CRUX BTS-HN2 Bedienungsanleitung

CRUX Radio BTS-HN2

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CRUX BTS-HN2 (2 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
- Adds Bluetooth Music streaming to the OEM Acura/Honda radio.
- USB music playback with track up, track down and folder controls from the radio panel or steering
wheel controls.
- Adds 3.5mm auxiliary audio input jack.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
Acura
Honda
MDX
2005-2006
Accord
2003-2012
RSX
2004-2006
Civic
2006-2012
TL
2004-2009
CR-V
2005-2012
TSX
2004-2009
Crosstour
2010-2012
Element
2003-2011
Fit
2007-2012
Insight
2010-2012
Odyssey
2005-2010
Pilot
2004-2011
Ridgeline
2006-2012
S2000
2004-2009
1. Not compatible on Acura vehicles equipped with AcuraLink.
2. Radio must have a 14-pin CD changer port.
3. Not compatible with vehicles with DVD Navigation or factory rear view
camera.
Rev.081116
1/2
iPod, USB flash drive
and 3.5mm cable not
included.
1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 14-pin CD changer port. If there is a connector plugged into this cavity, you need to
unplug it.
3. Plug the WHITE 14-pin connector of the BTS-HN2 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2
module and run towards the desired location.
5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the
BTS-HN2 module and run to the desired location.
6. You can also mount the BTS-HN2 to an accessible location such as the center console or glove
box, to use the 3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
For Bluetooth function:
1. Turn on the radio and press the CD button. Screen will show “CD1 01”.
2. Go to the Bluetooth menu on your phone and connect to “Crux BT”.
3. BTS-HN2 will announce when the phone has been connected.
4. Play the music on your phone or other audio player and audio should be heard on the factory
sound system.
For USB Mode:
1. Plug in your USB flash drive to the BTS-HN2 USB port.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-HN2 will announce “USB Mode”.
4. USB Audio should be heard on the factory sound system. Use the radio knobs or steering wheel
controls to track up and track down.
For Line-In Mode:
1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2 USB line-in jack.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-HN2 will announce “Line-In Mode”.
4. Plug the other end of the 3.5MM cable to the audio player and press play. Audio should be heard
on the factory sound system.
Magnetic Phone Mount Assembly and Use:
1. Pop-in magnetic head to base socket.
2. Tighten locking nut to desired tilt.
3. Slide into the AC vent grille.
4. Use the desired metal plate size and stick
on the back of the phone or insert behind
the phone case.
Rev.081116
2/2


Produktspezifikationen

Marke: CRUX
Kategorie: Radio
Modell: BTS-HN2

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX BTS-HN2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio CRUX

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂĽr -Kategorien-