Conair GlideLite GI500 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Conair GlideLite GI500 (2 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
13. Do not place the soleplate directly on any
surface or on the appliance power cord
while the iron is hot or plugged in.
14. The plug must be removed from the
electrical outlet before the water reservoir is
filled with water.
15. Do not operate steam function without
properly filling the water tank with water.
16. The iron should always be turned off
before plugging in or unplugging from
an outlet. Never yank cord to disconnect
from outlet; instead, grasp plug and pull to
disconnect.
17. Burns could occur from touching hot metal
parts, hot water, or steam. Use caution
when turning a steam iron upside down to
empty water, as there may be hot water in
the reservoir.
18. If you need to clean the iron, unplug and
allow to cool. Use a slightly damp cloth and
wipe down the outside of the iron. DO NOT
use cleaning agents or place the iron in
water or cleaning fluids.
19. Do not hold hand in front of steam.
20. To reduce likelihood of circuit overload,
do not operate another high-wattage
appliance on the same circuit.
21. Never steam or iron clothes that are
being worn.
22. When emitting steam, this appliance may
cause burns if it is used too close to the
skin or eyes or if it is used incorrectly.
To reduce the risk of contact with hot
water emitting from the steam vents, test
appliance before use by holding it away
from the body.
IMPORTANT SAFETY
INSTRUCTIONS
When using your iron, especially when children
are present, basic precautions should always be
taken, including the following:
READ ALL
INSTRUCTIONS
BEFORE USING
DANGER – Any appliance is electrically
live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after use and before cleaning.
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other
liquids.
4. Do not reach for an appliance that has fallen
into water. Unplug immediately.
5. Use only in a dry area.
WARNING – To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. Children should be supervised to ensure
that they do not play with the appliance.
2. This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
3. The iron must not be left unattended while it
is connected to an electrical outlet.
4. Use this appliance only for its intended use
as described in this manual. Do not use
attachments not recommended by Conair.
5. The iron must be used and rested on a
stable surface.
6. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
7. Do not allow cord to touch heated surfaces.
Do not pull or twist cord. Let appliance cool
completely before emptying or putting away.
Wrap the cord loosely around the iron when
storing.
8. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
9. Never drop or insert any object into any
opening.
10. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
11. We recommend you do not use an
extension cord to operate this appliance. If
an extension cord is absolutely necessary,
a 15 ampere-rated cord should be used.
Cords rated for less amperage may
overheat. Care should be taken to arrange
the cord so that it cannot be pulled or
tripped over.
12. Surfaces of this appliance are hot when in
use. Do not let heated surfaces touch eyes
or skin.
23. When placing the iron on its base, ensure
that the surface on which the base is
placed is stable.
24. The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
25. Always disconnect the iron from the
electrical outlet before filling the reservoir
with water, emptying the water from the
reservoir, and when the iron is not in use.
26. Close supervision is required for any
appliance used by or near children. Do not
leave the iron unattended while the iron is
connected or on an ironing board.
SAVE THESE
INSTRUCTIONS
IMPORTANT
FOR HOUSEHOLD USE ONLY
DO NOT let children use the appliance.
DO NOT let untrained persons use the
appliance without supervision.
NEVER immerse the iron, cable or plug in any
liquids.
DO NOT leave the hot iron touching fabrics or
inflammable surfaces.
DO NOT leave the appliance unnecessarily
plugged in. Disconnect the plug from the outlet
when the appliance is not being used.
NEVER touch the appliance with wet or damp
hands.
DO NOT use the power cord or the appliance in
order to pull the plug out of the outlet.
DO NOT leave the appliance exposed to the
weather (rain, sun, etc.).
DO NOT leave the iron without supervision when
it is connected to the power supply.
DO NOT fill the reservoir with water before
removing the plug from the outlet.
PLEASE NOTE!
Do not use chemical additives, scented
substances or decalcifiers in the reservoir.
Failure to comply with the above-mentioned
regulations will lead to the loss of warranty.
OPERATING
INSTRUCTIONS
PREPARING FOR FIRST USE
Before first use, remove all labels from the
soleplate and housing. Plug iron in. Turn the
iron on, allow to heat up, then turn the iron off.
Unplug iron.
When using the iron for the first time, you may
notice a slight emission of smoke and hear some
sounds made by the expanding plastics. This
is quite normal and will stop after a short time.
We also recommend passing the iron over an
ordinary cloth before using it for the first time.
This GlideLite Iron features advanced One-Temp
technology. No settings are needed. The iron is
safe and effective on all fabric types.
FILLING THE RESERVOIR
1. The reservoir can be filled with ordinary tap
water. But distilled or demineralized water
is preferred.
a. Open the water reservoir door.
b. Using a clean measuring cup, slowly fill
the reservoir until the water reaches the
max fill indicator. DO NOT OVERFILL.
c. Close water reservoir door.
d. Wipe off any water that may have spilled
on the outside of the iron with a soft clean
cloth.
2. Set the iron on a stable, flat surface. We
recommend using a quality ironing board
as the pressing surface. Be sure to give
yourself enough room to maneuver the
iron when pressing.
FEDERAL COMMUNICATIONS
COMMISSION NOTICE
WARNING: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
SUPPLIER’S DECLARATION
OF CONFORMITY
Brand: Conair®
Model No.: GI500
Description: Steam Iron
Responsible Party: Conair LLC,
1 Cummings Point Road, Stamford, CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI
C63.4-2014
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
DATE OF ISSUE: 10/18/2022
ANTI-DRIP SYSTEM
With the Anti-Drip System, you can perfectly
iron even the most delicate fabrics. It prevents
water from dripping out of the soleplate when
the temperature is too low.
DRY IRONING
To iron without steam, do not press the
One-Touch Steam button.
SPRAY FUNCTION
Make sure that there is water in the reservoir.
(See Filling the Reservoir.) Press the Water
Spray button slowly for a dense spray or
quickly for a vaporized spray.
WARNING: For delicate fabrics, we recommend
moistening the fabric beforehand using the
spray function or putting a damp cloth between
the iron and the fabric.
To avoid staining, do not use the spray on silk
or synthetic fabrics.
CLEANING
Please Note: Before cleaning the iron in any
way, make sure that the appliance plug is not
connected to the outlet.
Any deposits or starch residue left on the
soleplate can be removed using a damp cloth
or a nonabrasive liquid detergent after the iron
has cooled.
Avoid scratching the soleplate with steel wool
or metallic objects.
The plastic parts can be cleaned with a damp
cloth, then wiped with a dry cloth.
SELF CLEANING
The self-cleaning feature cleans inside the
soleplate, removing impurities. We recommend
using this function every 10–15 days.
LIMITED ONE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 12 months from the date
of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed
on back, together with your purchase receipt.
California residents need only provide proof of
purchase and should call 1-800-3-CONAIR for
shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
12 months from the date of manufacture.
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or
limitation of special, incidental, or consequential
damages, so the above limitation may not apply
to you.
This warranty gives you specific legal rights, and
you may also have other rights, which vary from
state to state.
23PA086205 IB-17891
Service Center
Conair LLC
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair® product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com
Please register this product at
register.conair.com
©2023 Conair LLC
Glendale, AZ 85307
Made in China
Instruction Booklet
For your safety and continued enjoyment
of this product, always read the instruction
book carefully before using.
All GI500 Models
Spray Nozzle
Easy-to-fill
water
reservoir
Power
indicator
Power
button
Flexible
cord
Base
Water
Spray
button
Stainless
steel soleplate
Turbo
Steam
button
Self-Clean
button
3. Plug in the iron. Make sure that no other high-
wattage appliances are plugged into the same
circuit.
4. Press the Power button. A blue light will
blink for 30 seconds while heating. The iron
is ready to use when blue light turns solid.
5. There are no temperature or fabric type
settings to select. One-Temp technology
safely removes wrinkles with one setting
thanks to powerful steam.
6. If steam is desired, press the One-Touch
Steam button. For stubborn wrinkles,
press the Turbo Steam button to get a
turbocharged amount of steam. The iron
will only release steam when it’s in the
horizontal position.
7. After use, turn iron off, unplug, and let it cool
for 10 minutes before putting it away.
3-WAY AUTO OFF
As a safety feature, your iron will turn off
automatically if left in the upright position and
not moved for 8 minutes. It will also turn off
automatically if left in the horizontal or left or
right side positions and not moved for
30 seconds. In these instances, the blue
light will flash. Only when the iron is held
horizontally can steam be released. When the
unit is held vertically, the steam function will
shut off automatically and the white steam light
will flash.
Please Note:
DO NOT use chemical additives, scented
substances or decalcifiers in the water
reservoir. Failure to comply with this
regulation will lead to the loss of warranty.
GET TO KNOW YOUR GLIDELITE PROFESSIONAL SERIES
1700 WATT IRON (MODEL GI500)
SELF-CLEANING DIRECTIONS
• Fill the reservoir up to the maximum level
indicated and hold the iron horizontally over
the sink.
• Plug in the iron and press the Power button.
A blue light will blink for 30 seconds and then
turn solid. Make sure the Steam button is off
and remains off.
• Hold Self-Clean button for 3 seconds to enter
the self-clean mode.
• Blue light will flash for approximately 2
minutes while in self-cleaning mode.
• When blue light is constant, cleaning has
finished and the unit has entered normal
mode.
• Turn iron off, unplug from outlet. When
soleplate has cooled, you may clean it with
a damp cloth.
HOW TO STORE
• Disconnect the plug of the iron from
the outlet.
• Let the iron cool down completely.
• Empty the water reservoir by turning the
iron upside down over a sink and gently
shaking it.
• Always put the iron away in a vertical
position.
One-Touch
Steam
button
Produktspezifikationen
| Marke: | Conair |
| Kategorie: | Eisen |
| Modell: | GlideLite GI500 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Conair GlideLite GI500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Eisen Conair
1 Oktober 2024
6 September 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
Bedienungsanleitung Eisen
- Eisen Sinbo
- Eisen AFK
- Eisen Clatronic
- Eisen Domo
- Eisen Emerio
- Eisen G3 Ferrari
- Eisen Coline
- Eisen Tristar
- Eisen Sanyo
- Eisen Nedis
- Eisen Philips
- Eisen SilverCrest
- Eisen Sunbeam
- Eisen Panasonic
- Eisen Clas Ohlson
- Eisen Quigg
- Eisen Adler
- Eisen Beper
- Eisen Bestron
- Eisen Camry
- Eisen Princess
- Eisen Trisa
- Eisen Bosch
- Eisen AEG
- Eisen Aigostar
- Eisen Ambiano
- Eisen Siemens
- Eisen Concept
- Eisen Electrolux
- Eisen Fagor
- Eisen Gorenje
- Eisen Jata
- Eisen Klarstein
- Eisen Lervia
- Eisen Miele
- Eisen Severin
- Eisen Unold
- Eisen Bomann
- Eisen Essentiel B
- Eisen H.Koenig
- Eisen Korona
- Eisen Melissa
- Eisen OK
- Eisen Russell Hobbs
- Eisen Taurus
- Eisen Tefal
- Eisen Vox
- Eisen Day
- Eisen ECG
- Eisen König
- Eisen Mesko
- Eisen Telefunken
- Eisen Black And Decker
- Eisen Arzum
- Eisen BEKO
- Eisen Blaupunkt
- Eisen Brabantia
- Eisen Braun
- Eisen Eldom
- Eisen Eta
- Eisen Grundig
- Eisen Heinner
- Eisen Hotpoint
- Eisen Inventum
- Eisen Krups
- Eisen Moulinex
- Eisen Primo
- Eisen Solac
- Eisen Tomado
- Eisen Wilfa
- Eisen AEG-Electrolux
- Eisen Alpina
- Eisen Exquisit
- Eisen Haier
- Eisen Hoover
- Eisen Privileg
- Eisen Frigidaire
- Eisen Svan
- Eisen King
- Eisen Philco
- Eisen Hitachi
- Eisen Hyundai
- Eisen Orava
- Eisen Orion
- Eisen Tesla
- Eisen Livoo
- Eisen Polti
- Eisen Easy Home
- Eisen Elica
- Eisen ProfiCare
- Eisen Elta
- Eisen Beem
- Eisen Jura
- Eisen Kooper
- Eisen Lümme
- Eisen Morphy Richards
- Eisen Rowenta
- Eisen Sencor
- Eisen DeLonghi
- Eisen Turmix
- Eisen Singer
- Eisen Maxwell
- Eisen Ariete
- Eisen Kalorik
- Eisen Optimum
- Eisen Rotel
- Eisen Scarlett
- Eisen Ufesa
- Eisen Calor
- Eisen Cecotec
- Eisen Zephir
- Eisen Punktal
- Eisen Termozeta
- Eisen LELIT
- Eisen Laurastar
- Eisen Matsui
- Eisen Cleanmaxx
- Eisen Domena
- Eisen Shark
- Eisen Maxxmee
- Eisen Nova
- Eisen Elba
- Eisen MPM
- Eisen Thomas
- Eisen Imetec
- Eisen Logik
- Eisen Team
- Eisen Andis
- Eisen JML
- Eisen Watshome
- Eisen Proline
- Eisen Westinghouse
- Eisen Lagrange
- Eisen Maxim
- Eisen Johnson
- Eisen Waves
- Eisen Vivax
- Eisen OBH Nordica
- Eisen Profilo
- Eisen Zelmer
- Eisen Breville
- Eisen Innoliving
- Eisen Jocca
- Eisen Vitek
- Eisen Mellerware
- Eisen Proctor Silex
- Eisen Ursus Trotter
- Eisen Swan
- Eisen Drew & Cole
- Eisen Hamilton Beach
- Eisen Orbegozo
- Eisen Izzy
- Eisen Saturn
- Eisen Defy
- Eisen Duronic
- Eisen Elgento
- Eisen Farberware
- Eisen Jocel
- Eisen Kambrook
- Eisen Oster
- Eisen Steamfast
- Eisen Sunny
- Eisen Grunkel
- Eisen Tower
- Eisen Vanguard
- Eisen Vaporella
- Eisen Kunft
- Eisen Becken
- Eisen Nevir
- Eisen Girmi
- Eisen Lenoxx
- Eisen Flama
- Eisen Malmbergs
- Eisen Di4
- Eisen Khind
- Eisen Koblenz
- Eisen LERAN
- Eisen Currys Essentials
- Eisen Gallet
- Eisen Lafe
- Eisen Inno-Hit
- Eisen DPM
- Eisen Robinhood
- Eisen Create
- Eisen Brentwood
- Eisen BEP
- Eisen Britania
- Eisen CHI
- Eisen Michelini
- Eisen Imarflex
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024