Cioks DC7 Bedienungsanleitung

Cioks Nicht kategorisiert DC7

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cioks DC7 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Version 1.1 February 2019 Version 1.1 February 2019
Powering dierent pedal types
Each individual rig is dierent, therefore if you have questions about using the DC7 please e-mail your ,
detailed questions including the power requirements of your specic pedals directly to . support@cioks.com
Technical specications
AC mains input: -265VAC, 50-60Hz max. 58W 90 ,
Outputs 1-7: 9V DC / 0mA 66 or
12V DC / 500mA or
15V DC / 400mA or
18V DC / 330mA each
USB outlet: 5V DC / max. 1A
AUX outlet: 24V DC / max. 2A
Total output power: 48W
Size: 25,4 (excl. rubber feet) 160 8xx8 mm / 6.3x3.5x1.0”
Weight: 0,5kg / 1.1 lb
Warranty period: 5 years worldwide
What’s in the box?
• CIOKS DC7 power supply
• Mains power cord
• 12 Flex cables
• Mounting hardware (2 screws and a hex-key)
• Manual
• Product sheet (drill guide)
• Flex guide
User’s Manual
Version 1 1. – February 2019
Introduction
Since 1991, the Danish company CIOKS has been providing guitar and bass players with reliable power
supplies dedicated for eect pedals. After more than a quarter of a century, CIOKS s designed the next ha
Future Power Generation professional power supply dedicated powering up to seven high current to
pedals (as well as others with lower current draw ongside providing power for a smartphone or a tablet ) al
via the USB outlet and having a 24V DC auxiliary outlet. The result is CIOKS DC7.
Features
• Trim 1-inch prole (25,4mm), only 0,5kg (1.1 lb)
• 2-stage switch-mode power supply topology
• Ultra-low noise achieved by multi-stage ltering
• 7 isolated DC-outlets, 6W each (660mA at 9V on each outlet)
• 4 selectable voltages on each outlet (9, 12, 15 or 18V)
• Charge your phone or tablet with 5V USB outlet (max. 1A)
• Expand via 24V AUX outlet with CIOKS 8 or CIOKS 4 units for more isolated outlets
• Individual status LED on each outlet and global status LED
• Built-in true power meter showing the total load
• Total maximum output power 48W
• Use anywhere in the world, universal mains input voltage 90-265V AC
• Mounting hardware for Pedaltrain and Temple Audio boards included
• Compatible with CIOKS GRIP for drill-free Pedaltrain mounting
• 12 Flex cables included
• Designed in Denmark, assembled in Poland
• 5-year worldwide warranty
Version 1.1 February 2019 Version 1.1 February 2019
Overview
Left
On the left side you ll nd the AC mains input as a standard IEC C14 socket and outlets 1-3 for wi
powering pedals.
Right
On the right side you have outlets 4-7, the 5V USB outlet and the 24V AUX outlet.
Top
CIOKS logo has a red LED placed in the middle of the letter ‘O’ and this functions as a global status
indicator For each outlet you have a voltage selector switch and an advanced LED indicator. The three .
LEDs in the true power meter is also situated on the top of the enclosure. A legend in the middle shows the
voltage switch settings with corresponding output voltage values and the maximum current rating at the
selected voltage.
Front
The two holes in the front with metric M4 threads are to be used with the GRIP bracket (sold separately)
for mounting to Pedaltrain boards with no drilling required.
Bottom
The four detachable rubber feet are situated on the bottom of the enclosure. On this same surface you will
nd 3 holes with metric M4 threads, which should be used for mounting of the power supply to a
pedalboard.
Getting started
Connect the mains power cord to the power supply and AC mains. Set the output voltage for a given outlet
to either 9, 12, 15 or 18V depending on the needs of the particular pedal to be powered. Using the right
Flex cable type connect your pedal to th outlet. Repeat this with your remaining pedals. is
Advanced LED Monitoring feature
Each isolated outlet has its individual LED status indicator. The indicator is lit in normal operation. The
LED light gets dim when you operate just on the higher edge of the current mA limit for the voltage you
have chosen on the given outlet. If you overload or short circuit an outlet, the respective LED indicator
turns o. The light intensity of the status LED will be higher when the output voltage is set to higher a
value than 9V being 12, 15 or 18V.
True power meter
The three small 2mm LEDs on top of the DC7 form a true power meter showing the total load of the power
supply. When none of these three LEDs are lit the total load is below 40% of the total 48W. When the load
is above 40% you see the green LED turn on. At loads higher than 70% both the green and yellow LEDs
are lit. When you exceed the 90% of the total maximum load all three LEDs will be lit.
Global status indicator
If the DC7 operates within total maximum output power limit of 48W and everything functions normally its
the red LED inside the letter in CIOKS logo will be lit. If the power supply is globally overloaded this O
global status indicator will turn o. The operation of the DC7 is maintained and your pedals are still
powered. The show must go on, but you are just about to lose it. If the global overload is severe or the 24V
AUX outlet is short circuited the main AC/DC converter of the DC7 goes into hiccup mode and both the
CIOKS LED and all seven status LEDs will be pulsing. The power to your pedals is cut o. The DC7 in
hiccup mode will not damage your pedals.
Pedalboard mounting
Pedaltrain
For CIOKS DC7 we recommend three ways of mounting to a Pedaltrain pedalboard. The most solid way
is using the drill template to drill two diagonally positioned ø4,5 or ø5,0mm holes in the pedalboard and
fasten the DC7 to it with the two included screws. An easy alternative way is to use the GRIP bracket
where no drilling is needed. Due to the DC7 y at prole and low weight you can use Dual-’s extremel
Lock tape or industrial Velcro to fasten it below any type of Pedaltrain pedalboard.
Temple Audio
The three threaded holes in the bottom of CIOKS DC7 are aligned with the grid of the Templeboard and
allow for very easy mounting on top or below any Temple Audio pedalboard with the included 2 screws.
We recommend using the two holes positioned diagonally. If you want to make a distance between the
board’s surface and the DC7 to allow space for the Temple Audio nger screws you should get a set of
three 8mm hex stand-os with matching screws (order no. 3HEX) and then use these with all three
threaded holes in the bottom of the DC7.
Other pedalboard types
For other types of pedalboards we recommend using one of the four mounting methods described in the
Pedaltrain Temple Audio sections above or by other means using some of the ve threaded M4 holes or
and metric M4 screws. Remember not to penetrate the DC7 with more than 5mm with the screws used.
Included accessories
Flex cables
CIOKS oers a wide selection of dierent Flex cable types for connection your pedals to the power
supply. Below you see a list of the included Flex cables with your unit:
• Standard Flex type 1 black with 5,5/2,1mm centre negative DC plug x7 –
• Standard Flex type 2 red with 5,5/2,1mm centre positive DC plug –x1
• Standard Flex type 4 green with 5,5/2,5mm centre positive DC plug x1 –
• Standard Flex type 5 black with tip positive 3,5mm Jack plug –x1
• Split Flex type 1 black with two 5,5/2,1mm centre negative DC plugs –x1
• 3-way daisy chain Flex type 1 black with three 5,5/2,1mm centre negative DC plugs –x1
Split Flex should be used if you would like to power two pedals with the same voltage using only one
outlet. In the same manner you should use the 3-way daisy chain if you wish to power three pedals of one
outlet. For further information about Flex cables please have a look at the included Flex cable selection
guide or visit CIOKS web site.
Mounting hardware
We have included all the needed mounting hardware to mount the power supply on top or underneath a
Pedaltrain or a Temple Audio pedalboard. You can of course also attach it to other types of pedalboards.
Not included accessories
The GRIP
This patent pending bracket can be purchased separately and is an easy and drill-free way to mount
CIOKS DC7 below any Pedaltrain board except the smallest Nano model.

Produktspezifikationen

Marke: Cioks
Kategorie: Nicht kategorisiert
Modell: DC7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cioks DC7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Cioks

Cioks

Cioks DC7 Bedienungsanleitung

24 August 2024
Cioks

Cioks 4 Bedienungsanleitung

24 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024