Cobra ACXT1035R FLT Bedienungsanleitung

Cobra Nicht kategorisiert ACXT1035R FLT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cobra ACXT1035R FLT (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

1. Antenna

2. External Speaker/

Microphone/ USB Charge Jack

3. ButtonMode/Power

4. ButtonCall/Lock

5. Buttons Channel Up/Down

6. Backlit LCD Display

7. Speaker/Microphone

8. ButtonsVolume Up/Down

9. ButtonLED Light

10. Talk Button

11. Button Memory/Escape

12. ButtonTri-Watch

13. ButtonScan

14. Rewind-Say-Again® Button

15. Wrist Strap Connection

16. Belt Clip

17. Battery Compartment

18. Battery Door Screws (2)

19. Rubberized Grips

20. FlashlightLED

21. ButtonWeather

10 6

20 19

Lock Function

The Lock Channel Up, Channel function locks the

Down, Volume Up, Volume Down Mode/Power and

buttons to prevent accidental operation.

To turn the lock on or off:

– Press and hold the button for Call/Lock

two seconds.

A double beep sound is used to conrm your lock on

or off Lockrequest. When in mode,

the Lock icon will be displayed.

microTALK® Range

Your range will vary depending on terrain and conditions.

In at, open country your radio will

operate at maximum range.

Buildings and foliage in the path of the

signal can reduce the range of the radio.

Dense foliage and hilly terrain will further

reduce the range of the radio.

On Channels 8 through 14, your radio

automatically switches to low power, which

will limit the range the radio can communicate.

Staying in touch with your family and friends is convenient

and easy when using your microTALK® radio. Some of the

many uses you will discover include:

Communicating with others while hiking, biking, and working; keeping track

of family and friends at a crowded public event; checking with travel

companions in another car; talking with neighbors; arranging meeting spots

with others while shopping at the mall.

Secure your microTALK® radio while on

the go.

Carrying your microTALK® radio with you is easy when

using the belt clip or optional wrist strap.

The belt clip easily attaches to your belt, purse, or

backpack.

Owner’s Manual

Introduction

M ing Li d ferak fe Easier an Sa

Introduction

Product Features

Operation

Using Your Radio

Customer Assistance

Product Service & Support

Printe Chid in na

P No. KEM-ML38202-19A art

English

TWO-WAY R O L ADI MODE

ACXT1035R FLT CAMO

Nothing Comes Close a brato Co ®

For any questions about operating this new Cobra branded product, PLEASE

contact information for support will vary depending on the country in which

you purchased and utilize the product.

To obtain warranty service or other information for products purchased from

Altis itself or through its authorized reseller or agent and utilized in the

U.S.A., please call our consumer support line at , or email (866) 721-3805

us at . You will receive instructions on how to ship support@altistec.com

the products at your expense to an Altis Global Limited Authorized Service

Center. To obtain service, you must include: (a) a copy of your receipt, bill of

sale or other comparable proof of purchase; (b) a written description of the

problem; and, most importantly; (c) your address and telephone number.

For warranty and customer service information outside the US, please

contact your local dealer.

For further information needed on its features, please visit

www.cobrawalkietalkie.com for frequently

asked questions and the electronic manual.

A-1 A-2 A-3 1 23

Caring for Your microTALK® Radio

Your microTALK® radio will give you years of trouble-free service

if cared for properly. Handle the radio gently. Keep the radio away from dust.

Avoid exposure to extreme temperatures.

Installing Batteries

To install or replace batteries:

1. Remove belt clip by releasing belt clip latch and

sliding clip up.

2. Loosen the two top and bottom screws on the

back of the radio to remove the battery

compartment cover. the screws should be HINT:

loose enough (and sticking up) that you could use

them to help pull off the battery door if needed.

3. Insert the supplied three AA rechargeable

batteries or non-rechargeable alkaline batteries.

Position batteries according to polarity markings.

4. Replace battery compartment cover, screw down

the screws and re-attach the belt clip.

5. Tighten the screws using the tip of the belt clip to

secure the battery door to the radio. Do not

overtighten. Only use the tip of the belt clip to

tighten the screws.

• Do not attempt to charge alkaline batteries.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or

rechargeable (Ni-Cd, Ni-MH, etc.) batteries.

To charge batteries in radio:

1. Check to see that the batteries are inserted properly.

2. Insert the cable into the charge jack located at the

top of the radio.

3. Plug the charging cable into a power source.

• Use only the supplied rechargeable batteries and charger for recharging

your Cobra microTALK® radio.

• Cobra recommends your radio is turned off while being charged.

• It normally takes about 15 hours to fully charge batteries.

• Non-rechargeable alkaline batteries can also be used in your radio.

4 5 6 7 8 9 10

Two nches cm I (5 )

fr M hom out

Battery Low

When battery power is low, the nal bar in the

Battery Low icon will blink and an audible tone will

sound twice before the radio shuts off. Your batteries

should be replaced if using alkaline batteries or

recharged if using rechargeable batteries.

Auto Battery Save

If there are no transmissions within 10 seconds, the

radio will automatically switch to mode Battery Save

and the icon will ash in the display. Power Saver

This will not affect the radio’s ability to receive

incoming transmissions.

Communicating with Another Person

Press and hold the button.1. Talk

With the microphone about two inches (5 cm) from 2.

your mouth, speak in a normal voice.

Release the button when you are 3. Talk

nished talking and listen for a response.

You cannot receive incoming calls while

pressing the button.Talk

To Select a Channel

With the radio , select any of the 22 channels by on

pressing the or button.Channel Up Channel Down

Both radios must be tuned to the

same channel to communicate.

The radio’s LCD display will show a blinking

charging status indicator while charging.

Both radios must be tuned to the

same channel to communicate.

Channel 8 through 14 only operates on

Low power setting.

See for frequency allocations charts.page 19

Listening for a Response

Release the button to receive incoming Talk

transmissions. Your microTALK

® radio is always

in Standby Talk Call mode while the or buttons

are not pressed.

To Adjust Volume

Press the or Volume Up Volume

Down button.

A double beep sound is used to indicate

the minimum and maximum volume levels

(1 through 8).

Call Button

Press the button. Call

The other person will hear a three second call

tone. This tone is used only to establish voice

communications.

LED/S.O.S. Flashlight

Press the button below the LED ashlight TALK

button to use the LED ashlight located at the

bottom of the radio.

To activate S.O.S. function, press and hold the

LED ashlight button to turn on. Press and release to turn off the

ashlight or S.O.S. function.

Auto Squelch/Maximum Range

Your microTALK® radio will automatically shut weak transmissions off

and unwanted noise due to terrain, conditions or if you’ve reached

your limit.Maximum Range

See page 10 on how to select between

ten call tone settings.

Set CTCSS Privacy Codes

Set DCS Privacy Codes

Set Hi-Mid-Low Power

Set Vox On/Off

Set Vox Sensitivity

Set Call Tones 1-10

Set VibrAlert On/Off

Set Roger Beep On/Off

Set Key Tones On/Off

Set Rewind-Say-Again On/Off

To successfully communicate using a privacy code, both

the sending and receiving radios must be tuned to the same

channel and to the same privacy code system (CTCSS or DCS)

and privacy code number. Each channel will remember the

last privacy code system and number you select.

The privacy code 00 is not a privacy code, but allows all

signals to be heard on a channel that is set to 00 on both

the CTCSS and DCS systems.

Atlanta, GA USA.

www.cobrawalkietalkie.com

Mode Functions (continued on back side)

Back itl LCD Display

Features

• 22 Channels

• 10 Channel

Weather Radio

• Weather Alert

• 121 Privacy Codes

(38 CTCSS codes/

83 DCS codes)

• Hands-Free

Operation (VOX)

• VibrAlert®

Silent Paging

• Rewind-Say-Again®

• Tri-Watch

• Scan

Channels,

privacy codes

• Backlit LCD Display

• LED Flashlight

• Call Alert

Ten selectable tones

• Button Lock

• Speaker/

Microphone/

Charge Jack

• Roger Beep

Selectable On/Off

• Battery/Power Saver

• Keystroke Tones

• Battery Level

Indicator

• Low Battery

Audible Alert

• Auto Squelch

• Belt Clip

1. Battery Level Indicator

2. Roger Beep Icon

3. VOX Icon

4. Weather Icon

5. Lock Icon

6. Hi/Med/Low Power Icon

7. DCS/CTCSS Icons

8. Scan/Memory Icon

9. Weather Alert Icon

10. DCS/CTCSS Privacy Code Numbers

11. Power Saver Icon

12. Channel Numbers

13. Receive/Transmit Icon

14. Memory Channel Number

15. VibrAlert® / Call Alert Icon

16. Key Tone Icon

17. BURP Icon

18. Rewind-Say-Again®

Icon

19. Signal Strength Meter

Turning on Your microTALK® Radio

Press and hold the button until you hear Mode/Power

a series of audible tones indicating the radio is .on

Your microTALK® radio is now in mode, Standby

ready to receive transmissions. The radio is always in

mode except when the or Standby Talk, Call

buttons are pressed.Mode/Power

Quick Start

1. Mode/Power on Press and hold the button to turn your radio.

2. Channel Up Channel Down Press the or button to select

a channel.

3. Talk Press and hold the button while

speaking into the microphone.

4. Talk When nished talking, release the

button and listen for a response.

Both radios must be tuned to the same

channel/privacy code to communicate.

For charging microTALK radio(s) in desktop charger:

1. Insert radio(s) into desktop charger as shown.

2. Insert the micro-USB cable into jack on back of charger.

Note: Charger should be installed near the equipment

and easily accessible.

3. Plug the charging cable into a power source. For

pluggable equipment, the socket-outlet shall be

installed near the equipment and shall be easily

accessible.

If charging light is not , check position of radio. Radio should be upright. on

The charge indicator light will stay until the charging is complete.on

Battery Save Mode

Operation

Mode Functions

Set CTCSS Privacy Codes

To select a CTCSS privacy code:

After selecting a channel, press 1.

the Mode/Power CTCSS button until the icon

appears and the small numbers next to the

channel number ash on the display.

2. Channel Up Channel Down Press using the or button to select a

privacy code. You can hold the or button for fast advance.Up Down

3. When your desired CTCSS privacy code is displayed, press the

Mode/Power button to enter the new setting and proceed to other

functions, or press the button to return to mode.Talk Standby

If DCS is turned on at the channel

selected, the display will ash the

CTCSS icon and “OFF.” To switch from

DCS to CTCSS, press the Channel Up

or button while the displayChannel Down

is ashing “OFF.” The display will then

show the small numbers ashing and you

will then be able to proceed to step 2.

Set DCS Privacy Codes

To select a DCS privacy code:

After selecting a channel, press the 1. Mode/Power

button until the DCS icon appears and the small

numbers ash on the display (00 through 83).

2. Channel Up Channel Down Press using the or button to select a DCS

privacy code. You can hold the or button for fast advance.Up Down

3. Mode/Power When DCS privacy code is displayed, press the button

to enter the new setting and proceed to other functions, or press the

button to return to mode.Talk Standby

If CTCSS is turned at the channel selected, on

the display will ash the DCS icon and “OFF.”

To switch from CTCSS to DCS, press the

Channel Up Channel Down or button while

the display is ashing “OFF.” The display will

then show the small numbers ashing and

you will then be able to proceed to step 2.

Belt Clip

12 18

Remove Belt Clip

Insert Batteries

Radi harger aco C J k

Tip of Belt Clip

This radio oats with included NiMH batteries.

It may not oat with some other AA batteries.

Battery Low

Vox

D LO WX

Talk Button

TW DCS

CTCSS M

Channel Number

Listening

Volume Level

LE /SD .O.S. Flashlight

Lock Icon CTCSS Mem

RP P S

Privacy Code CTCSS Mem

DCS Privacy Code

Set High/Medium/Low (H-M-L) Power Button

Your radio can transmit selectively at 0.5, 1, or 2 watts of power. Use the

low power setting for short-range communications and use the high

power setting for long-range communications.

To toggle between H-M-L Power Modes:

Press the button until 1. Mode/Power HI MED LO

icon appears.

Press using the or 2. Channel Up Channel Down

button to select between High/Medium/Low power.

When the desired power is selected, press the3.

Mode/Power button to proceed to other functions,

or press the button to return to mode.Talk Standby

Voice Activated Transmit (VOX)

In VOX mode, your microTALK® radio can be used “hands-free,” automatically

transmitting when you speak. You can set the sensitivity level to t theVOX

volume of your voice and avoid transmissions triggered by background noise.

To turn VOX mode on or off:

Press the button until the 1. Mode/Power VOX

icon ashes on the display. The current or On Off

setting is displayed.

Press the or 2. Channel Up Channel Down

button to turn VOX or On Off.

When VOX is turned on or off, press the3.

Mode/Power button to enter the new setting

and proceed to other functions, or press the Talk

button to return to mode.Standby

To set VOX sensitivity:

1. Mode/Power VOX Press the button until the icon

ashes and the current sensitivity level is displayed.

2. Channel Up Channel Down Press the or

button to change the setting.

3. When VOX sensitivity is selected, press the

Mode/Power button to enter the new setting

and proceed to other functions, or press the Talk

button to return to mode.Standby

The current VOX sensitivity level is

displayed with letters “L” and a Number 1

through 5, with Number 5 being the most

sensitive level and Number 1 being the

least sensitive level.

Vox

VOX Icon

VOX Sens itivity lLeve

Scrolling Through the Mode Function

By scrolling through the function, you will be able to select or turn Mode on

preferred features of your microTALK

® radio. When scrolling through the

Mode function, your radio features will be displayed in the same

predetermined order:

Privacy Codes

Your microTALK® radio incorporates two advanced coded squelch systems

that can help to reduce interference from other users on any given channel.

CTCSS (Continuous Tone Coded Squelch System) provides 38 privacy codes

and DCS (Digitally Coded Squelch) provides 83 privacy codes. This provides

a total of 121 . Either system can be used on all channels, but Privacy Codes

both systems cannot be used on the same channel at the same time.

Call Tone Setting

Call Tone On/

Vibrate On

Call Tone On/

Vibrate Off

Ten Call Tone Settings

You can choose between ten different to transmitCall Tone Settings

a call alert.

To change a call tone setting:

Press the button several times until 1. Mode/Power

the letter “C” and the current call tone number (01

through 10) is displayed. The current call tone will

sound for three seconds.

Press the or button to 2. Channel Up Channel Down

hear the other call tone settings.

Choose one of the following:3.

Press the button to enter the new a. Mode/Power

setting and proceed to other functions.

b. Press or button to return to Talk Call/Lock

Standby mode.

c. Do not press any buttons for 12 seconds to

return to mode.Standby

VibrAlert® and Call Alert

Your MicroTALK® radio can alert you to incoming signals by sounding an

audible call tone or an audible tone with VibrAlert

®.

To change call settings:

Press the button several times until the 1. Mode Call

Setting icon ashes on the display. The current

setting (“01” vibrate + ring, “02” ring only) is

displayed.

Press the or button to 2. Channel Up Channel Down

change the call setting.

Choose one of the following:3.

a. Press the button to enter the new setting Mode

and proceed to other functions.

b. Talk Call/Lock Press or button to return to

Standby mode.

c. Do not press any buttons for 12 seconds to

return to mode.Standby

Warranty & Trademark Acknowledgment Notes

Operation

General Specications

12 13 14 15 16 17

18 19 20 21 22 23 24

The radio ignores specic privacy

codes while scanning channels.

Freq y A ouenc ll cation

A = Channel No. for 22 Channel Models

B = Frequency in MHz

C = Power Output

A B C

1 462.5625 High

2 462.5875 High

3 462.6125 High

4 462.6375 High

5 462.6625 High

6 462.6875 High

7 462.7125 High

8 467.5625 Low

9 467.5875 Low

10 467.6125 Low

11 467.6375 Low

12 467.6625 Low

13 467.6875 Low

14 467.7125 Low

15 462.5500 High

16 462.5750 High

17 462.6000 High

18 462.6250 High

19 462.6500 High

20 462.6750 High

21 462.7000 High

22 462.7250 High

IMPORTANT NOTICE: FCC LICENSE REQUIRED

WARNING: Changes or modications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1)

This device may not cause harmful interference, and 2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

MODEL ACXT1035R FLT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: 1) This device may not cause harmful interference, and 2) this device must accept any

interference received,including interference that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts of a unique

nature, with parts other than those recommended by Cobra may cause a violation of the technical

regulations of part 95 of the FCC rules, or violation of type acceptance requirements of part 2 of the

rules.

Limited One-Year Warranty

Altis Global Limited warrants to the original consumer purchaser only that this product and

the component parts thereof, will be free from defects in workmanship and materials for a

period of one year from the date of rst consumer purchase. During this period, Altis will,

repair or replace, at its sole option and discretion, this product or any defective parts. Altis’

liability hereunder shall be limited to repair or replacement of the defective part or parts,

and such correction shall constitute a fullment of all of Altis’ warranties hereunder.

This limited warranty is only valid for the original consumer purchaser in limited jurisdictions

and is not transferrable. This limited warranty will automatically terminate prior to

expiration if this product is sold or otherwise transferred to another party. The product must

be purchased from Altis or an authorized dealer or the warranty is void. This limited

warranty is valid only for products purchased and utilized in specic jurisdictions. Please

visit our website at for a list of jurisdictions wherein this www.cobrawalkietalkie.com

limited warranty is valid.

This limited warranty does not cover damage due to misuse, abuse, negligence, acts of

God, accident, commercial use or modication of, or to any part of this product. This

warranty does not cover damage due to improper operation, maintenance or installation;

ordinary wear and tear; or attempted alterations or repairs by anyone other than Altis or

someone authorized by Altis to do warranty work. Any unauthorized alterations or repairs

will void this warranty. This limited warranty does not cover product sold AS IS or WITH ALL

FAULTS. This limited warranty is invalid if the factory applied serial number or date stamp

has been altered, defaced or removed from this product. This limited warranty does not

cover product purchased or utilized in a jurisdiction not covered.

The procedure for obtaining service and support, and the applicability of this warranty, will

vary depending on the country or jurisdiction in which you purchase and utilize the product.

For details on obtaining product service, support and other warranty information please visit

www.cobrawalkietalkie.com.

This warranty gives you specic legal rights, and you may also have other rights which vary

from state to state and country to country.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, ALTIS MAKES NO OTHER

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALTIS EXPRESSLY

DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED

WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS

EXPRESSED WARRANTY.

LIMITATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED

UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ALTIS SHALL

NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT

LIMITED TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY

EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. ALTIS IS NOT LIABLE FOR ANY

DAMAGES CAUSED BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, INCLUDING ANY

LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES.

10 Memory Location

Your microTALK® radio has for storing your most 10 Memory Locations

frequently used channels and channel/privacy code combinations.

These can be selected individually or can be scanned. Memory Locations

To program a memory location:

1. MEM/ESC Memory Press the button. icon and

the Memory Location show on the display.

2. Channel Up Channel Down Press the or button

to select the memory location (0 through 9).

3. MEM/ESC Press the button to enter a new

memory location or edit an already programmed

memory location.

4. Channel Up Channel Down Press the or button

to select the memory location.

5. Press the button. The channel MEM/ESC

numbers will ash on the display.

6. Channel Up Channel Down Press the or button

to select a channel (1 through 22).

7. MEM/ESC CTCSS Press the button. The icon and

privacy code numbers will ash on the display.

8. Choose one of the following:

a. Channel Up Channel Down Press the or

button to select a CTCSS privacy code (00

through 38) for the channel.

b. MEM/ESC Press the button to switch from

CTCSS to DCS. The DCS icon and privacy code

numbers will ash on the display. The Channel

Up or button can then be used Channel Down

to select a DCS privacy code (00 through 83)

for the channel.

9. Choose one of the following:

Press the button to enter the channel/privacy code in the a. MEM/ESC

selected memory location. Radio then proceeds to next memory

location, which will blink.

Press and hold the button to save the current state of the b. MEM/ESC

Set Memory Function and press the button again return MEM/ESC

to Standby mode.

To recall a stored memory channel location:

1. MEM/ESC Memory Press the button until the icon

and the memory location number ash on the

display.

2. Channel Up Channel Down Press the or button to

select a memory location (0 through 9).

3. MEM/ESC Press and hold the button to return to

Standby mode on the selected memory location.

If a location has been programmed before,

its associated channel/privacy code will be

shown on the display.

If “ ” ashes in place of the privacy code numbers, a privacyoF

code is already set in the opposite (CTCSS or DCS) system.

Press the or button to cancel theChannel Up Channel Down

opposite code and select a privacy code from the active

system for the selected channel.

If a location has been programmed before,

its associated channel/privacy code will

be shown on the display.

A memory location can be reprogrammed

at any time it is displayed. Press the

MEM/ESC button to begin.

Operation

Mode Functions (continued)

Rewind-Say-Again®

Rewind On/Off

If is enabled, the last 20 seconds of incoming audio is recorded Rewind

and you can play back calls by pressing the button.Rewind

To set the Rewind mode ON or OFF:

Press the button until the 1. Mode/Power Rewind

icon appears.

Press Channel Up/Down button to select or .2. ON OFF

Press button to save entry.3. Push-to-talk (PTT)

Use the Cobra exclusive Rewind-Say-Again®

feature to replay or record the last 20 seconds of an

incoming audio transmission.

Example 1:

When music or conversation creates too much noise to

hear an inbound message clearly, press the REWIND

button to hear the message a second time.

Example 2:

When listening to an urgent message with confusing

background noise, press the button to hear REWIND

the message a second time. To erase the recorded

audio, hold down the button while turning on REWIND

the radio. 2 conrmation beeps will be heard indicating

that the recorded audio has been erased.

Weather (WX) Alert Mode

Turning On the Weather Alert function will allow your radio to

automatically receive NOAA weather signals and warnings from

designated weather broadcast stations. If the radio is turned , it will ON

alert to Weather and other emergency alerts broadcast by NOAA.

To turn Weather Alert On or Off:

Press the button to enter the 1. Weather All

Hazards (Weather) radio mode.

Press the button again and the Weather 2. Weather

Alert icon ashes on the display. The current On

or setting is displayed.Off

Press the and button 3. Channel Up Channel Down

to turn Weather Alert or .On Off

Press the button again to save the new 4. Weather

setting.

This feature is set to by default.OFF

Make sure the strongest Weather

channel is selected for your area

using the NOAA All Hazards Radio

Channels selection in the

previous menu.

Hold the button to lock the recordingRewind

memory (the icon ashing) and saveRewind

the currently recorded transmission.

Tri-Watch Set-up

Your microTALK® radio can be set up to scan three of your favorite

channels for activity.

To Program or Edit the Tri-Watch Channels:

Press and hold the button from 1. TRI-WATCH GMRS

Standby mode for two (2) seconds to activate

Tri-Watch Setup TW mode. The icon on the

display will turn .ON

Press or button to 2. Channel Up Channel Down

select the desired channel.Tri-Watch

Press and release button to conrm 3. TRI-WATCH

entry.

Repeat steps 2 and 3 to program the remaining 4.

additional Tri-Watch memory channel.

After programming both memory 5. Tri-Watch

channels the radio will immediately engage

Tri-Watch mode.

Using Tri-Watch:

From mode, press the 1. GMRS Standby TRI-WATCH

button. The will appear in the display along with TW

the three channels stored in the memory.Tri-Watch

The radio will scan through the three (3) 2. Tri-Watch

memory channels.

. A signal on any one (1) of the three (3) channels 3

will stop the scan for 6 seconds to allow you to

listen to the trafc on that location.

Press or button to 4. Channel Up Channel Down

resume scanning the channels or to Tri-Watch

change the scan direction.

To EXIT the scan, press the 5. Tri-Watch TRI-WATCH

button again, and the radio will return to GMRS

Standby mode.

The main channel number will ash to

indicate channel position.

After the scan stops to monitorTri-Watch

a channel, as long as you do not press any

buttons within 6 seconds, your radio will

automatically resume scanning the

Tri-Watch channels

CTCSS Mem

Memory Channel

CTCSS Mem

Memory Channel

HI WX

CTC

BURP P

Scan Channels

BURP Po

BURP Icon

BURP

BURP features allows the user to expel water from inside the speaker

grille. This is useful if the radio is dropped in the water which may

become trapped in the speaker grille and mufe the audio.

To activate BURP:

Press the and buttons at the 1. MEM/ESC Rewind

same time.

The Burp tone(s) at maximum level will sound 2.

from the internal speaker for 8 seconds. During

this time, will appear in the display.BURP

Hold the radio with the speaker grille down to help 3.

the water drain out.

After an 8-second interval, the radio will return to 4.

standby.

Channel Scan

Your microTALK® radio can automatically scan channels.

To scan channels:

Press and release the button until the 1. Scan Scan

icon and the channel numbers appear

on the display.

Press and hold the button to begin scanning 2. Scan

channels.

The Scan icon will continue to be displayed when

scan is . Your radio will continue to scan all on

channels and stop if an incoming transmission is

detected. Your radio will remain on that channel for

6 seconds.

During scanning (while receiving an incoming transmission),

you can choose from the following:

Press and hold the button to communicate on that channel. a. Talk

Your radio will remain on that channel and return to mode. Standby

Press the or button to resume b. Channel Up Channel Down

scanning channels.

Press and hold the button to return to . c. Scan Standby

Roger Beep Conrmation Tone

Your listener will hear an audible tone when you release the button. Talk

This alerts the other party that you have nished talking and it is OK for

them to speak.

To turn roger beep on or off:

Press the button several times until 1. Mode/Power

the icon ashes. The current or Roger Beep on

off setting is displayed.

Press the or button to 2. Channel Up Channel Down

select roger beep or .on off

Choose one of the following:3.

Press the button to enter the new a. Mode/Power

setting and proceed to other functions.

Press or button to return to b. Talk Call/Lock

Standby mode.

Do not press any buttons for 12 seconds to c.

enter the new setting and return to Standby

mode.

Key Tone On/Off

When is , an audible tone will sound each time a button is Key Tone On

pressed.

To turn key tone on or off:

Current key tone status On/Off will ash.1.

Press the or button to 2. Channel Up Channel Down

select key tone on or off.

Choose one of the following:3.

Press the button to enter the a. Mode/Power

Standby mode.

Press or button to return to b. Talk Call/Lock

Standby mode.

Do not press any buttons for 12 seconds to c.

enter the new setting and return to Standby

mode.

TW DC

CTCSS

Select Channel

Scan Privacy de Co s

Privacy Code Scan

Your microTALK

® radio can automatically scan the (either Privacy Codes

CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only

one set of privacy codes (CTCSS or DCS) can be scanned at a time.

To scan privacy codes:

While in , press the button 1. Standby mode Scan

twice (CTCSS) or three times (DCS) until the

CTCSS or DCS icon and numbers are ashing.

Press and hold the button to begin scanning 2. Scan

privacy codes within the selected channel.

The Scan icon will continue to be displayed when

privacy code scan is . Your radio will continue to on

scan privacy codes and stop as an incoming

transmission is detected. Your radio will remain on

that channel/privacy code for 6 seconds.

NOAA* All Hazards Radio Channels

You can use your microTALK® radio to listen to NOAA All Hazards Radio

channels transmitting in your area.

To listen to All Hazards Radio channels:

Press the button until the 1. Weather All Hazards

Radio icon and the currently selected All Hazards

Radio channel are displayed.

Use the or 2. Channel Up Channel Down

button to change channels.All Hazards Radio

The icon will continue to 3. All Hazards Radio

be displayed when is . All Hazards Radio on

To exit , press the 4. All Hazards Radio

TALK button.

*National Oceanographic and Atmospheric Administration

Hazards Radio Icon

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Safety Information For microTALK

® Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the Talk button is pushed,

it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed

50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with

safety levels for handheld wireless devices.

Important:

FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF

exposure guidelines when used with Cobra accessories supplied or designated for this product. Use of other

accessories may no ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna.

Unauthorized antennas, modications, or attachments could damage the transmitter and may violate FCC

regulations.

Normal Position:

Hold the transmitter approximately two (2) inches from your face and speak in a normal voice, with the

antenna pointed up and away.

FCC Part 15.21 Warning Statement-

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

IC RSS-GEN

This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Under ISEDC regulations, this radio transmitter may only operate using an antenna of a type and maximum (or

lesser) gain approved for the transmitter by ISEDC. To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not

more than that necessary for successful communication.

The applicant is responsible for providing proper instructions to the user of the radio device, and any usage

restrictions, including limits of exposure durations. The user manual shall provide installation and operation

instructions, as well as any special usage conditions, to ensure compliance with SAR and/or RF eld strength

limits. For instance, compliance distance shall be clearly stated in the user manual.

Radiation Exposure Statement:

Any Changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

For Remote controller, SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC

with the device transmitting at its highest certied power level in all tested frequency bands, although the SAR

is determined at the highest certied power level, the actual SAR level of the device while operating can be

well below the maximum value.

Before a new model device is available for sale to the public, it must be tested and certied to the FCC that it

does not exceed the exposure limit established by the FCC/ISEDC, Tests for each device are performed in

positions and locations (e.g. at the ear and worn on the body) as required by the FCC/ISEDC.

For body worn operation, this model device has been tested and meets the FCC/ISEDC RF exposure guidelines

when used with an accessory designated for this product or when used with an accessory that Contains no

metal and that positions the handset a minimum of 10 mm from the body.

Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

ALTIS IS NOT LIABLE FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A

THIRD PARTY. THIS LIMITATION APPLIES WHETHER DAMAGES ARE SOUGHT, OR A CLAIM

MADE, UNDER THIS WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE OR STRICT

PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITATION

CANNOT BE WAIVED OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILITY WILL

BE EFFECTIVE EVEN IF ALTIS OR AN AUTHORIZED REPRESENTATIVE OF ALTIS HAS BEEN

ADVISED BY YOU OF THE POSSIBILITY OF ANY SUCH DAMAGES.

Some states and countries do not allow limitations on how long an implied warranty lasts

and do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights, and you

may also have other rights which vary from state to state and country to country.

Provided that the product was purchased from Altis itself or through its authorized reseller or

agent and utilized in the U.S.A., Altis will, without charge, repair or replace, at its option,

defective products, products or component parts upon delivery to the authorized Altis Global

Limited Authorized Service Center, accompanied by proof of the date of rst customer

purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service,

but the return charges, to an address in the U.S.A, will be at Altis’ expense, if the product is

under warranty.

For Products Purchased Outside the U.S.A.

Please contact your authorized local reseller or agent for warranty information.

Trademark Acknowledgement

Manufactured, distributed, or sold by Altis Global Limited, ofcial licensee for this product.

Cobra

®, microTalk®, Nothing Comes Close to a Cobra®, and the snake design are registered

trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a

trademark of Cobra Electronics Corporation, USA. All other product or service names are the

property of their respective owners.

Produktspezifikationen

Marke:	Cobra
Kategorie:	Nicht kategorisiert
Modell:	ACXT1035R FLT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cobra ACXT1035R FLT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Cobra

Cobra JumPack XL H2O CPP 15000 Bedienungsanleitung

1 August 2024

Cobra HE150 Bedienungsanleitung

20 Juli 2024

Cobra ACXT1035R FLT Bedienungsanleitung

17 Juli 2024

Cobra RX680 Bedienungsanleitung

13 Juli 2024

Cobra Marine JumPack H2O Bedienungsanleitung

13 Juli 2024

Cobra Battery Charger 2A Bedienungsanleitung

5 Juli 2024

Cobra JumPack Mini CPP 8500 Bedienungsanleitung

25 Mai 2024

Cobra RX100 Bedienungsanleitung

21 Juni 2023

Cobra FV-RV1 Bedienungsanleitung

3 Juni 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024