Cigweld Stick Welder Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cigweld Stick Welder (6 Seiten) in der Kategorie Lötkolben. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
EasyWeld 160
THINK MIG WELDING
IS HARD TO SET?
THINK AGAIN!
CIGWELD.COM.AU
STICK
BRIGHT BLUE LED DIGITAL
METER FOR OUTDOOR USE
FINE TUNING OF PRE-SET
WIRE FEED SPEED & VOLTS
FULL CONTROL OVER
MANUAL SETTINGS
CREEP START FOR
SOFT WELD STARTS
FACTORY RESET FEATURE
EASY TO USE,
EASY TO SET!
The CIGWELD EasyWeld 160 welding machine oers many benefits of a professional welding machine in a compact, portable, easy to use and
aordable self-contained single phase welding inverter. With QuickSet Plate Thickness Pre-Sets installed the guess work is now taken out of the set-
up, to allow excellent welding results.
• The EasyWeld 160 is the most modern,
easy-to-use inverter MIG Welder designed to
remove the guess work when deciding what
parameters should be set to weld diering
thicknesses of metal.
• Electronic QuickSet control for accurate
adjustment of the welding parameters.
• Suitable for MIG with Shielding Gas and MIG
Gasless Welding.
• STICK Welding capability to 140 Amps, with
built Voltage Reduction Device (VRD) for
extra safety.
• You can weld most metals including Mild
Steel, Stainless Steel, Aluminium and Bronze.
• CIGWELD have specially configured this machine
to be able to produce great welding results
from domestic household 240V x 10A power.
• The EasyWeld 160 machine is ideal for
people who want to do light fabrication,
maintenance and repairs or DIY around the
home, workshop, worksite, or farm, without
compromising on quality or safety.
EasyWeld 160
EASY SELECTION
OF WELDING PROCESSES;
MIG GAS (FOR SOLID WIRE
WITH SHIELDING GAS),
MIG GASLESS (FOR FLUX
CORED GASLESS
WIRES) AND STICK
ELECTRODE WELDING
EASY SELECTION!
WELDING WIRE SIZE
& PLATE THICKNESS
RECOMMENDED MIG WELDING THICKNESS
RANGE: 0.6mm - 6mm IN QUICKSET MODE,
0.6mm - 10mm IN MANUAL MODE
RECOMMENDED STICK WELDING
THICKNESS RANGE:
1.6mm -10mm
FOR GAS
AND GASLESS
WELDING WIRES
QUICKSET MIG & MANUAL MIG WELDER
EasyWeld 160
FEATURES
QuickSet Pre-Sets and Manual Settings
Versatile with factory Pre-Sets and the
ability to manually adjust Volts & Wire
Feed Speed
QuickSet
QuickSet pre-sets for simple MIG welding.
Determined by wire type, wire diameter and
plate thickness.
Input Supply
240 Volt, 50/60Hz, 10 Amp supply lead
fitted to the power source.
Current Range
Current Range for this Power
Source is 30 to 160A (MIG Mode).
Provides DC Output.
Portability
Light weight 10kg inverter in a rugged
case with carry handle and carry strap.
Plate Thickness
Maximum Plate Thickness up
to 10mm, using the machine in manual
mode.
Creep Start
Slow run-in of the wire, to
provide smooth weld starts.
Extra Low Current
Ideal for welding thin sheet metal
in MIG GAS mode with solid 0.6mm MIG Wire
Compliance
Fully compliant to AS 60974.1-2020
Enclosure rated to IP21S.
1 Year Limited Warranty*
*Refer to operating manual
for further details.
Wire Type
Suitable for gas and
gasless wires.
Digital Meter
Easily view all your important welding
parameters including Plate Thickness
and welding Amps at a glance.
No Fuss Settings
Make your job/project easy, QuickSet takes
the guess work out of welding.
Integrated Wire Feed Unit
Suits 100mm & 200mm spools.
STICK (MMAW): 140A @ 15%
Power Source is suitable for 2.0mm,
2.5mm and 3.2mm electrode sizes.
MIG (GMAW / FCAW): 160A @ 15%
0.6-0.8mm: Solid MIG wires
0.8-0.9mm Gasless MIG wires
0.8mm: Aluminium MIG wires
0.8mm: Stainless Steel MIG wires.
Over Temperature Protection
Cut out protection has been
fitted to the power source.
Recommended Generator
9kVA @ 0.8 Power Factor*
*Refer to operating manual
for more information.
Fan Cooled
Keeps the welder running at a higher
duty cycle whilst you are welding.
AWESOME OUTPUT
FOR A SMALL MIG
The EasyWeld 160 delivers a maximum output
of 160Amps DC, which means the machine is
capable of welding metals from 0.6mm up
to 10mm.
In QuickSet mode the machine is limited to
6mm thickness. To reach higher thicknesses
up to 10mm the machine can be manually
adjusted to maximum Wire Feed Speed and
Voltage which delivers exceptional welding
results on larger metal joints.
VERSATILE
You can weld most metals including Mild Steel,
Stainless Steel, Aluminium and Bronze.
As part of our product development we
rigorously tested the Easyweld 160 with
dierent metals locally!
PLATE THICKNESS,
QUICKSET WELDING
Plate Thickness setting allows you to set up
in a flash. There is no guessing the welding
parameters. Use the QuickSet feature to set the
machine to the correct plate thickness you are
welding.
Produktspezifikationen
| Marke: | Cigweld |
| Kategorie: | Lötkolben |
| Modell: | Stick Welder |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cigweld Stick Welder benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lötkolben Cigweld
21 Mai 2024
27 April 2024
23 März 2024
19 März 2024
12 Februar 2024
14 August 2023
Bedienungsanleitung Lötkolben
- Lötkolben Basetech
- Lötkolben Parkside
- Lötkolben Velleman
- Lötkolben Powerfix
- Lötkolben Cocraft
- Lötkolben Ryobi
- Lötkolben Einhell
- Lötkolben Güde
- Lötkolben Westfalia
- Lötkolben Weller
- Lötkolben Silverline
- Lötkolben Yato
- Lötkolben Telwin
- Lötkolben Monacor
- Lötkolben Milwaukee
- Lötkolben Toolcraft
- Lötkolben Powerplus
- Lötkolben Ozito
- Lötkolben Mercury
- Lötkolben Sievert
- Lötkolben Steren
- Lötkolben Mag-Torch
- Lötkolben Weldclass
- Lötkolben Ersa
- Lötkolben Fixpoint
- Lötkolben UNIMIG
Neueste Bedienungsanleitung für -Kategorien-
23 Juni 2024
17 Juni 2024
17 Juni 2024
15 Juni 2024
15 Juni 2024
2 Juni 2024
30 Mai 2024
30 Mai 2024
30 Mai 2024