Clarion SRV202 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Clarion SRV202 (4 Seiten) in der Kategorie Autofreisprechanlage. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Printed in Malaysia / / Gedruckt in Malaysia / Imprimé à Malaisie Stampato in Malaysia / Impreso en Malasia 2001/6 (D.O) SE-301A
Installation/Wire Connection Guide
Guide d’installatio/câblage
Installation-/Anschluß-Anleitung
Installazione/Guida al Collegamento dei fili
Guia de instalación/Conexión
1Tapping screw(dia.5 16) ............................................ 12
2Speed nut ...................................................................... 4
3Mounting bracket........................................................... 4
4Power supply lead ......................................................... 1
5Speaker input lead ........................................................ 1
ACCESSORIES/ACCESSOIRES ACCESSORI/ZUBEHÖR/ /ACCESORIOS
1.
NAMES AND FUNCTIONS OF PARTS/NOMENCLATURE ET FONCTION DES PIÈCES/BEZEICHNUNGEN UND FUNKTIONEN DER TEILE/NOME E FUNZIONE DELLE PARTI/NOMBRES Y FUNCIONES DE LAS PARTES
2.
1. Before mounting or making connections, do not fail to
disconnect the cable from the side of the battery. Dov
not reconnect the cable until all steps have been
completed.
2. Avoid the vicinity of objects that produce heat (especially
heating ducts) and select a location that is well venti-
lated and where the unit is not likely to be splashed with
water.
3. When making connections, avoid running the harness
near parts that can become hot. Also, keep cables with
connectors away from the vehicle's wiring and secure
them well in order to avoid the introduction of noise from
the vehicle.
NOTES ON MOUNTING AND MAKING CONNECTIONS/REMARQUES SUR L’INSTALLATION ET LES RACCORDEMENTS NOTE SUL MONTAGGIO E I COLLEGAMENTI/HINWEISE FÜR ANBRINGUNG UND ANSCHLÜSSE/ /NOTAS SOBRE EL MONTAJE Y LAS CONEXIONES
3.
SRV202
20 cm AIR COMPRESSION ACTIVE SUBWOOFER
SUBWOOFER ACTIF À COMPRESSION D’AIR DE 20 cm
20 cm LUFTVERDICHTUNGSAKTIVER SUBWOOFER
SUBWOOFER ATTIVO A COMPRESSIONE ARIA DA 20 cm
ALTAVOZ DE SUBGRAVES ACTIVO CON COMPRESIÓN DE AIRE DE 20 cm
EspañolItalianoDeutschFrançaisEnglish
1Vis autotaraudeuse (dia. 5 16) ................................ 12
2Écrou-tôle...................................................................... 4
3Pattes de fixation .......................................................... 4
4Cordon d’alimentation ................................................... 1
5Cordon d’entrée d’enceinte ........................................... 1
1Blechschrauben (Durchmesser 5 16)...................... 12
2Geschwindigkeitsmutter ................................................ 4
3Halterungen .................................................................. 4
4Netzleitung .................................................................... 1
5Lautsprechereingangleitung.......................................... 1
1Vite autofilettante (dia. 5 16) ................................... 12
2Dado rapido .................................................................. 4
3Staffe di montaggio ....................................................... 4
4Cavo di alimentazione ................................................... 1
5Cavo di ingresso diffusore ............................................. 1
1Tornillo roscachapa (5 16 de diámetro) ................... 12
2Tuerca rápida ................................................................ 4
3Soportes de montaje..................................................... 4
4Cable de alimentación .................................................. 1
5Cable de entrada de altavoz ......................................... 1
1. Avant de commencer l’installation ou les raccordements,
débranchez impérativement le câble du côté de lav
batterie. Ne le rebranchez pas avant d’avoir terminé
toutes les opérations.
2. Évitez la proximité des sources de chaleur (et en
particulier celle des conduits de chaleur). Choisissez un
emplacement bien aéré et où le haut-parleur ne risque
pas d’être éclaboussé par l’eau.
3. Lors des raccordements, veillez à ce que le faisceau de
fils ne passe pas près de pièces qui peuvent devenir
chaudes. Gardez les câbles munis de connecteurs à
l’écart du câblage du véhicule et fixez-les bien afin
d’éviter les parasites depuis le véhicule.
1. Vor Anbringung oder Anschließungen unbedingt zuerst
das Kabel von der -Seite der Batterie abtrennen. Dasv
Kabel erst wieder anschließen,wenn alle Arbeitsschritte
ausgeführt worden sind.
2. Anbringung in Nähe von Teilen (besonders Heizkanäle)
vermeiden, die Wärme erzeugen, sowie einen gut
belüfteten Ort wählen, an dem das Gerät ebenfalls nicht
Wasser ausgesetzt ist.
3. Beim Ausführen von Anschlüssen, den Kabelsatz nicht
in Nähe von Teilen verlegen, die sich erwärmen können.
Ebenfalls Kabel und Stecker nicht in der Nähe der
Fahrzeugverdrahtung anbringen und diese gut sichern,
um Störungsrauschen vom Fahrzeug zu vermeiden.
1. Prima di montare o collegare, non dimenticare di
scollegare il cavo dal lato della batteria. Nonv
ricollegare il cavo finché non si sono completate tutte le
operazioni.
2. Evitare la vicinanza di oggetti che producono calore
(particolarmente condotti di riscaldamento) e seleziona-
re un punto ben ventilato e dove l’unità non possa subire
schizzi d’acqua.
3. Quando si collega, evitare di far passare il cablaggio
vicino a parti che possono diventare calde. Inoltre tenere
i cavi con connettori lontani dai cavi del veicolo e fissarli
bene per evitare l’introduzione di disturbi dal veicolo.
1. Antes de montar el aparato o hacer ningún tipo de
conexiones, no se olvide de desconectar el cable
negativo de la batería. No conecte de nuevo el cablev
hasta haber completado todos los pasos.
2. Evite la proximidad de aparatos que produzcan calor
(especialmente las salidas de aire caliente de las
calefacciones) y seleccione un lugar que esté bien
ventilado, y en el que no haya peligro de que el aparato
pueda ser salpicado con agua.
3. Cuando haga las conexiones, evite tender el mazo de
cables cerca de partes que puedan calentarse. Además,
mantenga alejados del cableado del vehículo los cables
con conectores y sujételos bien para evitar la captación
de ruido eléctrico procedente del vehículo.
PHASE
NORMAL
REVERSE
FREQGAIN
(Hz)(dB)
20cm Dual voice coil woofer 405g strontium magnet
120W High-power amplifier with Low-pass-filter
20cm AIR COMPRESSION ACTIVE SUB WOOFER
INPUT-A
Speaker input
Entrée de haut-parleur
Lautsprechereingang
Ingresso diffusore
Entrada de altavoz
INPUT-B
RCA input
Entrée RCA
RCA-Eingang
Ingresso RCA
Entrada de RCA
PHASE
Phase switch
Commutateur de phase
Phasenschalter
Interruttore di fase
Interruptor de fase
GAIN
Gain control
Commande de gain
Verstärkungsregler
Comando di guadagno
Control de ganancia
LOW PASS FILTER
Variable low-pass filter
Filtre passe-bas variable
Variabler Tiefpaßfilter
Filtro passabasso variabile
Filtro pasabajos variable
POWER
Power indicator
Témoin d'alimentation
Netzanzeige
Indicatore di alimentazione
Indicador de alimentación
POWER
Power supply coupler input
Entrée de coupleur d'alimentation
Netzkopplungeingang
Ingresso accoppiatore alimentazione
Entrada del acoplador de alimentación
GAIN
Adjust this control to obtain the desired volume. (It can normally be left
in the center position.)
PHASE
Use this switch to set the phase to match that of the front and rear
speakers.
LOW PASS FILTER
This makes it possible to eliminate high- frequency noise.
GAIN
Réglez cette commande pour obtenir le volume désiré (vous pouvez
normalement la laisser sur la position centrale).
PHASE
Utilisez ce commutateur pour régler la phase de manière qu’elle
corresponde à celle des haut-parleurs avant et arrière.
LOW PASS FILTER
Ceci permet de supprimer les bruits aigus.
GAIN (VERSTÄRKUNG)
Diesen Regler für die gewünschte Lautstärke einstellen. (Er kann
normalerweise in der Mittenposition gelassen werden.)
PHASE (PHASE)
Diesen Schalter für Phaseneinstellung verwenden,für Anpassung für
die vorderen und hinteren Lautsprecher.
LOW PASS FILTER (TIEFPASSFILTER)
Für Eliminierung von Hochfrequenzstörungen.
GAIN
Regolare questo comando per ottenere il volume desiderato. (Può
normalmente essere lasciato sulla posizione centrale.)
PHASE
Usare questo interruttore per impostare la fase in corrispondenza ai
diffusori anteriori e posteriori.
LOW PASS FILTER
Rende possibile eliminare i disturbi ad alta frequenza.
GAIN
Regule este control para obtener el volumen deseado. (Normalmente
podrá dejarse en la posición central.)
PHASE
Emplee este conmutador para regular la fase de forma que coincida
con la de los altavoces delanteros y traseros.
LOW PASS FILTER
Esto permite eliminar el ruido de alta frecuencia.
Input-A (speaker input) wiring method /Méthode de câblage d’entrée-A (entrée de haut-parleur) /
Kabelverbindung für Eingang A (Lautsprechereingang) /Metodo di collegamento Input-A (ingresso diffusore) /
Método para conectar la entrada A (entrada de altavoz)
WIRE CONNECTIONS/CARACTÉRISTIQUES/KABELVERBINGUNGEN/COLLEGAMENTO DEI FILI/CONEXIONES
4.
MOUNTING METHOD/MÉTHODE D’INSTALLATION/ANBRINGVERFAHREN/METODO DI MONTAGGIO/MÉTODO DE MONTAJE5.
Maximum Output: 120W (60W+60W)
Rated Output Power: 60W (30W+30W)
Frequency Response: 20Hz~200Hz
Harmonic Distortion: 0.05%
S/N Ratio: 80dB (JIS•A)
Low-Pass Filter Cut-off Frequency:
55Hz~130Hz (-12dB/oct)
Power Source Voltage: 14.4V
Ground: Negative
Power Consumption: 7.0A
Auto-fuse capacity: 10A 1
External dimensions: 10-1/4" (260mm) Width
10-1/4"(260mm)Height
18-5/16" (465mm) Depth
Weight: 10.4 kg (365.6 oz)
For improvement purposes, specifications and design are
subject to change without prior notice.
SPECIFICATIONS/CARACTÉRISTIQUES/SPEZIFIKATIONEN/DATI TECNICI/ESPECIFICACIONES6.
Clarion Co., Ltd.
EspañolItalianoDeutschFrançaisEnglish
1 Tapping screw
1 Vis autotaraudeuse
1 Blechschrauben
1 Vite autofilettante
1 Tornillo roscachapa
3 Mounting bracket
3 Pattes de fixation
3 Halterungen
3 Staffe di montaggio
3 Soportes de montaje
2 Speed nut
2 Écrou-tôle
2 Geschwindigkeitsmutter
2 Dado rapido
2 Tuerca rápida
Puissance de sortie maximum: 120W (60W+60W)
Puissance de sortie nominale: 60W (30W+30W)
Réponse en fréquence: 20Hz~200Hz
Distorsion harmonique: 0.05%
Rapport signal/bruit: 80dB (JIS•A)
Fréquence de coupure du
filtre passe-bas: 55Hz~130Hz
(-12dB/oct)
Tension d´alimentation: 14.4V
Masse: Négative
Consommation: 7.0A
Capacité d´auto-fusible: 10A 1
Dimensions extérieures: 260mm (largeur) 260 mm
(hauteur) 465 mm
(profondeur)
Poids: 10.4 kg
Les caractéristiques et la conception sont susceptibles
d´être modifiées sans préavis à des fins d´amélioration.
Maximale Ausgangsleistung: 120W (60W+60W)
Nennausgangsleitung: 60W (30W+30W)
Frequenzgang: 20Hz~200Hz
Klirrfaktor: 0,05%
Rauschabstand: 80dB (JISA)
Tiefpaßfilter-Grenzfrequenz: 55Hz~130Hz
(-12dB/okt)
Stromquellenspannung: 14,4V
Erdung: Negativ
Leistungsaufnahme: 7,0 A
Sicherungsautomat-Kapazität:
10A 1
Außenabmessungen: 260 mm Breite 260 mm
Höhe 465 mm Tiefe
Gewicht: 10,4 kg
Änderungen der technischen Daten und des Designs
bleiben zur Produktverbesserung ohne Ankündigung
vorbehalten.
Uscita massima: 120 W (60 W + 60 W)
Uscita di potenza nominale: 60 W (30 W + 30 W)
Risposta in frequenza: 20 Hz~200 Hz
Distorsione armonica: 0,05%
Rapporto segnale/rumore: 80 dB (JIS-A)
Frequenza di taglio del
filtro passabasso: 55 Hz~130 Hz
(-12 dB/ottava)
Tensione fonte di
alimentazione: 14,4 V
Massa: Negativa
Consumo di corrente: 7,0 A
Capacità fusibile automatico: 10 A 1
Dimensioni esterne: 260 mm larghezza 260 mm
altezza 465 mm profondi
Peso: 10,4 kg
A fini di miglioramento, i dati tecnici e il design sono
soggetti a modifiche senza preavviso.
Potencia máxima de salida: 120W (60W+60W)
Potencia nominal de salida: 60W (30W+30W)
Respuesta de frecuencia: 20Hz~200Hz
Distorsión armónica: 0.05%
Relación señal/ruido: 80dB (JIS•A)
Frecuencia de corte del
filtro pasabajos variable: 55Hz~130Hz
(-12dB/oct)
Voltaje de la fuente de
alimentación: 14.4V
Masa: Negativo
Consumo eléctrico: 7.0A
Capacidad auto-fusible: 10A 1
Dimensiones externas: 260 260 465 mm (an al✕ ✕
pro)
Peso: 10.4 kg
Por motivos de mejora, las especificaciones y el diseño
están sujetos a cambios sin previo aviso.
Input-B (RCA input) wiring method /Méthode de câblage d’entrée-B (entrée RCA) /
Kabelverbindung für Eingang B (RCA-eingang) / Metodo di collegamento Input-B (ingresso RCA) /
Método para conectar la entrada B (entrada de RCA)
Main power supply (yellow)
Alimentation principale (jaune)
Hauptstromversorgung (gelb)
Alimentazione principale (giallo)
Alimentación principal (amarillo)
Center unit
Unité centrale
Zentrale Einheit
Unità centrale
Unidad central
Amplifier control (blue/white)
Commande d’amplificateur (bleu/blanc)
Verstärkersteuerung (blau/weiß)
Controllo amplificatore (blu/bianco)
Control del amplificador (azul/blanco)
White
Blanc
Weiß
Bianco
Blanco
White/black
Blanco/negro
Weiß/schwarz
Bianco/nero
Blanco/negro
Gray
Gris
Grau
Grigio
Gris
Gray/black
Gris/noir
Grau/schwarz
Grigio/nero
Gris/negro
Left speaker
Haut-parleur gauche
Linker Lautsprecher
Diffusore sinistro
Altavoz izquierdo
Fuse (10 A)
Fusible (10 A)
Sicherung (10 A)
Fusibile (10 A)
Fusible (10 A)
Right speaker
Haut-parleur droit
Rechter Lautsprecher
Diffusore destro
Altavoz derecho
Ground (black) Connect to metal portion of vehicle chassis.
Masse (noir) Connectez ce fil à une partie métallique du
châssis du véhicule.
Erdung (schwarz) An ein Metallteil des Fahrzeugchassis
anschließen.
Massa (nero) Collegare alla parte metallica del telaio del
veicolo.
Masa (negro) Conéctelo a la parte metálica del chasis del
vehículo.
RCA pin cord (sold separately)
Cordon à fiches RCA (vendu séparément)
RCA nadel schnur (getrennt erhältlich)
La corda di spillo di RCA (in vendita a parte)
Cable de clavija RCA (vendido por separado)
Main power supply (yellow)
Alimentation principale (jaune)
Hauptstromversorgung (gelb)
Alimentazione principale (giallo)
Alimentación principal (amarillo)
Center unit
Unité centrale
Zentrale Einheit
Unità centrale
Unidad central
Amplifier control (blue/white)
Commande d’amplificateur (bleu/blanc)
Verstärkersteuerung (blau/weiß)
Controllo amplificatore (blu/bianco)
Control del amplificador (azul/blanco)
Fuse (10 A)
Fusible (10 A)
Sicherung (10 A)
Fusibile (10 A)
Fusible (10 A)
Ground (black) Connect to metal portion of vehicle chassis.
Masse (noir) Connectez ce fil à une partie métallique du châssis du véhicule.
Erdung (schwarz) An ein Metallteil des Fahrzeugchassis anschließen.
Massa (nero) Collegare alla parte metallica del telaio del veicolo.
Masa (negro) Conéctelo a la parte metálica del chasis del vehículo.
1) Mount the supplied brackets on the unit.
2) Make cuts in the carpet and insert speed nuts.
3) Secure the brackets to carpet with the tapping screws.
1) Montez les pattes de fixation fournies sur le haut-parleur.
2) Fendez la moquette et insérez les écrous-tôle.
3) Fixez les pattes de fixation à la moquette avec les vis taraudeuses.
1) Die mitgelieferten Halterungen am Gerät anbringen.
2) Im Bodenbelag Löcher schneiden und die Geschwindigkeitsmutter
einführen.
3) Die Halterungen mit den Blechschrauben auf dem Bodenbelag
befestigen.
1) Montare le staffe in dotazione sull’unità.
2) Eseguire tagli nel tappetino e inserire i dadi rapidi.
3) Fissare le staffe al tappeto con le viti autofilettanti.
1) Monte en la unidad los soportes suministrados
2) Haga cortes en la alfombrilla e inserte las tuercas rápidas.
3) Fije los soportes a la alfombrilla con los tornillos autorroscantes.

Produktspezifikationen

Marke: Clarion
Kategorie: Autofreisprechanlage
Modell: SRV202

Brauchst du Hilfe?

Wenn Sie Hilfe mit Clarion SRV202 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten