Delta Dore Tyxal+ DME Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Delta Dore Tyxal+ DME (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
www.deltadore.com
2xLS 14500 - 3,6 V - 5,8 Ah - Lithium
Consumption stand-by : 9,5 µA
Consumption : 27 mA max
[868 - 868.6] MHz and
[868.7 - 869.2] MHz
100 m 300mÝ
Maximum power radio < 10 mW,
receiver category: 2
-10°C / +70°C
-20°C / +60°C
IP IP 55
75%
Important product
information ( )¸
420 gr.
71,5 x 186 x 105 mm
Instructions
Important
Product
Informations
Contents
DME TYXAL +
EN Installaon guide
* Up to 10 years valid under the conditions of use specifi ed in the installation instructions and
the General Conditions of Sale
- 2 -
N°1
N°2
For optimal operation, please comply with the following recommendations:
In the event of non-compliance, the product may present malfunctions or
may not function optimally.
Installation height: between 0.8 m and 1.2 m
Install the motion detector vertically, with its
high detection zones parallel to the ground.
If the detector is installed at an angle,
detection reliability may be compromised.
2. Location
1. Presentation
DME TYXAL+ is a passive infrared motion detector, de-
signed to detect the infrared radiation emitted by human
bodies.
This motion detector aims to protect the outside of a
building by detecting intrusions prior to penetration into
the premises.
As soon as a presence is detected, it raises the alarm.
• Associated to a control unit:
- alarm signal.
- pre-alarm signal: as soon as a person enters the
protected zone, a sound and visual signal (outdoor siren)
warns you of the imminent alarm.
Read the entire guide before starting
to install the device.
!
Note
This product detects temperature differences between moving and background targets within the
detection zone.
If the target remains motionless, the motion detector cannot detect it. This may affect the detec-
tor's maximum detection range.
EN
2. Location
- 4 -
ÊË
Ì
Do not touch the lenses.
!
Remove the top of the detec-
tor unit.
Remove the fi xing screw from
the top cover and withdraw
the cover.
Remove the fi xing screws
Remove the sensor/electronic card
Do not touch the mirrors.
¹
Remove the fi xing screws and
remove the base from the rear
mount.
3. Mounting
25 mm max.
Î
Attach the rear mount
to the wall using the fi xing
screws provided
Ï
Attach the base onto the rear mount
EN
Wall mount Post mount
Metal strip
4. Activation


Produktspezifikationen

Marke: Delta Dore
Kategorie: Nicht kategorisiert
Modell: Tyxal+ DME

Brauchst du Hilfe?

Wenn Sie Hilfe mit Delta Dore Tyxal+ DME benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Delta Dore

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-