERY BRACKET
4. ATTACHING THE COUNTERWEIGHT
5. PULLING OUT THE EXTENSIONS
6. ADJUSTING THE OPERATION ANGLE
7. ATTACHING THE CAMERA
8. BALANCE ADJUSTMENT & SAFETY LOCK
9. EXTENSION LENGTH INDICATORS
10. COUNTERWEIGHTS
11. TENSION ADJUSTMENT
12. TURNING ON JIBONE v2
13. LOOSENING THE KNOBS
14. WARNINGS
15. START USING
TABLE OF CONTENTS
1. WHAT’S IN THE BOX & THE BASICS 2. MOUNTING ON A TRIPOD 3. MOUNTING THE BATTERY BRACKET 4. ATTACHING THE COUNTERWEIGHT 5. PULLING OUT THE EXTENSIONS 6. ADJUSTING THE OPERATION ANGLE 7. ATTACHING THE CAMERA
1.
2.
3.
4.
5.
6.
JibONE v2
Motor unit (with information screen,
On/Off button, DC in, shutter
trigger port, battery bracket port)
JibONE v2 length extension screws
Tension adjustment wheel
Angle adjustment knob
Camera plate (with 3/8” mounting
screw and spirit level)
7.
8.
9.
10.
11.
Body (3/8” tripod mounting port, 1/4
accessory port, Cold Shoe)
Safety lock
Shutter trigger extension cable
Main counterweight (1 kg/2.2 lbs)
Counterweight (1 kg/2.2 lbs) (3 pcs.)
1
10 11
1
Battery Bracket
Motor Unit
9
2
3
4
8
7
65
1. Place the body of JibONE v2 on the tripod
making sure it's aligned.
2. Tighten it by turning the mounting wheel.
1. Align the main counterweight parts as shown.
2. Attach to JibONE v2 by turning the butterfly screw clockwise.
Attach the battery bracket to the motor unit using the screws included with
the battery bracket.
1. Lift the lever above to release the top arm.
2. Repeat below to release the bottom arm.
3. Grip the camera plate bar to pull out the extensions.
4. Extend the camera plate by loosening the butterfly
screw.
5. Push the levers back to their original positions.
1. Loosen the angle adjustment knob by turning counterclockwise.
2. Adjust your operation angle (JibONE v2 has five different operation angles).
3. Tighten the angle adjustment knob back.
1. Align your FlexTILT Head v3 or any tripod head with the camera plate as shown.
2. Tighten the mounting wheel.
3. Attach your camera to your FlexTILT Head v3 or any tripod head.
1
1
23
1
2
3
4
2
*Battery Bracket sold separately.
2
CAUTION
Keep hands clear of moving profiles.
A detailed video explaining the mounting process can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to mount the battery bracket can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the counterweight can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to extend JibONE v2 can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to adjust the operation anglev can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the camera can be found at:
http://edel.kr/jbnv2
www.edelkrone.com
DISPOSAL OF THE PRODUCT & WARNINGS
For more information and tips about your JibONE v2, please watch the user’s
manual videos at: http://edel.kr/jbnv2
Should the product become damaged beyond repair, or if you wish to
dispose of it, it must be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or
the local authorities. Observe the regulations of your area and country that
relate to the disposal of electronic products.
* Keep your electronic Motion Control Unit away from all sorts of liquids.
* In order to preserve your Motion Control Unit and battery performance at their best, use the
exact same type of batteries with an equivalent level of charge during dual-battery operation.
* Do not attempt to disassemble or modify any internal parts of your Motion Control Unit. If the
device appears to be malfunctioning, discontinue use immediately and contact support for
qualified service.
* Never force a different type of connector into a port.
* Never use or store your Motion Control Unit in areas subject to extreme temperatures, or high
levels of vibration.
* If your motion control unit becomes unresponsive, disconnect and re-connect the power
source. Make sure your DC adapter is plugged in or your batteries are properly charged. If the
problem persists, contact our support team.
* Environmental factors may affect your Motion Control Unit’s performance. Keep your product
away from environmental hazards such as dust or heavy resonance. Do not use chemical
materials to clean your product.
* If there is an impairment on the power or connector cable, stop using the Motion Control Unit
immediately.
* Avoid dropping or causing physical damage to your Motion Control Unit.
* Do not place heavy objects on top of your Motion Control Unit.
**edelkrone cannot be held responsible for damage caused by improper use or
modification of the product.
* Rated Voltage: 7.4V-14.8V (2 x 7.4V Parallel LP-E6 or NP-F Battery / AC-DC Adapter )
Rated Current: 2A Operating Temperature: -5°C to +45°C
15. START USING
Download the edelkrone App to your mobile device from the App Store or
Google Play. Links can be found at www.edelkrone.com/products/jibone-v2
To operate JibONE v2, hold On/Off button down until the opening bar in the
information screen is full-filled.
JibONE v2 is now ready for smart pairing or manual pairing through
Bluetooth/Wifi.
After pairing the devices, you are now ready to use your JibONE v2.
Just keep following the instructions on your mobile device or visit
manuals.edelkrone.com for a detailed video instruction.
1.
2.
3.
4.
Make sure your mobile device’s Bluetooth connection is on.
Always start using with fully charged batteries.
A detailed video explaining the edelkrone App can be found at: http://edel.kr/jbnv2
9. EXTENSION LENGTH INDICATORS 10. COUNTERWEIGHTS8. BALANCE ADJUSTMENT & SAFETY LOCK 11. TENSION ADJUSTMENT 12. TURNING ON JIBONE v2 13. LOOSENING THE KNOBS 14. WARNINGS
You may need extra counterweights to
keep your setup balanced. You can find the
recommended counterweight usage
scenarios below.
*While JibONE v2 is fully extended
Camera + FlexTILT Head or any tripod head (1.5-2.4 kg)
Camera + HeadONE + FlexTILT Head or any tripod head (2.2-3.4 kg)
Camera + 2 HeadONEs + Tilt Kit v2 (2.6-4.2 kg)
Camera + HeadPLUS Full Setup (2.9-5 kg)
1 pcs.
2 pcs.
3 pcs.
4 pcs.
1. Attach the batteries.
2. Plug the cable into the "DC IN" socket.
3. Press and hold the On/Off button for a second to turn on JibONE v2. 1. Make sure to correctly adjust the leg distance of your tripod while operating or adjusting
the JibONE v2 extensions for a balanced setup.
2. If you’d like to make adjustments or carry your JibONE v2, make sure the safety lock is
on, remove your camera and insert the extensions back in. Otherwise, the device will be
unstable and may cause damage.
3. Make sure you attach the counterweights tightly and correctly.
If you are unable to loosen the knobs,
you can insert a screwdriver into the
holes to help you turn the knobs.
2
3
1
3
2
1
You can tighten or loosen the tension
adjustment wheel for smoother motions.
Tension Adjustment Wheel
1
2
1. Pull the safety lock as shown to mobilize
JibONE v2.
2. Slide the counterweight to balance the setup.
! The safety lock must be OFF to operate
JibONE v2. You can push it back in to turn the
safety lock on when you are not filming or you
are changing positions while filming.
S
S
C
C
x
Setup
Counterweight
1. When you extend JibONE v2, make sure the numbers match.
2. Setups are balanced with different counterweight locations and extension
lengths based on the weight of the setups. 1
2
A detailed video explaining the length indicators can be found at:
http://edel.kr/jbnv2
A detailed video explaining the counterweights can be found at:
http://edel.kr/jbnv2
A detailed video explaining the tension adjustment can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to turn on JibONE v2 can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to loosen the knobs can be found at:
http://edel.kr/jbnv2
A detailed video explaining the balance adjustment can be found at:
http://edel.kr/jbnv2


Produktspezifikationen

Marke: Edelkrone
Kategorie: Nicht kategorisiert
Modell: JibONE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edelkrone JibONE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Edelkrone

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-