EarthQuaker Devices Spatial Delivery Bedienungsanleitung

EarthQuaker Devices niet gecategoriseerd Spatial Delivery

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EarthQuaker Devices Spatial Delivery (2 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
O P E R A T I O N M A N U A L
©2018 EarthQuaker Devices LLC
www.earthquakerdevices.com
<<< Power Requirements >>>
<<< Tech Specs >>>
• Current Draw: 68mA
• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
always recommend pedal-speciîš¿c, transformer-isolated wall-wart power supplies or multiple
isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal speciîš¿c power supplies do not îš¿lter
dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
• Input Impedance: 500K Ohm • Output Impedance: <1K Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will îš¿x it. Should you encounter any
issues, please email info@earthquakerdevices.com.
<<< Flexi-Switching >>>
This device features Flexi-Switch
â„¢
Technology! This relay-based, true bypass switching style
allows you to simultaneously use momentary and latching-style switching.
• For standard latching operation, tap the footswitch once to activate the effect and then tap
again to bypass.
• For momentary operation, hold the footswitch down for as long as you’d like to use the effect.
Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to pass signal.
<<< Controls >>>
Range: Adjusts the sensitivity of the
envelope in Up and Down mode. In
Sample and Hold mode, this controls
the speed.
Mode Toggle: This toggles between
Upward Sweep, Downward Sweep
or Sample and Hold.
Resonance: This is the îš¿lter feedback
control, it adds more body and ring to the
îš¿lter voice.
Filter: This crossfades between high
pass and low pass îš¿lters and allows you
to get everything in between. High pass
is fully counterclockwise, low pass is full
clockwise and center is band pass. This
is much more useful than a simple switch
because it allows you to blend the îš¿lters
for different sounds!
1
2
3
4
Welcome to your brand new Spatial Delivery
â„¢! The Spatial Delivery is an oddball, a voltage
controlled envelope îš¿lter that allows you to step outside the universe of funk while reinforcing
your secret love affair with auto-wah. It has 3 modes: , Up Sweep Down Sweep and Sample
and Hold Range (1). With , Resonance (3) and controls you can get super emphasized Filter (4)
îš¿lter sweeps in the Up and modes. The Down Range (1), in combination with pick attack,
controls the sensitivity and reaction time of the envelope and thus the width of the frequency
sweep. The higher the Range and harder the attack equals a faster reaction time and higher
frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz
after the Spatial Delivery and you’ve got a real nice resonant, cut-through-the-mix lead tone.
Crank the controls back up and you’re a neo-bedroom rock god. In the Sample and Hold mode
the îš¿lter is controlled by random voltage and the Range controls the speed. Add a sub octave
into the mix (before or after) and you’ve just created a deep fried space droid computer freak-out.
The îš¿lter can be cross faded between high pass (counterclockwise), band pass (center) and low
pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink
of oscillation and adds more body and ring to the îš¿lter voice. We recommend placing the Spatial
Delivery îš¿rst in your signal chain. However, due to its envelope control, experimenting with
pairing and signal chain placement can take the potential of the Spatial Delivery even further.
Each Spatial Delivery is hand made bit by damn bit in silver studded Akron Ohio.
4
1 2 3
<<< Suggested Settings >>>
Modular Synthesizer
Create urgent and futuristic sequences to
traject your music into the cosmos. Make
chords feel like apreggiated time passages.
Sassy as Funk
Grab your favorite dominant 7th chord and
don’t ght the feelin’.
Neptune
Create the backdrop of space craters opening
and closing on distant galaxy planets.
Slow Space Song
I went to outer space once... I could never îš¿nd
my way back... Can you hear me earthlings?...
Anyone out there?...

Produktspezifikationen

Marke: EarthQuaker Devices
Kategorie: niet gecategoriseerd
Modell: Spatial Delivery

Brauchst du Hilfe?

Wenn Sie Hilfe mit EarthQuaker Devices Spatial Delivery benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd EarthQuaker Devices

EarthQuaker Devices

EarthQuaker Devices LedgeS Bedienungsanleitung

29 August 2024
EarthQuaker Devices

EarthQuaker Devices Afterneath Bedienungsanleitung

19 August 2024
EarthQuaker Devices

EarthQuaker Devices Park Fuzz Sound Bedienungsanleitung

15 August 2024
EarthQuaker Devices

EarthQuaker Devices Bit Commander Bedienungsanleitung

14 August 2024
EarthQuaker Devices

EarthQuaker Devices Spatial Delivery Bedienungsanleitung

14 August 2024
EarthQuaker Devices

EarthQuaker Devices Rainbow Machine Bedienungsanleitung

2 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024