CyberPower CP425SLG Bedienungsanleitung

CyberPower Unterbrechungsfreies Stromversorgungssystem CP425SLG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CP425SLG (2 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 39 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

SE425G/SX500G/SX550G/SX625G

CP425SLG/CP425HG/CP550SLG/CP550HG/CP625HG

User’s Manual

K01-0000218-03

Thank you for purchasing a CyberPower product. Please take a few minutes to register your product at www.cpsww.com/registration.

Registration certifies your product's warranty, confirms your ownership in the event of a product loss or theft and entitles you to free technical

support. Register your product now to receive the benefits of CyberPower ownership.

(SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation of the unit.

Read this manual thoroughly before attempting to unpack, install, or operate your UPS.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive

contaminants. (Please see specifications for acceptable temperature and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.

CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power is disconnected.

CAUTION! The UPS must be connected to an AC power outlet with fuse or circuit breaker protection. Do not plug into an outlet that is not

grounded. If you need to de-energize this equipment, turn off and unplug the unit.

CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before installing a computer component.

CAUTION! Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment,

ANSI/NFPA 75.

CAUTION! To reduce the risk of fire, connect only to a circuit provided with 20 amperes maximum branch circuit over current protection in

accordance with the National Electric Code, ANSI/NFPA 70.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell products for life support or medical

applications. DO NOT use in any circumstance that would affect operation and safety of life support equipment, any medical applications or

patient care.

DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or electric shock, do not use with or near an aquarium. Condensation

from the aquarium can cause the unit to short out.

DO NOT USE THE UPS ON ANY TRANSPORTAT ION! To r educe the risk of fire or electric shock, do not use the unit on any transportation

such as airplanes or ships. The effect of shock or vibration caused during transit and the damp environment can cause the unit to short out.

INTRODUCTION

Thank you for selecting a CyberPower Systems Uninterruptable Power Supply (UPS). This UPS meets the Energy Efficiency Certification of the

California Energy Commission (CEC). CyberPower Systems is dedicated to producing energy efficient products to maximize our contribution to

the environment.

UNPACKING

Inspect the UPS upon receipt. The box should contain the following:

(a) UPS unit (b) User’s manual (c) USB device cable (except for SE425G)

*PowerPanel® Personal Edition software is available on our website. Please visit www.cpsww.com and go to the Software Section for

free download.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT

1. Ensure that the equipment plugged into the UPS does not exceed the UPS unit’s rated capacity. If the rated capacities of the unit are

exceeded, an overload condition may occur and cause the UPS unit to shut down or the circuit breaker to trip.

2. There are many factors that can affect the amount of power that your electronic equipment will require. For optimal system performance

keep the load below 80% of the unit’s rated capacity.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately upon receipt. However, after receiving a new UPS, to

ensure the battery’s maximum charge capacity, it is recommended that you charge the battery

for at least 8 hours. Your UPS is equipped with an auto-charge feature. When the UPS is

plugged into an AC outlet, the battery will automatically charge whether the UPS is turned on or

turned off.

2. With the UPS unit turned off and unplugged, connect your computer, monitor, and any other peripherals requiring battery backup into the

battery power supplied outlets. Plug the other peripheral equipment (eg. printer, scanner, speakers, etc.) into the full-time surge protection

outlets. DO NOT plug a laser printer, paper shredder, copier, space heater, vacuum cleaner, sump pump, or other large electrical

device into the “Battery and Surge Protected Outlets”. The power demands of these devices will overload and possibly damage the

unit.

3. To protect a fax, phone, or modem line, connect a telephone cable from the wall jack outlet to the IN jack of the

UPS. Connect a telephone cable from one of the UPS OUT jacks to the modem port on the computer. The other

UPS OUT jack can be used to protect a telephone or fax machine.

4. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is

protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air

conditioner, refrigerator, copier, etc.). The warranty prohibits the use of extension cords, outlet strips,

and surge strips in conjunction with the UPS unit.

5. Press the power switch to turn the unit on. The Power On indicator light will illuminate green and the unit will “beep” twice.

6. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To correct this, turn the UPS off and unplug at

least one piece of equipment from the battery power supplied outlets. Make sure the circuit breaker is depressed and then turn the UPS on.

7. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.

8. To store the UPS for an extended period of time, cover it and store with the battery fully charged. While in storage, recharge the battery every

three months to ensure optimal battery life.

9. Ensure the wall outlet and UPS are located near the equipment being attached for proper accessibility.

DESCRIPTION

 Battery and Surge Protected Outlets

The unit has four battery powered and surge protected outlets to ensure temporary uninterrupted operation of your equipment during a

power failure. (DO NOT plug a laser printer, paper shredder, copier, space heater, vacuum cleaner, sump pump, or other large

electrical device into the “Battery and Surge Protected Outlets.” The power demands of these devices will overload and possibly

damage the unit.)

 Full-Time Surge Protection Outlets

The unit has four surge suppression outlets.







Power Switch

To turn the UPS on, press the power button for approximately 2 seconds - you will hear a constant tone (1 second) - and release after a

short beep.

To turn the UPS off, press the power button for approximately 2 seconds - you will hear a constant tone (1 second) - and release after two

short beeps.

Alarm setting: The audible alarm can be turned OFF or ON by quickly pressing the POWER button twice. The default setting is for the Alarm

On. To turn the Alarm Off, quickly press the power button twice. You will hear two short beeps when the Alarm is turned Off. To turn the

Alarm back ON, quickly press the power button twice. You will hear a single short beep when the Alarm is turned On. *When the Alarm is

turned Off, there will be no audible notification when the UPS reaches a low battery state.







Power On Indicator

This LED is illuminated when the utility power is normal and the UPS outlets are providing power, free of surges and spikes.

 Electrical Wiring Fault Indicator

This LED indicator will illuminate to warn the user that a wiring problem exists, such as bad ground, missing ground or reversed wiring. If

this is illuminated, disconnect all electrical equipment from the outlet and have an electrician verify the outlet is properly wired. The unit will

not provide surge protection without being plugged into a grounded and properly wired wall outlet.

 Communication Protection Ports

Communication protection ports will protect any standard modem, fax, or telephone line. (RJ11)







Circuit Breaker

Located on the side of the UPS, the circuit breaker provides overload and fault protection.







USB Port to PC (except for SE425G)

The port allows connection and communication between the USB port on the computer and the UPS unit. The UPS communicates its

status to the PowerPanel® Personal Edition software.







Outlets Designed for AC Adapters

The UPS unit has four widely-spaced outlets, so AC power adapters can be plugged into the UPS without overlapping or blocking adjacent

outlets.

Problem Possible Cause Solution

Full-time surge protection outlets

stop providing power to

equipment. Circuit breaker

button is projecting from the side

of the unit.

Circuit breaker has been tripped due

to an overload.

Turn the UPS off and unplug at least one piece of

equipment. Wait 10 seconds, reset the circuit breaker by

pressing the button, and then turn the UPS on.

The UPS does not perform

expected runtime.

Battery not fully charged. Recharge the battery by leaving the UPS plugged in.

Battery is worn out. Contact CyberPower Systems about replacement batteries

at tech@cpsww.com

The UPS will not turn on.

The on/off switch is designed to

prevent damage from rapidly turning

it off and on.

Turn the UPS off. Wait 10 seconds and then turn the UPS

on.

The unit is not connected to an AC

outlet. The unit must be connected to a 110/120V 50/60Hz outlet.

The battery is worn out. Contact CyberPower Systems about replacement batteries

at tech@cpsww.com

Mechanical problem. Contact CyberPower Systems at tech@cpsww.com

The frequency is outside of the

operating range of 47-63Hz..

Turn the UPS off. Make sure the frequency range is within

47-63Hz. Or you can turn the UPS on in battery mode.

PowerPanel® Personal Edition is

inactive (all icons are gray).

*except for SE425G

The USB cable is not connected. Connect the USB cable to the UPS unit and an open USB

port on the back of the computer.

The USB cable is connected to a

bad USB port. Check for a different USB port and plug the cable in.

The unit is not providing battery

power.

Shutdown your computer and turn the UPS off. Wait 10

seconds and turn the UPS back on. This should reset the

unit.

Additional troubleshooting information can be found at “Support” at

www.CPSww.com

DEFINITIONS FOR LED INDICATORS & AUDIBLE ALARMS

Power ON

Wiring Fault

Alarm

CONDITION

On Off Off Normal

BASIC OPERATION

INSTALLING YOUR UPS SYSTEM

TROUBLESHOOTING

IMPORTANT SAFETY WARNINGS

PRODUCT REGISTRATION

On* Off Beep twice

every 30 seconds

Utility Failure- The UPS is providing power to battery power-supplied

outlets from its battery.

On* Off Rapid Beeping

every 1/2 second

Utility Failure- The UPS is providing battery power. Rapid beeping

indicates the unit will run out of power shortly.

Off Off Constant tone

Battery Overload - Occurs when connected equipment exceeds the

listed capacity of the UPS. Turn the UPS off, unplug at least one

piece of equipment from battery outlets, wait 10 seconds, reset the

circuit breaker and turn the unit on.

On/Off On None

Electrical Wiring Fault - indicates a wiring problem with the This

AC outlet such as bad ground, missing

ground, or reversed wiring.

Disconnect all electrical equipment from the outlet and have an

electrician check the outlet to ensure proper wiring.

Off Off Constant tone Utility Failure- The frequency is beyond 47-63Hz. The UPS will not

turn on in Line Mode.

* When it beeps, the power on LED will flash accordingly.

Model SE425G CP425SLG

CP425HG/CP425HGa

SX500G SX550G/CP550SLG

CP550HG/CP550HGa

SX625G

CP625HG/CP625HGa

Capacity 425VA/255W 425VA/255W 500VA/300W 550VA/330W 625VA/375W

Nominal

Input Voltage 120Vac

Input Frequency

50/60Hz ± 3Hz

On-Battery

Output Voltage

120Vac ± 5%

On-Battery

Output Frequency

50Hz/60Hz ± 1% (auto-sensing)

Max. Load for

UPS Outlets

(4 Outlets)

425VA/255W 425VA/255W 500VA/300W 550VA/330W 625VA/375W

Max. Load for

Full-Time Surge

Protection outlets

(8 Outlets)

8 Amps 12 Amps

On-Battery Output

Wave Form Simulated Sine Wave

Operating

Temperature + 32°F to 104° F / 0° C to 40° C

Operating

Relative Humidity

0 to 90% non-condensing

Size

(W x H x D)

9.8” x 5.8” x 3.3”

250 x 147 x 83 mm

Net Weight 4 lbs 4.2 lbs 5.3 lbs 5.9 lbs 6 lbs

Typical Battery

Recharge Time

8 hours typical from total discharge

Typical

Battery Life 3 to 6 years, depending on number of discharge/recharge cycles

Battery Sealed Maintenance Free Lead Acid Battery

Safety Approvals

UL1778(UPS), cUL CSA C22.2 No.107.3-05, FCC/DoC Class B

SYSTEM FUNCTION BLOCK DIAGRAM

EMI Filter

Surge

Suppressor

Charger

AC/DC Battery

Inverter

Input Output

Normal Mode

Battery Mode

Advanced Energy-Saving Design

The GreenPower UPS™ has a high-efficiency charger, which makes it the most energy-efficient

UPS in its class. The advanced high-frequency charging system significantly improves charging

efficiency and conserves energy. As a result of this advanced design, the GreenPower UPS™

uses less energy compared to competitive models. The GreenPower UPS™ is manufactured in

accordance with the Restriction on Hazardous Substances (RoHS) directive making it one of the

most environmentally-friendly UPS on the market today.

Read the following terms and conditions carefully before using the CyberPower SE425G/SX500G/SX550G/SX625G and

CP425SLG/CP425HG/CP550SLG/CP550HG/CP625HG (the “Product”). By using the Product you consent to be bound by and

become a party to the terms and conditions of this Limited Warranty and Connected Equipment Guarantee (together referred to as

this “Warranty”). If you do not agree to the terms and conditions of this Warranty, you should return the Product for a full refund prior to

using it.

Who is Providing this Warranty?

CyberPower Systems (USA), Inc. (“CyberPower”) provides this Limited Warranty.

What Does This Warranty Cover?

This warranty covers defects in materials and workmanship in the Product under normal use and conditions. It also covers equipment

that was connected to the Product and damaged because of the failure of the Product.

What is the Period of Coverage?

This warranty covers the Product for three years. Connected equipment is covered for as long as you own the Product.

Who Is Covered?

This warranty only covers the original purchaser. Coverage ends if you sell or otherwise transfer the Product.

How Do You Get Warranty Service?

1. Before contacting CyberPower, identify Your Product model number, the Purchase Date, and each item of Connected Equipment.

2. Email us at tech@cpsww.com or Call us at (877) 297-6937.

3. If your product requires warranty service you must provide a copy of your dated purchase receipt or invoice.

How Do You Open A Connected Equipment Claim?

1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or

send us an e-mail message at claims@cpsww.com for instructions, within 10 days of the occurrence.

2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment. Have

information on all applicable insurance or other resources of recovery/payment that are available to the Initial Customer and Request

a Claim Number.

3. You must provide a dated purchase receipt (or other proof of the original purchase) and provide a description of the damage to your

connected equipment.

4. Pack and ship the product to CyberPower and, if requested, the item(s) of Connected Equipment, a repair cost estimate for the

damage to the Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping

label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and

you must pay the cost of the repair estimate.

How Long Do I Have To Make A Claim?

All claims must be made within ten days of the occurrence.

What Will We Do To Correct Problems?

CyberPower will inspect and examine the Product.

If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if

CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund

to you the full purchase price you paid for the Product (purchase receipt showing price paid is required).

If it appears that our Product failed to protect any equipment plugged into it, p2-we will also send you forms for making your claim for the

connected equipment. We will repair or replace the equipment that was damaged because of the failure of our Product or pay you the

fair market value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will use Orion Blue Book, or

another a third-party valuation guide, or eBay, craigslist, or other source to establish that amount. Our maximum liability is limited to

$75,000 for the SE425G and CP425SLG/CP425HG, $100,000 for the SX500G/SX550G/SX625G and

CP550SLG/CP550HG/CP625HG.

Who Pays For Shipping?

We pay when p2-we send items to you; you pay when you send items to us.

What Are Some Examples Of What This Warranty Does Not Cover?

1. This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data

that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software.

2. This Warranty does not cover or apply to: misuse, modification, operation or storage outside environmental limits of the Product or

the equipment connected to it, nor for damage while in transit or in storage, nor if there has been improper operation or maintenance,

or use with items not designed or intended for use with the Product, such as laser printers, appliances, aquariums, medical or life

support devices, etc.

What Other Limitations Apply?

1. This Warranty does not apply unless the Product and the equipment that was connected to it were connected to properly wired and

grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any

adapters or other connectors.

2. The Product must have been plugged directly into the power source and the equipment connected to the Product must be directly

connected to the Product and not “daisy-chained” together in serial fashion with any extension cords, another Product or device

similar to the Product, surge suppressor, or power tap. Any such installation voids the Limited Warranty.

3. The Product and equipment connected to it must have been used properly in a suitable and proper environment and in

conformance with any license, instruction manual, or warnings provided with the Product and the equipment connected to it.

4. The Product must have been used at all times within the limitations on the Product’s VA/Watt capacity.

5. The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.

What Limitations Apply if there is Connected Equipment Guarantee (CEG) Coverage for My Product?

The Product was designed to eliminate disrupting and damaging effects of momentary (less than 1ms) voltage spikes or impulses

from lightning or other power transients. If it can be shown that a voltage spike lasting longer than 1ms has occurred, the occurrence

will be deemed outside the rated capabilities of the Product and the Limited Warranty is void. CyberPower Does Not Cover or

Undertake Any Liability in Any Event for Any of the Following:

1. Loss of or damage to data, records, or software or the restoration of data or records, or the reinstallation of software.

2. Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded and code-compliant

120 volt power lines in the United States and Canada; transients, surges or spikes on standard telephone land lines, PBX telephone

equipment lines or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to

fluctuations in data transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission.)

3. Damage from any circumstance described as excluded above with respect to the Product.

4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse, misuse or alteration of either the

product or the Connected Equipment.

5. CyberPower excludes any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee.

CyberPower excludes any liability for direct, indirect, special, incidental or consequential damages, whether for damage to or loss of

property [EXCEPT FOR (AND ONLY FOR) the specific limited agreement of CyberPower to provide certain warranty benefits

regarding "Connected Equipment" under this Warranty], loss of profits, business interruption, or loss of information or data. NOTE:

Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may

not apply to you.

6. The Product is not for use in high-risk activities or with aquariums. The Product is not designed or intended for use in hazardous

environments requiring fail-safe performance, or for use in any circumstance in which the failure of the Product could lead directly to

death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support

device (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk

Activities or with aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or with Aquariums. ANY

SUCH USE IS IMPROPER AND IS A MISUSE OF THE PRODUCT.

Where Can I Get More Information?

The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded.

CyberPower is the warrantor under this Limited Warranty.

For further information please feel free to contact CyberPower at CyberPower Systems (USA), Inc. 4241 12th Ave E., STE 400,

Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.

CyberPower Systems encourages environmentally sound methods for disposal and recycling of its UPS products.

Please dispose and/or recycle your UPS and batteries in accordance to the local regulations of your state.

TECHNICAL SPECIFICATIONS

Limited Warranty and Connected Equipment Guarantee

CYBERPOWER GREENPOWER UPS™ TECHNOLOGY

Produktspezifikationen

Marke:	CyberPower
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	CP425SLG
Akustische Signale:	Ja
Produktfarbe:	Schwarz
Akku-/Batterietyp:	12V/3.6AH
Akkuladezeit:	8 h
Akku-/Batterietechnologie:	Plombierte Bleisäure (VRLA)
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Zertifizierung:	UL1778, cUL 107.3, FCC DOC Class B
Kabellänge:	1.52 m
LED-Anzeigen:	Ja
Formfaktor:	Kompakt
Ausgangsleistung:	255 W
Nachhaltigkeitszertifikate:	RoHS
Eingangsfrequenz:	50/60 Hz
Abmessungen (B x T x H) (in Zoll):	9.75 x 3 x 6 "
Anzahl der AC-Ausgänge:	8 AC-Ausgänge
Ausgangskapazität:	0.425 kVA
Modem (RJ-11) Port:	1
AC-Steckertypen:	NEMA 5–15R
Typische Backup-Zeit bei halber Belastung:	7 min
Typische Backup-Zeit bei voller Belastung:	2 min
Nominale Eingang Spannung:	96-140 V
Nominale Ausgang Spannung:	120 V
Hot-Swap-Batterie:	Nein
Gewicht (imperial):	5 Pfund
Anstieg der Energiemenge:	890 J