CRUX BTS-MZ1 Bedienungsanleitung

CRUX Radio BTS-MZ1

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr CRUX BTS-MZ1 (2 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂĽr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
- Adds Bluetooth Music streaming to select OEM Mazda radio.
- USB music playback with track up, track down and folder controls from the radio panel or steering
wheel controls.
- Adds 3.5mm auxiliary audio input jack.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
Mazda
Mazda 3
2004-2005
Miata
2002-2005
MPV
2002-2005
Protege
2001-2003
Protege 5
2001-2003
RX8
2004-2005*
*Must have radio version 9.55 - To determine radio version, press and hold the "text"
button then press and hold the "preset 1" button until the version number appears
on the display.
1. Radio must have a 16-pin CD changer port.
2. Not compatible with vehicles with DVD Navigation
or factory rear view camera.
Rev.081116
1/2
iPod, USB flash drive
and 3.5mm cable not
included.
Navigations Apps
1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 16-pin CD changer port. If there is a connector plugged into this cavity, you need to
unplug it.
3. Plug the WHITE 16-pin connector of the BTS-MZ1 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-MZ1
module and run towards the desired location.
5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the
BTS-MZ1 module and run to the desired location.
6. You can also mount the BTS-MZ1 to an accessible location such as the center console or glove
box, to use the 3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
For Bluetooth function:
1. Turn on the radio and press the CD button. Screen will show “CD1 01”.
2. Go to the Bluetooth menu on your phone and connect to “Crux BT”.
3. BTS-MZ1 will announce when the phone has been connected.
4. Play the music on your phone or other audio player and audio should be heard on the factory
sound system.
For USB Mode:
1. Plug in your USB flash drive to the BTS-MZ1 USB port.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-MZ1 will announce “USB Mode”.
4. USB Audio should be heard on the factory sound system. Use the radio knobs or steering wheel
controls to track up and track down.
For Line-In Mode:
1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-MZ1 USB line-in jack.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-MZ1 will announce “Line-In Mode”.
4. Plug the other end of the 3.5MM cable to the audio player and press play. Audio should be heard
on the factory sound system.
Magnetic Phone Mount Assembly:
1. Pop-in magnetic head to base socket.
2. Tighten locking nut and adjust to desired tilt.
3. Slide into the AC vent grille.
4. Use the desired metal plate size and stick
on the back of the phone or insert behind
the phone case.
Rev.081116


Produktspezifikationen

Marke: CRUX
Kategorie: Radio
Modell: BTS-MZ1

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX BTS-MZ1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio CRUX

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂĽr -Kategorien-