Dangerous Music Liaison Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dangerous Music Liaison (24 Seiten) in der Kategorie Mischpult. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
LIAISON®
The Audio Neural Network
U S E R G U I D E
SAFETY REVIEW
The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying this product
Certain precautions should be taken when using electrical products. Please observe the safety hints by reading the manual and obtaining qualified
help if necessary to adhere to the precautions.
1. Always use a properly grounded power supply cord with this product. Please do not defeat the ground pin on the mains plug. This connection
provides earth to the chassis and signal grounds inside the device for clean and quiet operation.
2. Avoid high temperature operation in equipment racks by providing air circulation. The number one killer of electronic gear is HEAT. Vented rack
panels may look like wasted space to an interior decorator, but they look like beauty to a technician or equipment designer! If the front panel is
hot, it is roasting inside the box.
3. Avoid areas of high magnetic fields. The steel chassis is designed to shield the circuits from EMI and RFI (magnetic and radio interference).
When installing equipment in racks, it is prudent to put power amplifiers and large power supplies at least several rack spaces, if not in a different
rack, away from equipment that deals with low level signals. Separation of high level and low level equipment can pre-empt trouble caused by
heat and EMI.
4. Care should be taken to avoid liquid spills around equipment. If a spill occurs, please shut off the gear and disconnect the mains. A qualified
technician should investigate accidents to prevent further equipment damage or personnel hazards caused by spills.
5. If one is uncomfortable with opening gear and changing jumpers or making adjustments, please seek qualified help if necessary.
6. If adjustments or jumper changes are required, please disconnect the mains plug before opening the top. Dropped screws or tools on a live
circuit board can manifest themselves as burn marks and smoked components. While we feel your pain, (been there) subsequent damage is not
covered by the warranty.
Dangerous Music Incorporated reserves the right to change the specifications or modify the designs of its equipment. Sending in the registration
card is our way of keeping in touch with users of our equipment should this become necessary. Registration information is always kept confidential
and never disclosed to third parties for any reason. Company contact information is on the last page of this manual.
!
!
!
!
!
!
!
The CE sign on this product signifies the fact that the Additional Switching System® has been tested and verified to
conform to the applicable standards of 89/336/EEC.EN55103-1 (emissions) EN61000-2 (immunity) and EN60065:2002
(safety requirements)
This product uses components of the types and quantities that comply with the EC RoHS standard 2002/95/EC. A list
of suppliers and materials is available from DMI. We tightly control production to use top quality materials.
READ TH
| iii
READ THIS FIRST
DO NOT INCORRECTLY CONNECT MIC PREAMPS TO THE LIAISON!
To avoid damaging your hard won gear and voiding your warranty, follow the simple steps below.
•Do not connect gear equipped with phantom power- such as mic preamps and channel strips -
to the insert loops in your Liaison. Activating the phantom power will damage the electronics in
the monitor and parallel processing paths and void the warranty instantly!
It may also damage other outboard gear that is parked down-stream of the offending piece by
applying the phantom power to the inputs.
A mic pre output as the source connected to either Buss A or Buss B Input is perfectly OK -
phantom power is applied to the INPUT pins of a mic pre.
Correct Path: Mic > Mic Pre Input > Mic Pre Line Out > Liaison Buss Input
•If you cannot follow the rst rule and choose to connect a mic preamp to the Liaison inserts,
DO NOT engage the phantom power.
The Dangerous Music Team


Produktspezifikationen

Marke: Dangerous Music
Kategorie: Mischpult
Modell: Liaison

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dangerous Music Liaison benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischpult Dangerous Music

Bedienungsanleitung Mischpult

Neueste Bedienungsanleitung für -Kategorien-