Cioks 4 Bedienungsanleitung

Cioks Nicht kategorisiert 4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cioks 4 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Version 1.03 December 9 Version 1.03 Dec ber 9 201 em 201
Powering CIOKS 4 with a powerbank or other USB source
If you wish to power CIOKS 4 with a powerbank, a USB adapter or other USB source you must use a cable
with a USB A plug at one end and a USB C plug at the other end which goes into CIOKS cable with 4. A
USB C plugs at both ends will not work. Preferably use high-quality cable intended for charging having a a
low resistance and avoiding losing power in the cable and connectors. Powerbanks with 3A of output er
current capability will give you the maximum output power of CIOKS 4 when powered of a powerbank.
That is 9W of output power corresponding to approx. 1000mA at 9V DC for your pedals.
Powering dierent pedal types
Each individual rig is dierent, therefore if you have questions about using the CIOKS 4 power supply
please e-mail your detailed questions including the power requirements of your specic pedals directly to
support@cioks.com.
Not included accessories
CIOKS Mini GRIP
The Mini GRIP bracket allows easy and drill-free mounting of CIOKS 4 power supply below any
Pedaltrain board except the smallest Nano model (order no. MGRIP).
Hex stand-os
A set of four 8mm hex stand-os (only 3 need to be used) to make an oset and space for the nger screws
in-between the power supply and a Templeboard (order no. 4HEX).
Technical specications
Input 1: 5V DC max. 3A (USB C socket) ,
Input 2: 9-24V DC or 9-12V AC, max. 2A (non-polarized 5,5/2,1mm DC socket)
Outputs 1-4: 9V DC / 0mA 66 or
12V DC / 500mA or
15V DC / 400mA or
18V DC / 330mA each
Total output power is max. 24W provided an appropriate and sucient input power source is applied.
Size: 25,4 2.9 (excl. rubber feet) 74x88x mm / x3.5x1.0”
Weight: g / 0.5 230 lb
Warranty period: 5 years worldwide
What’s in the box?
• CIOKS 4 power supply
• 5 Flex cables
• 50cm DC Link cable
• Mounting hardware (2 screws and a hex-key)
• Product sheet (drill guide)
• Flex and DC Link cable selection guide
• Sticker (sheet with 4pcs.)
• Manual
User’s Manual
Version 1.03 December 2019 –
Introduction
Since 1991, the Danish company CIOKS has been providing guitar and bass players with reliable power
supplies dedicated for eect pedals. After more than a quarter of a century, CIOKS has designed the
CIOKS 4 power supply which is part of our Future Power Generation professional power supply product
range. CIOKS 4 is designed to be used with up to four high current pedals (as well as others with lower
current draw) with super exible input power options. Our new CIOKS 4 power supply is a great choice
for small pedalboards or as an expansion of your existing DC7 unit.
Features
• Expand your CIOKS DC7 power supply with 4 additional isolated outlets
• Small and light stand-alone power supply for a small pedalboard
• Use almost any DC or AC adapter to power CIOKS 4, also the 1-SPOT or GigRig Generator
• Power CIOKS 4 with a USB C source like a powerbank
• Slim lb 1-inch prole (25,4mm), only 230g (0.5 )
• Ultra-low noise achieved by multi-stage ltering
• 4 isolated DC-outlets, 6W each (660mA at 9V on each outlet)
• 4 selectable voltages on each outlet (9, 12, 15 or 18V)
• Individual status LED on each outlet and global status LED
• Total maximum output power W 24
• Mounting hardware for Pedaltrain and Temple Audio boards included
• Compatible with CIOKS Mini GRIP for drill-free Pedaltrain mounting
• 5 Flex cables included
• Designed in Denmark, assembled in Poland
• 5-year worldwide warranty
Version 1.03 December 9 Version 1.03 Dec ber 9 201 em 201
Overview
Left
On the left side you ll nd the USB C and the non-polarized DC input sockets and the four RCA sockets wi
being outlets 1-4 for powering pedals.
Top
CIOKS logo has a red LED placed in the middle of the letter ‘O’ and this functions as a global status
indicator For each outlet you have a voltage selector switch and an advanced LED indicator. .
Front
The two holes in the front with metric M4 threads are to be used with the Mini GRIP bracket (sold
separately) for mounting to Pedaltrain boards with no drilling required.
Bottom
The four detachable rubber feet are situated on the bottom of the enclosure. On this same surface you will
nd 3 holes with metric M4 threads which should be used for mounting of the power supply to a
pedalboard.
Getting started
Connect a supply voltage to CIOKS 4 power supply within the specied type and range Set the output .
voltage a given outlet to either 9, 12, 15 or 18V depending on the needs of the particular pedal to be on
powered. Using the right Flex cable type connect your pedal to outlet. Repeat this with your remaining this
pedals.
Advanced LED Monitoring feature
Each isolated outlet has its individual LED status indicator. The indicator is lit in normal operation. The
LED light gets dim when you operate just on the edge of the current mA limit for the voltage you have
chosen on the given outlet. If you overload or short circuit an outlet, the respective LED indicator turns o.
The light intensity of the status LED will be higher when the output voltage is set to higher value an 9V a th
being 12, 15 or 18V.
Global status indicator
If COKS 4 power supply is powered solid power source sucient to provide enough power of a and
everything functions normally the red LED inside the O letter in CIOKS logo will be lit. If the source
supplying CIOKS 4 power supply is too weak and the voltage on the input of CIOKS 4 is too low the
indicator will turn o.
Pedalboard mounting
General
The most solid way is using the drill template being the product sheet and then drill two diagonally
positioned ø4,5mm or ø5,0mm holes in the pedalboard and fasten the CIOKS 4 to it with the two included
screws. Due to CIOKS 4 extremely at prole and low weight you can use Dual-Lock tape or industrial
Velcro to fasten it below any type of pedalboard. In general for mounting in a rack, pedalboard or other
structure we recommend using two of the ve threaded M4 holes (3 in the bottom and 2 in the front) and
matching metric M4 screws. Remember not to penetrate the CIOKS 4 with more than 5mm with the screws
used.
Pedaltrain
For Pedaltrain boards we recommend an easy alternative way of mounting CIOKS 4 unit by using the Mini
GRIP bracket where no drilling is needed.
Temple Audio
The three threaded M4 holes in the bottom of CIOKS 4 are aligned with the grid of Templeboards and
allow for very easy mounting on top or below any Temple Audio pedalboard with the included 2 screws.
We recommend using the two holes positioned diagonally. If you want to make a distance between the
board’s surface and the CIOKS 4 to allow space for the Temple Audio nger screws you should get a set
of three 8mm hex stand-os with matching screws (order no. 4HEX) and then use these with all three
threaded holes in the bottom of the power supply.
Included accessories
Flex cables
CIOKS oers a wide selection of dierent Flex cable types for connection your pedals to the power
supply. Below you see a list of the included Flex cables with your unit:
• Standard Flex type 1 black with 5,5/2,1mm centre negative DC plug x4 –
• 3-way daisy chain Flex type 1 black with three 5,5/2,1mm centre negative DC plugs –x1
The 3-way daisy chain Flex should be used if you wish to power three pedals with the same voltage using
only one outlet. For further information about all CIOKS Flex cables please have a look at the included
Flex cable selection guide or visit CIOKS web site.
DC Link cable
A DC Link cable in 50cm length is included and should be used to connect CIOKS 4 power supply to
CIOKS DC7 power supply and power CIOKS 4 ’s 24V DC outlet. You can also use this cable to connect
of another compatible 24V DC source.
Mounting hardware
We have included all the needed mounting hardware to mount the power supply on top or underneath a
Pedaltrain or a Temple Audio pedalboard. You can of course also attach it to other types of pedalboards.
CIOKS 4 output power capability
A solid DC source of minimum 17V DC is needed to obtain full 24W of output power capability from
CIOKS 4. If a lower voltage is applied to the DC input socket or you are powering the unit of a USB
source its output power capability will be lower than the 2 . The table below shows the maximum 4W
output power of CIOKS 4 depending on the type and voltage of power source which is used to power it.
Input
Input voltage
Input current
Output power
Total output
current @ 9V
1
9V DC
2A
10,8W
1200mA
1
12V DC
2A
15,3W
1700mA
1
15V DC
2A
19,8W
2200mA
1
>17V DC
max. 2A
max. 24,0W
max. 2640mA
1
9V AC
2A
6,3W
700mA
1
12V AC
2A
10,8W
1200mA
2
5V DC
2A
6,3W
700mA
2
5V DC
3A
9,0W
1000mA

Produktspezifikationen

Marke: Cioks
Kategorie: Nicht kategorisiert
Modell: 4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cioks 4 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Cioks

Cioks

Cioks DC7 Bedienungsanleitung

24 August 2024
Cioks

Cioks 4 Bedienungsanleitung

24 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024