Canon CR-N500 Bedienungsanleitung

Canon Sicherheitskamera CR-N500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Canon CR-N500 (5 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

This "Installation Guide/Important Information" is comprised

of pages [1/2] and [2/2].

Please be sure to read the "Safety Precautions" section for correct use. After

reading this

Installation Guide/Important Information

, keep it in a readily

accessible location for future reference

. This camera is for indoor use only.

• The cameras described in this document may include models not

available in your country and/or region.

• HDMI is a trademark or registered trademark of HDMI Licensing

Administrator, Inc. in the United States and other countries

• All other company or product names used in this document are

trademarks or registered trademarks of their respective holders

• The contents of this document are subject to change without any prior

notice.

The latest user manuals and software, etc. for this product can be

downloaded from the following website. The user manuals explain the

camera settings and operations. Read them carefully before using the

camera to ensure correct use.

global.canon/ncsp

List of Downloadable Files

User Manuals Software

• Settings Guide

• Remote Camera Control

Application User Manual

• Camera Search Tool

• Remote Camera Control

Application

Firmware

(only provided at time of update)

Check Included Items

Camera

Ceiling Plate

Safety Wire 3 m (9.8 ft.)

Wire Stopper (for safety wire)

Camera-to-Mount Safety Wire 10 cm (3.94 in.)

M3 Screw x 6 (for camera mounting, camera-to-mount safety wire, and wire

stopper x 4)

Compact Power Adapter

Power Cable

IR Remote Controller

Size AAA Battery x 2 (for IR remote controller )

Printed Materials

Symbols used in this manual

Parts indicated in the

Installation Guide/Important Information

/2]

with this icon are not included with the camera, and should be prepared by

the user.

Safety Precautions

Warning

Failure to follow the instructions may

result in death or serious injury.

Do not install in the following places:

•

Places in direct sunlight, near heat-generating objects, or locations subject

to high temperatures.

•

Places near ﬁre sources or ﬂammable solvents (alcohol, thinner, fuel, etc.).

•

Humid or dusty places.

•

Places subject to oily smoke or steam.

•

Conﬁned or enclosed places.

Failure to do so may result in fire or electric shock.

Notes on installation at high places

•

For installation or inspection of this camera, consult the dealer where you

purchased the product.

•

Install the camera in a way that ensures sufﬁcient holding strength

according to the mounting place such as the wall

, ceiling, etc. Also, make

sure that the mounting place can sufﬁciently support the total weight

including the mounting parts and reinforce it if necessary.

•

Prepare ﬁxing screws suitable for the location and type of surface the

camera is to be installed

•

Periodically check the mounting brackets and screws for rust and

loosening.

•

Do not install in unstable places, places subject to signiﬁcant vibration or

impact, or places subject to salt damage or corrosive gas

•

Be sure to attach the safety wire when installing the camera

•

Use the included ceiling plate to install the camera

. Do not install it with

only the tripod screws.

Failure to do so may result in the camera falling or other accidents.

General notes on the camera

•

If any defective conditions such as smoke, strange sounds, heat, strange

odors, damage or cracks on the external case are discovered

, immediately

stop using the camera, unplug the power cable from the outlet (or the LAN

cable for PoE+ power supply), and contact your nearest dealer

. Place the

compact power adapter near the power outlet and avoid placing objects

around the power plug so that the power can be turned off immediately in

the event of an emergency.

•

Do not touch the camera or the connecting cables during a thunderstorm.

•

Do not disassemble or modify the camera.

•

Do not scratch, pull, or forcefully bend the cables

, or put a load on their

connections.

•

Do not spray the camera with water, or otherwise make it wet.

•

Do not touch the camera, the compact power adapter, cable connectors

power plugs, or power outlets with wet hands.

•

Do not allow water, metal or other foreign objects to enter the camera

•

Do not use ﬂammable sprays near the camera.

•

Do not leave the compact power adapter (or the LAN cable for PoE+

power supply) connected when the camera is not in use for long periods

•

Do not use ﬂammable solvents such as alcohol, paint thinner or benzine

when cleaning the camera.

•

Do not block the air intake or air exit vents.

Failure to do so may result in fire or electric shock.

Notes on Power Supply

•

Use only the included compact power adapter when using an AC adapter

•

The included compact power adapter and power cable are for this

product only. They cannot be used for other devices.

•

Do not place heavy objects on the power cable

(or the LAN cable for PoE+

power supply) or pull

, forcibly bend, scratch or modify it.

•

Do not allow metal pins or debris to touch the power plug or terminals.

•

Wipe any dust off of the power plug. Also, if the connection is made to the

power outlet in a dusty area, take measures to prevent tracking

•

Make sure the power plug (or the LAN cable for PoE+ power supply

) is

seated all the way, and do not use it when the insertion is insufﬁcient.

•

Do not use a damaged power plug or a loose power outlet, or use it in a

manner that exceeds the rating of the wiring device such as connecting

multiple plugs to an outlet.

Failure to do so may result in fire or electric shock.

Notes on batteries

•

Do not put batteries in the ﬁre, or do not heat, short circuit or disassemble

them.

•

Do not charge the included batteries.

•

Do not use batteries other than those specified.

Failure to do so may result in fire or electric shock.

Do not use the product at:

•

Places where the use is prohibited, such as in hospitals and on airplanes

•

Places within reach of babies and toddlers

ENGLISH

Installation Guide

Important Information

BIE-7311-000

Use at such places can cause equipment to malfunction due to

radio waves and lead to accidents, or cause electric shock and

injuries.

Caution

Failure to follow the instructions may

result in injuries or property damages.

Notes on installation

• Installation must be carried out safely and securely in accordance with the

relevant regulations for technical standards of electrical installation

Failure to do so may result in accidents.

Notes on installation

• Take care not to damage wiring or piping.

Failure to do so may result in damage to surrounding items.

General notes on the camera

• Do not touch the edges of metal parts with bare hands.

• Be careful not to get your ﬁngers caught when installing.

Failure to do so may result in injuries.

Notes on batteries

• Remove the batteries when they have been used up or will not be used for

a long time.

• When replacing the batteries, replace both batteries at the same time

Also, do not use different types of batteries together.

• Make sure + and

of the battery are oriented correctly.

• If any liquid from inside the battery gets on your body due to leakage,

rinse it off thoroughly with water.

Failure to do so may result in injuries and malfunctions.

Important

• Do not install the camera in places where radiation

, X-rays

, strong radio

waves or strong magnetism are generated. It may cause video and

audio disturbance, noise, or malfunctions.

• We recommend the installation of a lightning arrester

(a surge protection

device) as a measure against failures caused by lightning strikes

• Take measures to remove static electricity before performing any

procedures.

• Do not connect the PoE cable to the RS-

422 terminal.

• Do not connect the compact power adapter to a transformer

• If there is condensation

, please wait to power on, until the condensation

dissipates.

• Do not hold the device by the camera head

• Do not turn the camera rotator by hand

• After turning off the power, do not turn the power on again for at least

ﬁve seconds.

• Do not point the camera at strong light sources

(such as the sun on a

clear day or strong artiﬁcial light sources

). Internal components such as

the image sensor could be damaged

• Do not carry the camera on a tripod

Precautions for Use (Disclaimer)

Compliance with Applicable Laws/intellectual Property Rights:

Please note

that your use of this product may subject you to certain laws, rules and

regulations, including but not limited to, privacy, wiretapping and intellectual

property and publicity laws

. Please be sure your use of this product and/or

any resulting recordings or footage complies with applicable laws

, rules and

regulations.

Canon Inc. and its affiliates shall have absolutely no liability with respect

to any claims made by third parties that your use of this product does not

comply with applicable laws, rules and regulations and any resulting claims

brought against you by third parties alleging non-compliance with such laws

or otherwise violates any third party's intellectual property, personal, privacy

or proprietary rights as a result of your use of the product

. We are also not

responsible to you for any liability whatsoever resulting from your use

, and/or

installation of this product, and/or any loss of any recordings or footage.

Limited Warranty: Please check the in

-box materials for more information

about the limited warranty that pertains to your product.

Installation: This product should NOT be installed outdoors. You are solely

responsible for the proper installation of this product. To the extent permitted

by law, Canon Inc. and its affiliates shall have absolutely no liability to you

with respect to any damages or liabilities associated with the improper use of

or the installation of this product

, or for any personal injuries sustained by you

or any third parties as a result of any such improper use or installation of this

product, whether or not the installation of this product was by you

, or by any

third party.

Privacy:

• Do not install this product in areas where people have a reasonable

expectation of privacy, including but not limited to, bedrooms, dressing

rooms, locker rooms and rest room facilities

• Some jurisdictions require signage disclosing the existence of camera

equipment. Please check your own area's laws for requirements.

• Making audio recordings is heavily regulated and can vary signiﬁcantly

by area. Please check laws in your jurisdiction before making any audio

recordings.

OTHER IMPORTANT INFORMATION: Please see other important information

pertaining to the use of this product by reading our Settings Guide, which

can also be found at global.canon/ncsp, prior to using this product.

About lamp

Lamp Lamp status Status

STATUS lamp

Orange light

Standby

Power shortage

Orange light

BLINKING

PT position error

Firmware being updated

Device failure

POWER lamp

Orange light

ON Standby

Green light

ON Power on

Green light

BLINKING

Initializing (Starting and restarting)

IR remote control signal received

(Blinks twice)

Moving to or returning from standby

Device failure

Tally lamp

Red light ON Distributing data

Green light

ON Preparing to distribute data

Before using the camera

Initial settings

Be sure to make the initial settings before use

. If the initial settings are not

made, the video cannot be outputted. Refer to the "Settings Guide" for

details.

SERVICE switch settings

Set the camera number to be operated by the IR remote controller

Switches should be set before turning on the power.

REMOTE CAMERA

Notes for When and After

Installing the Camera

When Installing the Camera

Installation at high places

Caution

Request a professional installer for all

installation work. Never try to install the

camera yourself. Doing so may result in

unforeseen accidents such as dropping

the camera or electric shock.

When installing the camera at a high place

, use the ceiling plate to ﬁx the

camera. Fix the ceiling plate tightly with four M4 screws (pan head, binding

head, etc.).

When working with the camera upside down, support the camera to prevent

it from wobbling in order to attach or remove the rubber feet or the camera

to-mount safety wire. Keep the four rubber feet and four screws that have

been removed for reuse in case of a change in the installation

Ceiling mount

The camera is hung upside down from the ceiling or other location using the

ceiling plate.

The procedure provided in the "Installation Guide/Important Information" [2/2]

explains this installation method. The weight of the camera (

body only) is

Approx. 4.1 kg (9.04 lb.). Reinforce the ceiling depending on its structure and

material to ensure the sufficient holding strength to support the total weight

including the camera and the mounting parts, and install.

Standing mount

The camera is ﬁxed to a high place using the ceiling plate

Follow the same procedure as for the ceiling mount, except for the direction

of the camera and logo plate inversion.

Tripod mount

Attach the tripod by ﬁxing two screws to the two screw holes for tripod.

Use 1/4-20UNC screws and tighten them securely, and set the tripod on a

ﬂat surface with no steps.

Also refer to the instructions in the "Installation Guide/Important Information"

[2/2], if necessary.

4.5 – 5.5 mm (0.18 – 0.22 in.)

1/4-20UNC

Desktop

Install the camera on a stable, horizontal surface such as a table.

Also refer to the instructions in the "Installation Guide/Important Information"

[2/2], if necessary.

Connecting the Camera

1 2 3 4 5 6 7 8

10 91112131415

1. LAN terminal

This terminal is for a network connection (RJ-45 connector).

The built-in PoE+ (Power over Ethernet+) function allows the camera to be

cable.

Use a category 5e or higher STP (shielded type) LAN cable, up to 100 m (328 ft.)

in length.

Important

• Some PoE+ HUBs can limit the power for each port, but applying limits

may interfere with performance. In this case, do not limit the power.

• Some PoE+ HUBs have limits for the total power consumption for

the ports, which can interfere with performance when multiple ports

are in use

. For more information, check the instruction guide for the

corresponding PoE+ HUB.

2. USB terminal

For future expansion.

3. Memory card slot

For future expansion.

4. RESET switch

Initialize the camera settings to the factory defaults. Refer to the "Settings

Guide" for details.

5. HDMI OUT terminal

Terminal for HDMI output.

6. SERVICE switch

Set the camera number operated by the IR remote controller

(Refer to "Before using the camera" > "SERVICE switch settings".)

7. 3G-SDI OUT terminal

Terminal for 3G-SDI output (BNC).

8. GEN-LOCK terminal

Terminal for the synchronization signal input (BNC) to synchronize the videos

from the camera and external devices.

If the reference signal is unstable, external synchronization is not possible.

Subcarriers do not synchronize.

9. INPUT1/INPUT2 terminal

XLR terminals for audio input. It can be used for microphone/line input.

• Microphone input: Input impedance 600

Ω ±10%

Microphone power (Phantom power): 48 V ±1 V

Bias resistance: 6.8 Ω ±1%

• Line input: Input impedance 10k

Ω ±10%

10. LED for phantom power supply

It is lit in blue when the phantom power is supplied.

11. MIC terminal

Stereo 3.5 mm ( 0.14 in.) terminal for audio input. It can be used for

microphone/line input.

• Microphone input: Input impedance 1

.5k Ω or higher

Microphone power: 2.4 V ±0.2 V

Bias resistance: 2.2 k Ω ±5%

• Line input: Input impedance 1

.5 k Ω or higher

12. RS-422 terminal

Serial terminal (RJ -

45 connector) for RS-422.

Connect the GNDs on both ends to stabilize the voltage level of the signal

Use category 5e or higher STP cables.

number Function

1 TX

Output (

)

2 TX +Output (+)

3 RX

Input (

)

4 GND –

5 GND –

6 RX+Input (+)

7 NC –

8 NC –

13. DC IN 24V terminal

Power supply terminal for the compact power adapter.

14. GND terminal

Ground terminal of the camera.

It is used to install a lightning arrester (surge protection devices).

15. Cable clamp

Cable clamp to prevent cord disconnection

Pass the compact power supply cord through the clamp to prevent the cord

from coming off.

Note

• The camera is not equipped with a power switch

. To turn the camera

on and off, insert and remove the cable of the compact power adapter

connected to the "13. DC IN 24V terminal" or the PoE+ HUB connected

to the "1. LAN terminal", which supplies power.

When both the PoE+ HUB and the compact power adapter are

connected, the compact power adapter takes priority. If the compact

power adapter is disconnected while both adapters are connected

power to the camera will be interrupted

. In this case, power can be

restored by disconnecting and reconnecting the LAN cable

• The audio input terminals ("9. INPUT1/INPUT2 terminal", "11. MIC

terminal") and microphones should be set using the Settings Page. Refer

to the "Settings Guide" for details.

Specifications

Please refer to the 'Speciﬁcations' in the

'Appendix' of the "Settings Guide"

for speciﬁcations not listed below.

Pan operation range: Horizontal ±170°

Tilt operation range: Vertical

30° – +90°

Operating Environment: Temperature: 0 – +40 (+32°F – +104°F)

Humidity: 10% – 90%

(without condensation)

Storage Environment: Temperature: 0 –

+40

(+ 32°F –

+104°F)

Humidity: 10% – 90% (without condensation)

Power Consumption: PoE+ Input: Approx. 19.6 W* max

(body only)

DC Input: Approx. 18.6 W max

. (body only)

*Class 4 (25.5 W required

) for power supply devices

Dimensions (W x H x D): Approx. 200 x 269 x 208 mm (

7.87 x 10 .59 x 8.19 in.)

(excluding protrusions)

Weight: Approx. 4.1 kg (9.04 lb.) (

body only)

Country Regulations

About wireless communication

Regarding countries and regions where radio communication functions are

acceptable

Since the utilization of the radio communication functions can be legally

restricted by a country or region, it may not be possible to utilize out of the

country or the region where the product is purchased. Canon shall not be

liable for any incidents that may incur as a result of the utilization of the

radio communication functions in any country or region other than where the

product is purchased.

FCC NOTICE

Remote Camera

, Model Name: CR-N500

This device complies with Part 15 of the FCC Rules

. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference

, and (2

) this device must accept any interference received

including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for

a Class A digital device

, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment

This equipment generates

, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the user manual

, may cause

harmful interference to radio communications

. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless

otherwise specified in the manual

. If such changes or modifications should

be made, you could be required to stop operation of the equipment.

Use of shielded cable is required to comply with class A limits in Subpart B

of Part 15 of FCC Rules.

Model: CR-N500 (

including WLAN Module Model ES202, FCC ID: AZD239 /

IC: 498J-239)

This device complies with Part 15 of FCC Rules and ISED

's applicable

licenceexempt RSS standard

(s). Operation is subject to the following two

conditions:

(1) this device may not cause interference

, and

(2) this device must accept anyinterference

, including interference that may

cause undesired operation of this device.

This equipment complies with FCC/ISED radiation exposure limits set

forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF)

Exposure rules. This equipment should be installed and operated keeping

the radiator at least 20 cm or more away from person

's body.

This transmitter must not be co-located or operated in conjunction with any

other antenna or transmitter.

FDA regulation

This product has not been evaluated by the Food and Drug Administration

(FDA) for use as a medical device. When incorporated into a system with

medical applications

, FDA regulations may apply. Therefore, please consult

your legal advisor to determine whether FDA regulations apply

Complies with

IMDA Standards

DB00671

European Union regulatory notices:

Remote Camera, Model Name: CR

-N500

Warning

This is a class A product

. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

Use of shielded network cable is required to comply with Class A limits in

EN55032.

Wireless LAN Specifications

Frequency range: 2,401 MHz – 2,473 MHz

Maximum output power: 9.48 dBm

For EU

Hereby, Canon Inc.,

declares that the radio equipment type CR-N500 is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

http://www.canon-europe.com/ce-documentation

For UK

Hereby, Canon Inc.,

declares that the radio equipment type CR-N500 is

in compliance with the relevant statutory requirements

. The full text of the

declaration of conformity is available at the following internet address:

https://www.canon-europe.com/ce-documentation/

Only for European Union and EEA

(Norway, Iceland and Liechtenstein)

These symbols indicate that this product is not to be disposed of with your

household waste, according to the WEEE Directive

(2012/19/EU), the Battery Directive (2006/66/EC) and/or

national legislation implementing those Directives

If a chemical symbol is printed beneath the symbol

shown above, in accordance with the Battery Directive

this indicates that a heavy metal

(Hg = Mercury,

Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at

a concentration above an applicable threshold specified in the Battery

Directive.

This product should be handed over to a designated collection point, e.g.,

on an authorized one-for-one basis when you buy a new similar product or

to an authorized collection site for recycling waste electrical and electronic

equipment (EEE

) and batteries and accumulators

. Improper handling of

this type of waste could have a possible impact on the environment and

human health due to potentially hazardous substances that are generally

associated with EEE

. Your cooperation in the correct disposal of this product

will contribute to the effective usage of natural resources

For more information about the recycling of this product, please contact your

local city office, waste authority

, approved scheme or your household waste

disposal service or visit www.canon-europe.com/sustainability

/approach/.

CANON INC.

30-2, Shimomaruko 3-chome

, Ohta-ku, Tokyo 146-8501, Japan

Canon U.S.A

. Inc.

One Canon Park

, Melville, NY 11747 , U.S.A.

Tel No. 1-800-OK-CANON (1-

800 -652-2666

)

CANON EUROPA N

.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands





L > 300 mm

0.6 N·m

M3 x 4





180°



7 8

BIM-7167-000

L < 100 mm





















M3M3

θ ≦ ± °5

Produktspezifikationen

Marke:	Canon
Kategorie:	Sicherheitskamera
Modell:	CR-N500
Breite:	200 mm
Tiefe:	208 mm
Gewicht:	4100 g
Produktfarbe:	Schwarz
Höhe:	269 mm
Energiequelle:	DC, PoE
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
HD-Typ:	4K Ultra HD
Anzahl HDMI-Anschlüsse:	1
Ethernet LAN Datentransferraten:	1000 Mbit/s
Kopfhörerausgang:	Ja
Megapixel (ca.):	- MP
Maximale Framerate:	59.94 fps
Zoom-Fähigkeit:	Ja
Digitaler Zoom:	20 x
Maximale Video-Auflösung:	3840 x 2160 Pixel
Fokuseinstellung:	Auto/Manuell
PTZ Kontrolle:	Ja
Schwenkbereich:	-170 - 170 °
Neigungswinkelbereich:	-30 - 90 °
Brennweitenbereich:	8.3 – 124.5 mm
Mindestbeleuchtung:	1.5 Lux
Blendenbereich (F-F):	2.8 - 4.5
Sensor-Typ:	CMOS
Kamera-Typ:	Einzelne Kamera
Bildstabilisator:	Ja
Optischer Zoom:	15 x
Weißabgleich:	Auto, Daylight, Manual, Tungsten
Power over Ethernet (PoE) Spannung:	24 V
BNC Ausgänge:	1
Effektive Sensor Auflösung:	8.29 MP
Horizontales Sichtfeld (breit):	73 °
Horizontales Sichtfeld (Tele):	5.7 °
Streaming Kapazität:	Ja
Neigungsgeschwindigkeit (min.):	0.1 °/Sekunde
Neigungsgeschwindigkeit (max.):	100 °/Sekunde
Schwenkgeschwindigkeit (min.):	0.1 °/Sekunde
Schwenkgeschwindigkeit (max.):	100 °/Sekunde
Netzwerk-Streaming:	Ja
Vertikales Sichtfeld (Tele):	3.2 °
Vertikales Sichtfeld (Weitwinkel):	45.2 °