CRUX BTS-TY1 Bedienungsanleitung

CRUX Radio BTS-TY1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr CRUX BTS-TY1 (2 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂŒr 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
- Adds Bluetooth Music streaming to the OEM Toyota radios.
- USB music playback with track up, track down and folder controls from the radio panel or steering
wheel controls.
- Adds 3.5mm auxiliary audio input.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
TOYOTA
4 Runner
1998-2002
Avalon
1998-2002
Camry
1998-2004
Camry Solara
1999-2003
Celica
1998-2002
Corolla
1998-2004
Highlander
2001-2003
Land Cruiser
1998-2001
MR2
1998-2004
Rav4
1998-2011
Sequoia
2000-2002
Sienna
1998-2002
Tacoma
1998-2004
Tundra
2000-2002
1. Radio must have a 12-pin (5 + 7) CD changer port.
2. The BTS-TY1 replaces the CD changer if present.
3. NOT compatible with ‘AD’ Series radios. (ex. AD6806)
Rev.110916
1/2
Navigations Apps
iPod, USB flash drive
and 3.5mm cable not
included.
1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 12-pin (5 + 7) CD changer port. If there is a connector plugged into this cavity, you
need to unplug it. The BTS-TY1 replaces the CD changer.
3. Plug the 12-pin connector of the BTS-TY1 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-TY1
module and run towards the desired location.
5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the
BTS-TY1 module and run to the desired location.
6. You can also mount the BTS-TY1 to an easily accessible location such as the center console or
glove box, to use the 3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
For Bluetooth function:
1. Turn on the radio and press the CD button. Screen will show “CD1 01”.
2. Go to the Bluetooth menu on your phone and connect to “Crux BT”.
3. BTS-TY1 will announce when the phone has been connected.
4. Play the music on your phone and audio should be heard on the factory sound system.
For USB Mode:
1. Plug in your USB flash drive to the BTS-TY1 USB port.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-TY1 will announce “USB Mode”.
4. USB Audio should be heard on the factory sound system. You can use either the radio control
panel or steering wheel controls as follows:
TRACK UP & DOWN = change music track Up or Down
DISC UP & DOWN = change music folder
For Line-In Mode:
1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-TY1 USB line-in jack.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-TY1 will announce “Line-In Mode”.
4. Plug the other end of the cable to the audio player and press play. Audio should be heard on the
factory sound system.
Magnetic Phone Mount Assembly:
1. Pop-in magnetic head to base socket.
2. Tighten locking nut and adjust to desired tilt.
3. Slide into the AC vent grille.
4. Use the desired metal plate size and stick
on the back of the phone or insert behind
the phone case.
Rev.110916
2/2


Produktspezifikationen

Marke: CRUX
Kategorie: Radio
Modell: BTS-TY1

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX BTS-TY1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio CRUX

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂŒr -Kategorien-