BDI Corridor 8172 Bedienungsanleitung

BDI Kast Corridor 8172

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BDI Corridor 8172 (7 Seiten) in der Kategorie Kast. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Corridor® Media furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer
with a moist cloth.
Your Corridor® Media furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI retailer.
For your convenience, wheel assembly is pre-installed. Wheels can
be removed if desired.
bdiusa.com
customerservice@bdiusa.com
CORRIDOR® 8172
AUDIO TOWER
B1 Hex Wrench x 1
B3 Hex Wrench x 1
Removal of wheels (optional):
Detach from Wheel Assembly
Metal Leg E,F by removing the
Leveler and Screw.
Reinstall toLeveler Metal Leg E,F.
B2 Hex Wrench x 1
A Phillips Screwdriver x 1
D 1/4-20 x 10 mm
Machine Screw x 12
E Left Leg x 1
F Right Leg x 1
K Back Panel x 1
G Glass Top x 1
L LP Storage Bars x 3
E,F
E,F
C Cabinet x 1
H Rubber Bumpers x 4
L Stretcher x 1
M 1/4-20 x 63 mm
Machine Screw x 1
I Large Adjustable Shelf
x 2
J Small Adjustable Shelf
x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 05.11.2016 V5
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 8172
AUDIO TOWER
2
Step 2 - Build Base Assembly
Slide tab of into ends of Connect by using and Metal Legs E,F Stretcher L . Screw D Hex Wrench B1.
Fully tighten all screws.
Step 3 - Screw DPosition cabinet on its back. Prop up the bottom edge with a book. Using , attach Leg
Assembly to Cabinet C with Hex Wrench B1 . Do not overtighten. *Note: Each of the metal legs has level-
ers that can be adjusted using the Hex Wrench B2 .
D
FE
F
L
D x 4
D x 8 E
F
C
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 8172
AUDIO TOWER
3
Step 4 - Install Glass
Position the cabinet upright and remove paper backing from and place near corners of Rubber Bumpers H
the top of the cabinet (within 1” of the edge). Place Glass Top G Cabinet C on top of centered left to right and
front to back.
Step 5 - Install Back Panel
Install Back Panel K to the backside of the cabinet by inserting top edge in upper channel then tipping bottom
edge forward and into lower channel.
NOTE: Velcro straps are included for your convenience to facilitate wire management.
G
H
H
H
C
H x 4
Space for power strip
K
1
2

Produktspezifikationen

Marke: BDI
Kategorie: Kast
Modell: Corridor 8172

Brauchst du Hilfe?

Wenn Sie Hilfe mit BDI Corridor 8172 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kast BDI

Bedienungsanleitung Kast

Neueste Bedienungsanleitung für -Kategorien-