Citronic U-PAD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Citronic U-PAD (7 Seiten) in der Kategorie Mischpult. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
U-PAD
Compact Mixer with USB Interface
Item ref: 170.879 UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
170.879UK User Manual
Introduction
Thank you for choosing a Citronic U-PAD mixer as part of your recording setup or stage sound system.
This product has been developed to provide a wide range of facilities for professional and reliable sound
reinforcement. Please read and keep this manual to achieve the best results from your purchase and avoid
damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If liquids
enter the housing, stop using immediately, allow the unit to dry out and have checked by qualified it
personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Use 5Vdc power from a host computer or USB power supply with 1A or more output.
• Avoid ingress of water or particles into any part of the housing. If liquids are spilled on
the console, stop using immediately, allow the unit to dry out and have checked by
qualified personnel before further use
Placement
• Keep the console out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the control surface
• Allow adequate space for airflow and keep the console away from damp or dust .
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required.
• A soft brush can be used to clear debris from between controls without damaging them
• Do not use solvents for cleaning the unit.
170.879UK User Manual
Console layout
The U-PAD mixing console has mono input channels which can accept a balanced microphone input or 2
switchable line/instrument input. There is also a stereo input for playback devices or line level
instruments.
All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal
chain. Console layout is set out in distinct sections to simplify operati on.
The following pages of this manual are divided up into these stages to explain the details and function of
each control.
Channel inputs
Channel 1 and 2 inputs are provided as XLR or 6.3mm jack on combo sockets.
If an XLR is plugged in, this will be con cted as low impedance (microphone) level. If a 6.3mm plug is ne
used, this will be connected as either line or instrument level (switchable)
The connections for these inputs are assigned as follows.
Mic / Line / Instrument Input
1. Combo input Connect a balanced microphone via XLR connection or a line level or
instrument input via 6.3mm plug. An unbalanced XLR can be connected provided
that +48V phantom power is not used. Wired as follows.
2. IMPED switch Press this button in to set the input impedance to instrument level or leave the button
in the up position for a line level input. (instrument level is usually for pickups, such
as those on a guitar. Electronic keyboards usually produce a line level output)
3. +48V phantom Press this button in to enable +48V phantom power to the XLR and the LED indicator
will light. This provides power to some condenser microphones and DI boxes.
Do not use with unbalanced XLR connectors. This does not affect any jack inputs.
Stereo Input
4. L/MONO Line level 6.3mm jack input.
Mono if connected alone or left side if right side input is connected.
5. RIGHT Line level 6.3mm jack input r right side of stereo input. fo
Balanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Signal –
Unbalanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Ground


Produktspezifikationen

Marke: Citronic
Kategorie: Mischpult
Modell: U-PAD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Citronic U-PAD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischpult Citronic

Bedienungsanleitung Mischpult

Neueste Bedienungsanleitung für -Kategorien-