BaByliss Super-X Metal S996U Bedienungsanleitung

BaByliss Bartschneider Super-X Metal S996U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BaByliss Super-X Metal S996U (12 Seiten) in der Kategorie Bartschneider. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
SUPER-X METAL SERIES
STUBBLE TRIMMER
S996U
SAFETY CAUTIONS
• This appliance should only be used as described within this
instruction book. Please retain for reference.
IMPORTANT CHILD SAFETY
• ALWAYS keep out of the reach of children (during and after
use).
• This appliance should not be used, cleaned or maintained
by children.
• Always take extra care if used on children or near children.
• Do not use on very young children.
IMPORTANT SAFETY
• This appliance can be used in the bath or shower.
• UK Only: Do not charge this appliance in the bathroom.
• Outside the UK: If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous even
if the appliance is switched off. For additional protection the
installation of a residual current device (RCD) with a rated
residual operating current not exceeding 30mA is advisable
in the electrical circuit supplying the bathroom. Ask your
installer for advice.
CAUTION: Keep the power cord and the appliance dry.
• Always inspect the appliance before use for noticeable signs
of damage. Do not use if damaged or if the appliance has
been dropped. In the event of damage contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’ section
for further information).
• Do not use the appliance if the charging adaptor or lead
is damaged. In the event of damage, discontinue use
immediately. If the charging adaptor or lead is damaged, it
must be replaced by the manufacturer. Return the appliance
to the Customer Care Centre (refer to ‘UK After Sales Service’
section for further information). No repair must be attempted
by the consumer.
• Only use the attachments supplied with this appliance.
• WARNING! For the purposes of recharging the battery, only
use the detachable charging supply unit provided with this
appliance (CA92). This symbol indicates there is a
detachable power supply for means of charging.
• Do not leave the appliance unattended when switched on.
• Do not place the appliance on any surface whilst in operation.
• Special care is required when using the appliance close to
the ears, eyes and face.
• This appliance should not be used by adults whose reduced
physical, sensory or mental capabilities, or whose lack of
experience and knowledge, might cause a hazard, unless
they have been correctly instructed to understand the safe
use and hazards involved and are adequately supervised.
• This product contains a Lithium Ion rechargeable battery
that is not to be removed from the appliance for charging.
The batteries in this appliance are non-replaceable. Batteries
must be disposed of safely at the end of life. Please take to a
recycling centre for safe disposal.
• The supply terminals are not to be short circuited.
• For indoor, household, domestic use only.
• This product complies fully with all appropriate EU and UK
Legislation and the standards relevant to this type and class
of appliance. We are an ISO9001:2015 certied company
that continually evaluates our Quality Management System
performance. If you have any queries regarding product
safety and compliance, please contact the Conair Customer
Care Line (refer to ‘UK After Sales Service’ section).
INSTRUCTIONS FOR USE
IMPORTANT! Only use the adaptor supplied with this appliance.
General
• Always inspect the appliance before use to ensure the trimmer blades
are free from hair, debris etc.
• Use on clean, dry hair that has been combed until tangle-free.
Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades after every use.
• When using the oil for the rst time, unscrew the cap and cut off the very
end of the plastic tube with a pair of scissors.
• Remove the comb guide and switch the appliance on.
• Holding the trimmer at a 45 degree angle, gently squeeze the oil tube and
apply 2 drops directly onto the blades.
• Leave the unit on for a further few seconds to allow the oil to thoroughly
spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with a
cloth before using on hair.


Produktspezifikationen

Marke: BaByliss
Kategorie: Bartschneider
Modell: Super-X Metal S996U

Brauchst du Hilfe?

Wenn Sie Hilfe mit BaByliss Super-X Metal S996U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bartschneider BaByliss

Bedienungsanleitung Bartschneider

Neueste Bedienungsanleitung für -Kategorien-