CyberPower CPS200SU Bedienungsanleitung

CyberPower Batterie CPS200SU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CPS200SU (2 Seiten) in der Kategorie Batterie. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Congratulations on your purChase

Thank you for selecting the CyberPower CPS200SU Power

Inverter + USB. The information contained in this brochure

explains the features and operation of the CPS200SU.

Please take a few moments to read this manual.

paCkage Contents

•(1) Power Inverter + USB

•(1) Product Registration Card

•(1) User Manual

Features

1. 2 AC Power Outlets (120v)

2. DC Power Plug

3. 2.1 Amp USB Charging Port

4. Power Status Indicator LED

5. High-Speed Cooling Fan

operating & storage

Operating

•DO NOT allow water or other liquids to come into contact

with the inverter.

•Ambient air temperature should be 32 F 104 F (0 C 40 C). ° – ° ° – °

Keep inverter out of direct sun light.

•Keep the inverter’s ventilation slot unobstructed to ensure

airowtotheunit.DO NOT place any items on or over

the inverter during operation. The unit will shut down if it

overheats.

Storage

•Proper storage temperature rang is 32 F 86 F (0 C 30 C)° – ° ° – °

•Store the inverter in a cool and dry environment.

•Avoid exposing the inverter to heating elements, direct

sunlight or high humidity when not in use.

speCiFiCations

•Model Number: CPS200SU

•Input Voltage: 10.5 to 15.5 Volts

•Output Power: 200 Watts (max)

•Output Voltage: 120 Volts

•Output Frequency: 60Hz

•USB Voltage: 5Vdc

•Output Waveform: Simulated Sine Wave

•Protection Features: Low Voltage, Overheat,

Overload, Short Circuit

saFety inFormation

• operatetheCPS200SUnearammablematerials,DO NOT

fumes or gasses.

•Always use the inverter where there is adequate ventilation.

DO NOT obstruct the ventilation slots.

•NEVER immerse the unit in water.

•Proper cooling is essential when operating the inverter.

Refrain from placing the inverter near a vehicle’s heat vent or

in direct sunlight.

•Always turn the inverter off when not in use by removing it

from the DC accessory socket.

•Check the warning labels on battery chargers or adapters

before connecting them to the inverter. connect DO NOT

battery chargers or adapters with warnings about using with

inverters.

trouBleshooting

Power Inverter does not provide power:

1. Poor contact with DC power outlet

Ensure the inverter is securely plugged into the vehicle’s DC

power outlet.

2. Automotive electrical system requires ignition to be on

Turn vehicle ignition to “Accessory” position.

3. Vehicle DC power outlet fuse is blown

Check vehicle fuse panel and replace damaged fuse.

4. Overheating

Allow inverter to cool. Ensure that there is adequate

ventilation around the unit.

5. Vehicle battery voltage below 10.5 volts

Unplug inverter and start the vehicle to charge the battery.

6. Vehicle battery voltage higher than 15.5 volts

Check your vehicle’s user guide for trouble shooting.

7. Inverter is overloaded

Ensure load does not exceed the units Continuous Power

rating(seespecications).

teChniCal support

Please contact our Tech Support department with installation,

troubleshooting, or general product questions.

•Phone: 1-877-297-6937

•Email: tech@CPSww.com

•Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

power inverter + usB

Cps200su

user manual

LIMITED WARRANTY

CyberPower warrants this CPS200SU (the “CPS Product”)

to be free from material and manufacturing defects for three

years. If a defect results in product failure during its normal

use, CyberPower’s sole responsibility is to repair or replace

(at its sole option) the CPS Product. IF YOU DO NOT AGREE

TO THE TERMS AND CONDITIONS OF THIS WARRANTY,

YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND

PRIOR TO USING IT.

Who is Providing this Warranty, Who is Covered?

What Does It Cover? And for How Long?

CyberPower Systems (USA), Inc. (“CyberPower”) provides this

Limited Warranty. It only covers the original purchaser and ends

if you no longer own the CPS Product. This warranty covers

defects in materials and workmanship in the CPS Product

under normal use and conditions. This warranty covers the CPS

Product for as long as you own the CPS Product.

1. Call (877) 297-6937 or write to CyberPower, 4241 12th Ave.

E., STE 400, Shakopee, MN 55379 or send an e-mail to

claims@CPSww.com for instructions.

2. Identify the Product, the Purchase Date.

3. Provide a dated Proof-of-Purchase receipt (or other proof of

the original purchase) and provide a description of the defect.

4. Pack and ship the product to CyberPower, and all claim

forms that CyberPower provides to you. Show the Claim

Number on the shipping label or include it with the product.

You must prepay all shipping costs, you are responsible for

packaging and shipment, and you must pay the cost of the

repair estimate.

5. Do each of these within ten days of the occurrence.

What Will CyberPower Do To Correct Problems?

CyberPower will inspect and examine the CPS Product. If the

CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s expense,

or CyberPower will refund the full purchase price you paid for

the CPS Product (purchase receipt showing price paid

is required).

FCC NOTICE

This equipment has been tested and found to comply with

the limits for a Class B Digital Device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures: (1) Reorient or relocate the receiving antenna. (2)

Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. (4) Consult the

dealer or an experienced radio/TV technician for help. Any

specialaccessoriesneededforcompliancemustbespecied

in the instruction.

CAUTION: A shielded-type power cord is required in order to

meet FCC emission limits and also to prevent interference to

the nearby radio and television reception. It is essential that

only the supplied power cord be used. Use only shielded cables

to connect I/O devices to this equipment.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

LimitedWarranty,andalsoallowstheopportunitytobenotied

product enhancements, upgrades, and other announcements.

Registration is quick and easy at www.CPSww.com/register.

CONTACT INFORMATION

CyberPower Systems, Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CPSww.com

K01-0000237-00

respective owners.

Please join CyberPower in caring for the

environment by recycling this manual.

Produktspezifikationen

Marke:	CyberPower
Kategorie:	Batterie
Modell:	CPS200SU
Breite:	76.2 mm
Tiefe:	36 mm
Gewicht:	249.47 g
Produktfarbe:	Schwarz
Höhe:	138.43 mm
Zweck:	Universal
Betriebstemperatur:	0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	154.94 mm
Verpackungstiefe:	60.96 mm
Verpackungshöhe:	256.54 mm
Paketgewicht:	326.5 g
Kabellänge:	0.6 m
Gehäusematerial:	ABS Synthetik
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 45 °C
Anzahl der USB-Anschlüsse:	1
USB-Version:	2.0
Ausgangsspannung:	120 V
Ausgangsleistung:	200 W
Eingangsspannung:	10.5-15.5 V
Eingangsfrequenz:	- Hz
Starkstromtyp:	DC-to-AC
Anzahl der AC-Ausgänge:	2 AC-Ausgänge
Output Frequenz:	60 Hz
Stromstärke (maximal):	15 A