CyberPower CP900EPFCLCD Bedienungsanleitung

CyberPower Unterbrechungsfreies Stromversorgungssystem CP900EPFCLCD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für CyberPower CP900EPFCLCD (10 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 70 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10



K01-0000190-00

CP900EPFCLCD

User’s Manual

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions. Please read and follow all instructions carefully

during installation and operation of the unit. Read this manual thoroughly before attempting to unpack,

install, or operate your UPS.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker

protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to de-energize this

equipment, turn off and unplug the UPS.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems

does not sell products for life support or medical applications. DO NOT use in any circumstance that

would affect the operation and safety of life support equipment, medical applications, or patient care.

CAUTION! Hazardous live parts inside can be energized by the battery even when the AC input power

is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled

indoor area, free of conductive cont ions for acceptable temperature aminants. (Please see specificat

and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the battery.

There are no user serviceable parts inside, except for the battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before

servicing the battery or installing a computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use with or

near aquariums. Condensation from the aquarium can come in contact with metal electrical contacts

and cause the machine to short out.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the following:

(1) UPS Unit x 1; (2) Telephone Cable x 1; (3) USB Cable x 1; (4) User Manual x 1; (5) Management

software Disk x 1; (6) Function Setup Guide x 1

OVERVIEW

The CP900EPFCLCD provides automatic voltage regulation for inconsistent utility power. The

CP900EPFCLCD features 405 Joules of surge protection, and provides battery backup during power

outages. The CP900EPFCLCD ensures consistent power to your computer system and its included

software will automatically save your open files and shut down your computer system during a utility

power loss.

SUPPORTS Active PFC POWER SUPPLIES

This CyberPower UPS system supports High Efficiency power supplies with Active Power Factor

Correction (Active PFC). Active PFC is used to improve the efficiency of power delivery. The current US

Energy Star® Program Requirements for Computers (version 5.0) mandates Active PFC for all power

supplies over 100 watts. Additionally, programs such as 80 Plus® are often used to identify high

efficiency power supplies with Active PFC.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR

EQUIPMENT

1.Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and

peripheral equipment does not exceed 900VA.

2

2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does

not exceed the UPS unit's rated capacity (900VA/540W for CP900EPFCLCD). If the rated unit

capacities are exceeded, an overload condition may occur and cause the UPS unit to shut down or

the circuit breaker to trip.

BASIC OPERATION

3

DESCRIPTION

1. Power Switch

Used as the master on/off switch

for equipment connected to the

battery power supplied outlets.

2. Power On Indicator

This LED is illuminated when the

utility power is normal and the UPS

outlets are providing power, free of

surges and spikes.

3. LCD Module Display

High resolution and intelligent LCD

display shows all the UPS

information with icons and

messages. For more information

please check the “Definitions for

Illuminated LCD Indicators”

section.

4. Display Switch

The switch can be used to select the LCD display contents including Input Voltage, Output Voltage

and Estimated Run Time. The toggle frequency is set to one time per 0.5 second. Press the switch

to roll down the function menu. Pressing the switch for 2 seconds will turn the LCD display on or off

while in AC/Utility power mode.

 

5. Silence Alarm Switch

The toggle frequency is set to one time per 0.5 second. Press the switch to roll up the function

menu. Holding the switch for more than 2 seconds will silence the buzzer.

6. Control Switch

Press the Control switch for 3 seconds in AC/Utility Power Mode to perform a Self Test of the

battery.

7. Battery and Surge Protected Outlets

The unit has three battery powered/surge suppression outlets for connected equipment to ensure

temporary uninterrupted operation of your equipment during a power failure. (DO NOT plug a laser

printer, paper shredder, copier, space heater, vacuum, sump pump or other large electrical

devices into the “Battery and Surge Protected Outlets”. The power demands of these

devices may overload and damage the unit.)

8. Full-Time Surge Protection Outlets

The unit has three always on surge suppression outlets.

9. Circuit Breaker

Produktspezifikationen

Marke:	CyberPower
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	CP900EPFCLCD
Display-Typ:	LCD
Breite:	100 mm
Tiefe:	230 mm
Gewicht:	6600 g
Produktfarbe:	Schwarz
Höhe:	275 mm
Energieschutzeigenschaften:	Over power, Over voltage, Overload, Short circuit
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Warentarifnummer (HS):	85078000
Reaktionszeit:	4 ms
LED-Anzeigen:	Leistung
Geeignet für den Einsatz in Land/Ort:	Europa
Schnittstelle:	USB
Formfaktor:	Kompakt
Kompatible Betriebssysteme:	Windows 7/Vista/XP/2000/Server 2003, Linux
Ausgangsleistung:	540 W
Eingangsfrequenz:	50/60 Hz
Temperatur Betriebsumgebung:	32 - 104 °F
Anzahl der AC-Ausgänge:	6 AC-Ausgänge
Ausgangskapazität:	0.9 kVA
Modem (RJ-11) Port:	1
Druckanstiegsschutz:	Ja
Nominale Eingang Spannung:	165-265 V
Nominale Ausgang Spannung:	230 V
Überspannungsschutz-Funktionen:	Fax, Modem