Bikemate E83005 Bedienungsanleitung

Bikemate Fahrradcomputer E83005

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bikemate E83005 (2 Seiten) in der Kategorie Fahrradcomputer. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

WIRELESS BICYCLE COMPUTER

USER GUIDE

After Sales Support

Now you have purchased a Bikemate

product you can rest

assured in the knowledge that as well as your 3 year parts

and labour guarantee you have the added peace of mind of

dedicated helplines and web support. The 3 year warranty

does not affect your statutory rights.

• Maximum speed (max 99.9 km/h or mph)

• Time (12 hr / 24 hr display)

• Average speed (0-99.9 km/h or mph)

• Scan function (for DST, MXS, AVS, TM)

• Cache memory (for TM, DST, AVS)

• Speed comparison (+/-)

• Speed trend ( or )

• Service indicator

• Odometer save function

• Temperature display (-10⁰C to +50⁰C )

• Temperature display setting (⁰F / ⁰C)

• Calories

• Fat Burning

• Automatic start/stop

Ride speed

This indicates the current speed

(0-99 km/h).

Daily distance (DST)

(step information function, reset function)

The distance travelled is displayed with

DST. The trip kilometre counter switches on

automatically with the tachometer. To set the trip kilo-

metre counter to 0, press the left button for about 2 sec-

onds in the DST function.

IRL

WIRELESS BICYCLE COMPUTER

Congratulations!

You have made an excellent choice with the purchase

of this quality Bikemate® product. By doing so you now

have the assurance and peace of mind which comes from

purchasing a product that has been manufactured to the

highest standards of performance and safety, supported

by the high quality standards of ALDI.

Total distance (ODO)

The kilometre counter adds up the total num-

ber of kilometres travelled and displays this

with ODO on the screen. The kilometre coun-

ter can only be reset to zero by removing the battery or by

simultaneously pressing both buttons for about 3 seconds.

Trip time (TM)

The trip time measurement function is in-

dicated by TM on the display. This function

automatically switches on with the speed-

ometer and is suspended each time the bike stops so that

only the actual travel time is measured. The clock is set

to 0 by pressing the left button in the DST function.

Maximum speed (MXS)

The maximum speed is indicated on the dis-

play with MXS and is saved automatically. To

delete the maximum speed, press and hold

the left button.

Time (12 hr / 24 hr)

By pressing the right-hand button you ar-

rive at the next function (time). To set the

time, press the left button for 3 seconds. By

doing so you can then select whether the time is shown

in the 12 hour or 24 hour mode by pressing the right

button. After selecting the display press the left but-

ton which makes the hour indicator flash. You can now

set the hours with the right button. To set the minute

indicator, please press the left button again. The minute

indicator then flashes which you can set by pressing the

right button. After setting the time press the left button.

Average speed (AVS)

The average speed is displayed by AVS. This

function is connected with the trip timer so

that only the average speed for the actual

trip is saved.

Scan function (SCAN)

After setting the scan function all functions

(DST, MXS, AVS, TM) are displayed automati-

cally one after the other.

Cache memory

Pressing the left button, the computer

has a unique cache memory with which

the display can be retained at the end of a

journey leg and the values for TM, DST and AVS can

be reviewed at a later date (the memory is shown by

pressing the right-hand button). This is especially

practical for measuring the time if you go past the fin-

ish line in a race because the automatic stop clock can-

not be stopped manually. It works in such a way that on

cycling past the finish line press the left button for a

time so that the display is retained.

Speed comparison

(cadence)

A “+” or “-” sign is shown on the right-hand

side of the speed display to indicate wheth-

er you are travelling faster or slower than the average

speed (AVS). A “-” sign indicates that you are travelling

below the average speed.

Speed trend

(acceleration and deceleration)

A symbol that represents a cyclist is shown

on the left-hand side of the speed display. A bike trav-

elling forwards indicates that you are accelerating. A

bike travelling backwards indicates that you are getting

slower.

Odometer save function

The save function (SAVE) enables you to save

the distance covered (ODO) which is important

information for you. This information is also retained after

changing the battery. Press the right button to call up the

“ODO” mode after changing the battery and the re-setting

of the wheel sizes, and save the information under “ODO”.

Afterwards press and hold the left button for two seconds

until the last setting flashes. Press the right button to set

the display, confirm this with the left button and make the

entry. Repeat the above process to set the required value

for the odometer display. Press the left button once again

and return to “ODO” mode.

Temperature display settings

Optionally, the bike computer can display the

temperature in ⁰C (Celsius) or F (Fahrenheit).

For temperature indication keep the left but-

ton depressed for 2 seconds. ⁰C is shown. By pressing the

right button the temperature is converted to F. Confirm the

choice with the left button.

Calorie counter (CAL)

The average energy use in calories (cal) is au-

tomatically counted by means of the calorie

counter. To reset the calorie counter hold the

left button for 2 seconds in CAL mode. Press the right but-

ton to obtain the monitoring function FAT.

Fat burning (FAT)

This approximate value applies to the amount

of fat (in g) burnt during the trip. To reset the

value for fat to zero hold the left button down

for about 2 seconds. Press the right button to obtain the

monitoring function SCAN FUNCTION.

Computer installation

Push the bike computer into the installation bracket until it

clicks into place. Press the release button to detach the bike

computer. (See Fig. 1.)

Left Right

release

button

Fig. 1

We want you to be completely satisfied with your

purchase so this Bikemate® product is backed by a

comprehensive manufacturer’s 3 year warranty and an

outstanding after sales service through our dedicated

Helpline.

We hope you will enjoy using your purchase for many

years to come. If you require technical support or in

the unlikely event that your purchase is faulty please

telephone our Helpline for immediate assistance. Faulty

product claims made within the 3 year warranty period

will be repaired or replaced free of charge provided that

you have satisfactory proof of purchase (keep your till

receipt safe!). This does not affect your statutory rights.

However, be aware that the warranty will become null

and void if the product is found to have been deliberately

damaged, misused or disassembled.

Functions

If you press the lower button the individual functions are

listed on the display.

Functions

• Ride speed (0 – 99.9 km/h or mph)

• Daily distance (max 999.9 km or miles)

• Total distance (max 999.9 km or miles)

• Trip time (0:59’ 59’ - hours, minutes, seconds)

MODEL: E83005

AFTER SALES SUPPORT

GB 00800 / 68546854 monz-gb@teknihall.com

IRL 00800 / 68546854 monz-ie@teknihall.com

(free of charge)

MODEL: E83005

AFTER SALES SUPPORT

GB 00800 / 68546854 monz-gb@teknihall.com

IRL 00800 / 68546854 monz-ie@teknihall.com

(free of charge)

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE,

WARWICKSHIRE, CV9 2SH.

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE.

Visit us at www.aldi.com

Automatic start/stop

To save the battery the device switches itself off after

5 – 6 minutes if no impulse is received by the sensor. To

switch the device on again, press one of the buttons.

Setting the wheel sizes

Press and hold the left button and the right

button for 2 seconds (or after replacing the

battery) to switch the device to the wheel

size entry mode. Multiply the wheel diameter, d (figure

2), in mm by 3.1416 in order to establish the wheel coef-

ficient, c. Press the left button to select the position that

needs to be entered and then the right button to enter the

required number (for fast forward keep pressed down).

Press the left button again to select km/mile. (Please

note that removing the battery deletes the wheel size

information).

- Distance in mm per revolution -

Please use this table for assistance in calculating the

wheel diameter and wheel circumference.

Choice between miles and kilometres

After setting the wheel size the symbol “KM” will blink

above the wheel size entry. If you would like the com-

puter to show the speed in km/h press the left button.

If the computer should calculate in mph press the right

button first and then the left button.

Calorie counter

On the display the prompt km/h will then blink. At this

point you have to set your age. By pressing the right but-

ton you can change the value and go forward to the next

figure using the left button. In the bottom line you can

set your body weight in kg. By pressing the right button

you can change this value and go forward to the next fig-

ure using the left button.

Service indicator

After setting the wheel diameter the indicator 600 km

flashes. In the bottom left corner you will see a spanner.

This function enables you to set the number of kilome-

tres until the next service of your bike. By pressing the

right button you can choose to set a number between

200 and 800 km as a reminder to service your bike. By

pressing the left button the value is saved. On reaching

the pre-set number of kilometres a spanner appears in

the display. By pressing the left button you can switch

off the reminde

BATTERY DISPOSAL:

Batteries must not be placed in household rubbish contai-

ners. You are obligated by law to return used batteries and

rechargeable batteries. They can be dropped off at our shop

or at other locations near you (e.g., other businesses or muni-

cipal collection points). Batteries and rechargeable batteries

are marked with a crossed-out dustbin and with the chemical

symbol of the toxic substance, i.e. „Cd“ for cadmium, „Hg“ for

mercury and „Pb“ for lead.

BATTERY SAFETY

Always follow warnings and manufacturers instrtuctions for

both the batteries and the battery-operated product. Use only

Fig. 2

WHEEL SIZES

Wheel size in

inches

ETRTO

Nr.

Wheel

coefficient

16 x 1.75 47 – 305 1216

20 x 1.75 47 – 406 1623

24 x 1.75 47 – 507 1940

26 x 1.6 44 - 559 2051

26 x 1.75 x 2 47 - 559 2070

26 x 1.9 50 - 559 2089

26 x 2.00 54 - 559 2114

26 x 2.125 57 - 559 2133

26 x 1 3/8 37 - 590 2105

26 x 1 3/8 x 1 1/2 37 - 584 2086

26 x 3/4 20 - 571 1954

27 x 1 1/4 32 - 630 2199

28 x 1.5 40 - 622 2224

28 x 1.75 47 - 622 2268

28 x 1 3/8 x 1 5/8 37 - 622 2205

700 x 18C 18 - 622 2102

700 x 20C 20 - 622 2114

700 x 23C 23 - 622 2133

700 x 25C 25 - 622 2146

700 x 28C 28 - 622 2149

700 x 32C 32 - 622 2174

700 x 35C 37 - 622 2205

700 x 40C 40 - 622 2224

2 mm Max

SENSOR

Fault Problems

No tachometer display Incorrect magnet/sensor alignment

Delayed display of request The temperature range lies outside of

the specified minimum value (0-55⁰C)

Black screen The temperature is too high or the

display was exposed to direct sunlight

for too long

Failing screen display Empty battery or the power supply is

too weak

Incorrect set-up for distant Check the sensor and magnet reading

positions, that the battery is correctly

fitted and the fitting is in accordance

with the instructions

The display shows blurred / Remove and reinsert the battery

irregular symbols

click

the correct type and size battery indicated. Check the contacts

of both the battery and the battery-operated product for cleanli-

ness. Always insert the batteries correctly with regard to polari-

ty (-/+), matching the positive and negative symbols of both bat-

tery and product. Putting them in backwards, the product will

sometimes still operate, but may inadvertently charge the bat-

teries resulting in venling or leaking. Remove and safely dispose

or exhausted batteries immediately. Replace all batteries in bat-

tery-operated products at the same time and with the batteries

of the same type and manufacture. Do not short circuit batteries.

When the positive (+) and negative (-) terminals of a battery are

in contact with each other, the battery can become short circui-

ted. For example, loose batteries in a pocket with keys or coins

can be short circuited possibly resulting in venting or explosi-

on. Do not heat batteries. Do not crush, puncture, dismantle or

otherwise damage batteries. Do not charge non-rechargeable

batteries. Keep batteries out of reach of small children. If you

suspect that a battery has been swallowed, seek immediate me-

dical advice. Please retain for future reference.

PACKING DISPOSAL

The packaging is made of 100% environmentally friendly ma-

terials which can be disposed of at local recycling points.

COMPUTER DISPOSAL

For disposing of the computer and radio sensor,

please obtain advice from your local authority or

town council.

Wheel size

in inches

ETRTO

Nr.

Produktspezifikationen

Marke:	Bikemate
Kategorie:	Fahrradcomputer
Modell:	E83005

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bikemate E83005 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fahrradcomputer Bikemate

Bikemate AS9-FCS-50 Bedienungsanleitung

19 August 2024

Bikemate HO-FCS-51 Bedienungsanleitung

16 August 2024

Bikemate MCP30102 Bedienungsanleitung

16 August 2024

Bikemate AS7-FC-2C Bedienungsanleitung

13 August 2024

Bikemate E83005 Bedienungsanleitung

12 August 2024

Bikemate 22967 Bedienungsanleitung

10 August 2024

Bikemate T52432 Bedienungsanleitung

12 Juli 2024

Bikemate AS7-FC-2B Bedienungsanleitung

16 Juni 2023

Bikemate 22970 Bedienungsanleitung

8 Oktober 2022

Bedienungsanleitung Fahrradcomputer

Neueste Bedienungsanleitung für -Kategorien-

Cateye CC-ED400 Enduro Bedienungsanleitung

14 Oktober 2024

Blackburn Delphi 5.0 Bedienungsanleitung

14 Oktober 2024

Prophete 0512 Bedienungsanleitung

13 Oktober 2024

CicloSport CicloMaster CM 408 Bedienungsanleitung

13 Oktober 2024

Vetta RT255L Bedienungsanleitung

12 Oktober 2024

Filzer dZ4LW3 Bedienungsanleitung

12 Oktober 2024

Falk Pantera Bedienungsanleitung

12 Oktober 2024

Trek Incite 11i Bedienungsanleitung

12 Oktober 2024

Sunding SD-563A Bedienungsanleitung

10 Oktober 2024

Blackburn Delphi 4.0 Bedienungsanleitung

9 Oktober 2024