DAP Audio PDI-200 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für DAP Audio PDI-200 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
PDI-200 V1
Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands – – – –
Ordercode: D1944
MANUAL
ENGLISH
1
PDI-200 Passive direct injection box
D1944
Warning
Every person involved with the installation, operation and maintenance of this system has to:
ï‚· be qualified
ï‚· follow the instructions of this manual
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail and request an RMA prior to shipping the fixture.
aftersales@highlite.nl
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a device is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
2
PDI-200 Passive direct injection box
D1944
Description of the device
Features
The PDI-200 is a two-channel passive direct injection box. It converts your HI-Z signal into a LO-Z signal.
You do not need a battery or phantom power for this box.
ï‚· Roadproof housing with rubber feet
ï‚· Compact size
ï‚· Low distortion
ï‚· Ground lift switch
ï‚· Attenuation switch (0dB, -20dB, -40dB)
ï‚· 20dB fixed natural attenuation
ï‚· 6,3 mm Jack input
ï‚· 6,3 mm Jack link connection
ï‚· Balanced 3-pin XLR output
ï‚· Dimensions: 140 x 110 x 55 mm (LxWxH)
ï‚· Weight: 1,1 kg
ï‚· No power supply needed
Overview
Fig. 01
Fig. 02
Input 1 attenuator
Link output 1
Input 1
Link output 2
Input 2
Input 2 attenuator
Ground lift switch 2
Balanced 3- XLR output 2 pin
Balanced 3- XLR output 1 pin
Ground lift switch 1


Produktspezifikationen

Marke: DAP Audio
Kategorie: Nicht kategorisiert
Modell: PDI-200

Brauchst du Hilfe?

Wenn Sie Hilfe mit DAP Audio PDI-200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert DAP Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-