CyberPower OL8000RT3U Bedienungsanleitung

CyberPower Unterbrechungsfreies Stromversorgungssystem OL8000RT3U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower OL8000RT3U (23 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/23

User’s Manual

OL6000RT3U

OL8000RT3U

OL10000RT3U

CyberPower Systems (USA), Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379

Phone: 877-297-6937

Fax: 952-403-0009

www.CPSww.com

K01-0000195-02

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual

thoroughly before attempting to unpack, install, or operate the UPS.

CAUTION! The UPS must be connected to a grounded AC power

outlet with fuse or circuit breaker protection. DO NOT plug the UPS into

an outlet that is not grounded. If you need to power-drain this equipment,

turn off and unplug the unit.

CAUTION! The battery can power hazardous components inside the

unit, even when the AC input power is disconnected.

CAUTION! The UPS should be placed near the connected equipment

and easily accessible.

CAUTION! To prevent the risk of fire or electric shock, install in a

temperature and humidity controlled indoor area, free of conductive

contaminants. (Please see specifications for acceptable temperature and

humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock, do

not remove cover. No user serviceable parts inside. Refer servicing to

qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric shock,

battery circuit is not isolated from AC power source; hazardous voltage

may exist between battery terminals and ground. Test before touching.

CAUTION! To reduce the risk of fire, connect the UPS to a branch

circuit with amperes (OL6000) / 50 amperes (OL8000) / 60 amperes 40

(OL10000) maximum over-current protection in accordance with the

National Electric Code, ANSI/NFPA 70.

CAUTION! The AC outlet where the UPS is connected should be close

to the unit and easily accessible.

CAUTION! Please use only -marked mains cable, (e.g. the mains UL

cable of your equipment), to connect the UPS to the AC outlet.

CAUTION! Please use only -marked power cables to connect any UL

equipment to the UPS.

CAUTION! When installing the equipment, ensure that the sum of the

leakage current of the UPS and the connected equipment does not

exceed 3.5mA.

CAUTION! The OL8000/OL10000 models are permanently-connected

equipment and only qualified maintenance personnel may carry out

installations.

CAUTION! Do not unplug the unit from AC Power during operation, as

this will invalidate the protective ground insulation.

CAUTION! To avoid electric shock, turn off and unplug the unit before

installing the input/output power cord with a ground wire. Connect the

ground wire prior to connecting the line wires!

CAUTION! Do not use improper size power cord as it may cause an

d to your equipment and cause fire hazards. amage

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT

EQUIPMENT! Under no circumstances this unit should be used for

medical applications involving life support equipment and/or patient care.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce

the risk of fire, do not use with or near aquariums. Condensation from

the aquarium can come in contact with metal electrical contacts and

cause the machine to short out.

CAUTION! Do not dispose of batteries in fire the battery may as

explode.

CAUTION! Do not open or mutilate the battery, released electrolyte is

harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and high short

circuit current. The following precaution should be observed when

working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handle s.

CAUTION! The unit has a dangerous amount of voltage. When the

UPS indicators is on, the units may continue to supply power thus the

unit s outlets may have a dangerous amount of voltage even when it s not ’ ’

plugged in to the wall outlet.

CAUTION! Make sure everything is turned off and disconnected

completely before conducting any maintenance, repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor before

any other cables are connected.

WARNING! (Fuses): To reduce the risk of fire, replace only with the

same type and rating of fuse.

DO NOT INSTALL THE UPS WHERE IT WOULD BE EXPOSED TO

DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

DO NOT BLOCK OFF VENTILATION OPENINGS AROUND THE

HOUSING!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR

DRYERS TO UPS OUTPUT SOCKETS!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR

SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES AND

THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED

PERSONNEL AWAY FROM BATTERIES!

UNPACKING

Power module

Input / Output terminal block cover

(Only for OL8000RT3U/OL10000RT3U)

User’s manual Register card

Rackmount left rail * 2 sets Rackmount right rail * 2 sets

Phone line

USB communication cable

Serial Interface Cable (RS-232)

Battery module

Rackmount ears (Stands) (2) * 2 sets

Tie plate (1) * 1 set

Flat head screws M5X8L (8) * 2 sets :

Pan head screws M5X12L (12) * 2 sets :

Plastic washers (8) * 2 sets

Screw hole dust covers ( ) * 2 sets 10

Power cords

PowerPanel® Business Edition software CD

Produktspezifikationen

Marke:	CyberPower
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	OL8000RT3U
Display-Typ:	LCD
Akustische Signale:	Ja
Breite:	433 mm
Tiefe:	660 mm
Gewicht:	103000 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	12V/9AH
Akkuladezeit:	5 h
Akku-/Batterietechnologie:	Plombierte Bleisäure (VRLA)
Höhe:	266.7 mm
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Paketgewicht:	126750 g
Zertifizierung:	UL1778, CSA C22.2 NO.107.3-05, FCC DOC Class A
Gehäusematerial:	Stahl
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 45 °C
Luftfeuchtigkeit bei Lagerung:	0 - 95 %
Geräuschpegel:	55 dB
Ausgangsspannung Gesamtverzerrungsfaktor THD:	5 %
Formfaktor:	Rackmount/Tower
Ausgangsleistung:	7200 W
Mitgelieferte Software:	PowerPanel
Nachhaltigkeitszertifikate:	RoHS
Verpackungsabmessungen (BxTxH):	600 x 900 x 638 mm
Eingangsfrequenz:	40/70 Hz
Höhe bei Betrieb:	0 - 3000 m
Anzahl Batteriezellen:	20
Leistungsfaktor:	0.99
Effizienz:	95 %
Anzahl der AC-Ausgänge:	4 AC-Ausgänge
Eingangs-Betriebsspannung (min):	200 V
Eingangs-Betriebsspannung (max):	240 V
Ausgangskapazität:	8 kVA
Ausgangs-Betriebsspannung (min):	200 V
Ausgangs-Betriebsspannung (max):	240 V
Typische Backup-Zeit bei halber Belastung:	13 min
Typische Backup-Zeit bei voller Belastung:	5 min
EMI/RFI Lautstärkefilter:	Ja
Druckanstiegsschutz:	Ja
Akustische Alarm-Modi:	Batterieaustausch
Überlastung Schutz:	Ja
Rack-Kapazität:	6U
Hot-Swap-Batterie:	Ja
Höhe bei Lagerung:	0 - 15000 m
Ausgang Anschlüsse:	3 x NEMA L6-30R & 1 x Hardware Terminal Block
Crest-Faktor:	3:1
Kaltstart:	Ja
Notstrom Aus (EPO):	Ja
Überspannungsschutz-Funktionen:	Network, Telephone