AS Synthesizers Interface AS901 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für AS Synthesizers Interface AS901 (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
BLOCK DIAGRAM OF
INTERFACE
AS901
MIXED SIGNAL MODULE
1
5
6
2 3 4
7
8 9
1. CV1 out, range: 0V to +10V
2. CV2 out, range: 0V to +10V
3. CV3 out, range: 0V to +10V or -5V to +5V
4. CV4 out, range: 0V to +10V or -5V to +5V
5. Digital outputs & indicators D1 to D8,
range: +5V TTL, pulse width: 2ms
6. Navigation buttons
7. 2x16 charaters LCD
8. MIDI indicator
9. USB MIDI indicator
PROGRAM CHANGE:
Using to fi nd the program you PGM/SEL
want to load in. Load: press YES
Do not load: press NO
SELECT MIDI SOURCE:
1. Press for 2 secSETUP
2. Choose MIDI source (MIDI or USB)
on Page 1 with using VALUE UP/DOWN
3. Leaving SETUP: press for 2 secEDIT/EXIT
EDIT PARAMETERS:
1. Entering EDIT menu: press EDIT/EXIT
for 2 sec
2. If in EDIT menu, press
to select outputsPGM/SEL UP/DOWN
3. Press PAGE LEFT/RIGHT to select
parameters of the outputs (CV1-4, D1-8)
4. Press VALUE UP/DOWN to change values
of the selected outputs
5. Exit from EDIT menu: press EDIT/EXIT
for 2 sec
6. Save: press SAVE for 2sec. use
to select thePGM/SEL UP/DOWN
number of the program you want to save
your settings into.
7. Save: press Don’t save: press YES, NO
8. If you don’t save the edited program,
you’ll see a star by the number of the
program. If you want to save, check 6.
FRONT PANEL OF
INTERFACE
AS901
MIXED SIGNAL MODULE
4
2
1
3
1. Power bus connector IDC10
2. MIDI & USB MIDI
IDC14, 2.54mm connector from
AS701 Audio & Midi Board
3. Factory programmer port
4. CV outputs to internal rails
5. Digital outputs to internal rails
Do not use jumpers on output
pins, also do not connect to ground or
power rails!
FIRMWARE UPGRADE:
1. Download INTERFACE fi rmware
from our website
2. Turn off your modular system
3. Connect USB cable to USB MIDI port on
AS701 Audio & MIDI board
4. Press and hold setup button, while
turning on your modular system
5. Module’s library appears in pop-up
window
6. Drag and drop downloaded fi le into
pop-up window
7. When upload is done turn off your
modular system.
8. Restart your modular system and enjoy
9. If upload process was unsuccessful,
repeat the whole procedure.
TECHNICAL SPECIFICATION
Module depth: 33mm
Module width: 16HP (80.4mm)
Module weight: 190g
Connector type: 10P IDC Eurorack
Power consumption:
+12V / 90mA & -12V / 10mA
Analog outputs: True Rail-to-Rail
Analog outputs range:
0V to +10V or -5V to +5V
Digital outputs range: 0V /+5V
Digital outputs pulse time: 2ms
when digital out is: Trig or MMC
BACK PANEL OF
INTERFACE
AS901
MIXED SIGNAL MODULE

Produktspezifikationen

Marke: AS Synthesizers
Kategorie: niet gecategoriseerd
Modell: Interface AS901

Brauchst du Hilfe?

Wenn Sie Hilfe mit AS Synthesizers Interface AS901 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd AS Synthesizers

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-