CyberPower CP1500AVRLCDTAA Bedienungsanleitung

CyberPower Unterbrechungsfreies Stromversorgungssystem CP1500AVRLCDTAA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CP1500AVRLCDTAA (10 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

INTELLIGENT UPS SERIES

CP850/1000/1350/1500AVRLCD

USER MANUAL

YOUR ULTIMATE ALLY IN POWER

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com

FEATURES

1. Power Switch

2. Power On Indicator

3. LCD Module Display

4. Display/Select Button

5. Mute/Enter Button

6. Battery and Surge Protected Outlets

7. Full-Time Surge Protection Outlets

8. Circuit Breaker

9. DB9/USB Ports

10. Communication Protection Ports

11. Wiring Fault Indicator (red)

12. Coax/Cable/DSS Surge Protection

13. Widely-spaced Outlets

CP850/1000A LCVR D CP RLCD1350AV CP1500A LCVR D

1313

6 7

Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed

power protection, operation, and performance during the lifetime of the product. Please take a

few minutes to register your product at: www.CyberPowerSystems.com/registration.

Registration certiﬁes your product’s warranty, conﬁrms your ownership in the event of a

product loss or theft, and entitles you to free technical support. Register your product now to

receive the beneﬁts of CyberPower ownership.

CAUTION! To prevent the risk of ﬁre or

electric shock, install in a temperature and

humidity controlled indoor area free of

conductive contaminants. (Please see

speciﬁcations for acceptable temperature

and humidity range).

CAUTION! To reduce the risk of electric shock,

do not remove the cover except to service the

battery. Turn o and unplug the unit before

servicing the batteries. There are no user ser-

viceable parts inside except for the battery.

CAUTION! Hazardous live parts inside can be

energized by the battery even when the AC

input power is disconnected.

CAUTION! The UPS must be connected to an

AC power outlet with fuse or circuit breaker

protection. Do not plug into an outlet that is

not grounded. If you need to de-energize this

equipment, turn o and unplug the unit.

CAUTION! To avoid electric shock, turn o the

unit and unplug it from the AC power source

before installing a computer component.

CAUTION! To reduce the risk of ﬁre, connect

only to a circuit provided with 20 amperes

maximum branch circuit over current protec-

tion in accordance with the National Electric

Code, ANSI/NFPA 70.

CAUTION! Not for use in a computer room as

deﬁned in the Standard for the Protection of

Electronic Computer/Data Processing Equip-

ment, ANSI/NFPA 75.

CAUTION! Do not dispose of batteries in a

ﬁre. The batteries may explode.

CAUTION! Do not open or mutilate batteries.

Released electrolyte is harmful to the skin and

eyes. It may be toxic.

DO NOT USE FOR MEDICAL

OR LIFE SUPPORT EQUIPMENT!

CyberPower Systems does not sell products

for life support or medical applications. DO

NOT use in any circumstance that would

aect operation and safety of life support

equipment, any medical applications or pa-

tient care.

DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of ﬁre or electric shock, do

not use with or near an aquarium. Condensa-

tion from the aquarium can cause the unit to

short out.

DO NOT USE THE UPS

ON ANY TRANSPORTATION!

To reduce the risk of ﬁre or electric shock, do

not use the unit on any transportation such

as airplanes or ships. The eect of shock or

vibration caused during transit and the damp

environment can cause the unit to short out.

PRODUCT REGISTRATION

IMPORTANT SAFETY WARNINGS (SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully

during installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate your UPS.

INSTALLING YOUR UPS SYSTEM

UNPACKING

Inspect the UPS upon receipt.

The box should contain the following:

(a) UPS unit

(b) User’s manual

(d) Function Setup Guide

PowerPanel® Personal software is available

on our website. Please visit www.cyberpower-

systems.com and go to the Software Section

for a free download.

OVERVIEW

The CP850/1000/1350/1500AVRLCD provides

complete power protection from utility power

that is not always consistent.

The CP850/1000AVRLCD features 1080 Joules

and the CP1350/1500AVRLCD features 1500

Joules of surge protection.

The unit provides long lasting battery backup

during power outages with maintenance free

batteries.

The CP850/1000/1350/1500AVRLCD ensures

consistent power to your computer system

and includes software that will automatically

shut down your computer system during a

utility power loss.

AUTOMATIC VOLTAGE REGULATOR

The CP850/1000/1350/1500AVRLCD stabiliz-

es inconsistent utility power to nominal levels

that are safe for equipment. Unstable utility

power can be damaging to important data and

hardware. With Automatic

Voltage Regulation (AVR),

damaging voltage levels

are corrected to safe

levels. AVR automatically

increases low utility power

to a consistent and safe

110/120 volts.

DETERMINE THE POWER

REQUIREMENTS OF YOUR EQUIPMENT

1. Ensure that the equipment plugged into

the UPS does not exceed the UPS unit’s

rated capacity. If the rated capacities of the

unit are exceeded, an overload condition

may occur and cause the UPS unit to shut

down or the circuit breaker to trip.

2. There are many factors that can aect

the amount of power that your electronic

equipment will require. For optimal system

performance keep the load below 80% of

the unit’s rated capacity.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately

upon receipt. However, after receiving a

new UPS, to ensure the battery’s maximum

charge capacity, it is recommended that

you charge the battery for at least 8 hours.

Your UPS is e quipped with an auto charge

feature. When the UPS is plugged into an

AC outlet, the battery will automatically

charge whether the UPS is turned on or

turned o.

Note: This UPS is designed with a safety

feature to keep the system from being turned

on during shipment. The ﬁrst time you turn

the UPS on, you will need to have it connect-

ed to AC power or it will not power up.

2. With the UPS unit turned o and unplugged,

connect your computer, monitor, and any

other peripherals requiring battery backup

into the battery power supplied outlets. Plug

the other peripheral equipment (eg. printer,

scanner, speakers, etc.) into the full time

surge protection outlets.

DO NOT plug a laser printer, paper shredder,

copier, space heater, vacuum cleaner, sump

pump or other large electrical device into

the “Battery and Surge Protected Outlets”.

The power demands of these devices will

overload and possibly damage the unit.

3. Plug the UPS into a 2 pole, 3 wire grounded

receptacle (wall outlet). Make sure the wall

branch outlet is protected by a fuse

or circuit breaker and does not service

equipment with large electrical demands

(e.g. air conditioner, refrigerator, copier,

etc.). The warranty prohibits the use of

– continued

Produktspezifikationen

Marke:	CyberPower
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	CP1500AVRLCDTAA
Display-Typ:	LCD
Akustische Signale:	Ja
Breite:	99 mm
Tiefe:	356 mm
Gewicht:	11340 g
Mitgelieferte Kabel:	USB-Kabel
Produktfarbe:	Schwarz
Akkuladezeit:	8 h
Höhe:	279 mm
Energieschutzeigenschaften:	Überlastschutz
Stecker:	NEMA 5-15P
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Verpackungsbreite:	200.66 mm
Verpackungstiefe:	444.5 mm
Verpackungshöhe:	374.65 mm
Paketgewicht:	11340 g
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Kabellänge:	2 m
Reaktionszeit:	4 ms
LED-Anzeigen:	Fault, Power
Temperaturbereich bei Lagerung:	-15 - 45 °C
Luftfeuchtigkeit bei Lagerung:	0 - 95 %
Anzahl unterstützter Akkus/Batterien:	2
Formfaktor:	Mini Tower
Ausgangsleistung:	900 W
Verkabelungstechnologie:	10/100/1000Base-T(X)
Eingangsfrequenz:	57/63 Hz
Höhe bei Betrieb:	0 - 3048 m
Anzahl der AC-Ausgänge:	12 AC-Ausgänge
USV-Topologie:	Line-Interaktiv
Eingangs-Betriebsspannung (min):	90 V
Eingangs-Betriebsspannung (max):	142 V
Ausgangskapazität:	1.5 kVA
Ausgangs-Betriebsspannung (min):	120 V
Ausgangs-Betriebsspannung (max):	120 V
AC-Steckertypen:	NEMA 5-15R
Typische Backup-Zeit bei halber Belastung:	12 min
Typische Backup-Zeit bei voller Belastung:	3 min
Wellenform:	Sine
Output Frequenz:	60 Hz
EMI/RFI Lautstärkefilter:	Ja
Akustische Alarm-Modi:	Alarm when on battery, Fault, Low battery alarm, Overload alarm
Hot-Swap-Batterie:	Ja
Höhe bei Lagerung:	0 - 15239 m
Überspannungsschutz-Funktionen:	Koaxial
Anstieg der Energiemenge:	1500 J