Citronic LS26 Bedienungsanleitung

Citronic DJ Ausrüstung LS26

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Citronic LS26 (3 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Line Splitter

LS26 953.022

User Manual

Features:

 Switchable 2 x 6 or 1 x 12 outputs

 Independent volume control per output

 Dual input signal clip indicators

 19” rack-mount case 1U

www.citronic.com

Introduction:

Thank you for choosing this Citronic line splitter. e LS26 provides a reliable and comprehensive solution for line signal Th

distribution. In order to achieve the best results from this equipment and avoid damage through misuse, please read and follow

these instructions and retain for future reference.

Warning:

To prevent the risk of ﬁre or electric shock, do not expose any part of the unit to rain or moisture.

If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have checked by qualiﬁed personnel before

further use.

Avoid impact, extreme pressure or heavy vibration to the unit.

There are no user serviceable parts inside the line splitter refer all servicing to qualiﬁed service personnel. –

Safety

 Check that the supplied mains lead is in good condition and the supply voltage is correct.

 Ensure signal leads are of good condition and connected to appropriate inputs/outputs

 Do not allow any foreign particles to enter the unit through control or connector apertures

Placement

 Keep out of direct sunlight and away from heat sources.

 Keep away from damp or dusty environments.

 When rack-mounting, avoid placing heavy units above the unit and ensure all connectors and controls are accessible

Cleaning

 Use a soft cloth with a neutral detergent to clean the casing as required

 Use a soft brush to clear debris from the control surface

 Do not use strong solvents for cleaning the unit.

Front Panel

Rear Panel

6. CHANNEL A outputs 1 6 (6.3mm jack) –

7. INPUT A (6.3mm jack)

8. MONO / STEREO mode switch

9. INPUT B (6.3mm jack)

10. CHANNEL B outputs 7 12 (6.3mm jack) –

11. IEC mains inlet & fuse

12. Voltage selector

1. 12) CHANNEL B volume controls (7 –

2. SIGNAL B input clip indicator

3. MONO / STEREO mode indicators

4. SIGNAL A input clip indicator

5. 6) CHANNEL B volume controls (1 –

Applications

The LS26 is a signal distribution tool which can be used to split either 2 mono signals into 6 copies of each or a single mono signal into 12 – –

copies of the original. These are boosted back up to line level and each given a volume control.

Applications for this function include …

 Zone level control for a venue with many rooms fed from the same stereo sound source (12 rooms for mono or 6 for stereo)

 Multi-ampliﬁer signal distribution where ampliﬁers have no signal-through facility

 Speech distribution to headphone ampliﬁers for interpreters/transcribers in conference situations

 Multi-level parallel processing in a studio scenario where several copies of the original are sent to various signal processors –

Connection

All connections are via unbalanced 6.3mm mono jack and operate at line level. Use good quality screened jack leads to connect the input signal

to INPUT A and INPUT B (use only INPUT A if splitting a single mono signal to 12 outputs) .

Connect each output to the respective ampliﬁer (or processor) input, again using good quality screened jack leads.

With ampliﬁers turned down, connect mains (ensuring correct supply voltage is selected) using the supplier IEC mains lead.

Operation

Keep ampliﬁer volume levels turned down.

Select the required mode STEREO into 6 pairs of outputs or MONO into 12 outputs on the MODE selector switch at the rear – –

Check input signal(s) for gain level by playing the sound source into the LS26.

If the CLIP indicators light up, reduce the output level of the signal source until the clipping is eliminated.

Bring the ampliﬁer levels back up to the maximum required level (usually full power) for the speaker(s) being driven

Control each OUTPUT via the level controls on the LS26 front panel accordingly.

After use, turn ampliﬁers down before switching oﬀ power to the LS26 to avoid loud noises through speakers.

SPECIFICATIONS

Power supply

115/230Vac 50/60Hz - selectable (IEC)

Inputs

A & B, (6.3mm jack)

Outputs

1 - 6 & 7 - 12 (6.3mm jack)

Input impedance

20kohm

Output impedance

220ohms

Frequency response

20Hz - 20kHz, +0/- 1dB

Signal to noise ratio

>95dB

THD

<0.008%

Dimensions

483 x 44 x 170mm

Weight

2.0kg

TROUBLESHOOTING

No function and Power switch LED is not lit

Ensure mains voltage is correct (check selector) and connected properly

Ensure mains outlet switch is on

Power is on but no audio output

Check all jack leads are OK and connected properly

Check that OUTPUT controls are not turned fully down

Check that inputs and outputs are connected the correct way around

Make sure input is connected to INPUT A in MONO mode

Check both inputs are present in STEREO mode

Distorted output

Reduce level of input source

Reduce OUTPUT level controls

Check that output is not fed to low impedance inputs in error

Output is very low level

Ensure input source is line level (0.775Vrms)

Increase OUTPUT level control(s)

Increase signal source level

Note: for further troubleshooting, refer equipment to qualiﬁed service personnel for testing

Produktspezifikationen

Marke:	Citronic
Kategorie:	DJ Ausrüstung
Modell:	LS26

Brauchst du Hilfe?

Wenn Sie Hilfe mit Citronic LS26 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung DJ Ausrüstung Citronic

Citronic MP-X10 Bedienungsanleitung

21 August 2024

Citronic LS26 Bedienungsanleitung

21 August 2024

Citronic DSM2-6 mkII Bedienungsanleitung

21 August 2024

Citronic PD-1S MK2 Bedienungsanleitung

19 August 2024

Citronic CD-1.2 Bedienungsanleitung

18 August 2024

Citronic CEQ231 Bedienungsanleitung

17 August 2024

Citronic CE22 Bedienungsanleitung

17 August 2024

Citronic CX23 Bedienungsanleitung

17 August 2024

Citronic USB2+1 Bedienungsanleitung

17 August 2024

Citronic CD-1 Bedienungsanleitung

17 August 2024

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-

Line 6 HX Effects Bedienungsanleitung

15 Oktober 2024

Korg DT-10 Bedienungsanleitung

8 Oktober 2024

Tascam XS-3 Bedienungsanleitung

2 Oktober 2024

Audio-Technica AT-VM95EN Bedienungsanleitung

29 September 2024

Behringer CMD DC-1 Bedienungsanleitung

28 September 2024

Korg OT-120 Bedienungsanleitung

27 September 2024

Korg DTR-2000 Bedienungsanleitung

26 September 2024

Festo CPX-E-CEC-M1 Bedienungsanleitung

24 September 2024

BeamZ StarFuzer Bedienungsanleitung

24 September 2024

Focusrite Clarett 4Pre USB Bedienungsanleitung

23 September 2024