Aqara Presence Sensor FP2 Bedienungsanleitung
Aqara
Smarth home
Presence Sensor FP2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aqara Presence Sensor FP2 (23 Seiten) in der Kategorie Smarth home. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/23
Presence Sensor FP2 User Manual
Please read this manual carefully and keep it in a safe place.
The Presence Sensor FP2 features zone positioning, multi-person detection, and fall detection.
Capable of detecting presence or absence, falls, entries, exits, approach, departure, and
illuminance, it supports real-time tracking of multiple targets and zone settings. The FP2's
powerful features can also be used within third-party automation systems: multiple sensors are
exposed to HomeKit (and Home Assistant), Alexa, Google Home and more without needing a hub.
1. The fall detection results are for reference only. The product cannot fully replace medical devices
and may not accurately recognize slow tumbles or gradual falls while leaning against a wall.
Additionally, rapidly falling or shaking objects could trigger false fall detection alerts.
2. Avoid placing this product near a heat source.
3. Refrain from attempting self-repairs. All repairs should be conducted by professionals.
*This device requires to be used with the Aqara Home app.
*If local automation is needed, this product should be used with a Hub with Wi-Fi Local Automation features.
Product Introduction
Warnings
Sensor
Indicator LED, Light Sensor
Reset Button
USB-C to USB-A Cable
Base
Metal Plate
Sticker
Notice
Use of the Works with Apple badge means that an accessory has been designed to work specifically
with the technology identified in the badge and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
Device Discription
Actions Description LED indicator
Device
power-on
Press the Reset
button for more
than 10s
1. If the device had been connected to a
network previously, the LED indicator is
as shown on the right.
2. If the device is not connected to a
network, it enters the networking mode.
The yellow indicator flickers quickly: Enter
the networking mode.
The white indicator is normally on: Failure
to connect to the router/AIOT
The blue indicator flickers quickly: Connect
to the router
The blue indicator flickers slowly: Connect
to AIOT
No indicator is on: The device is connected
successfully, and can work normally.
Reset the device. Aî …er successful reset, the
device will be restarted automatically and
enter the networking mode.
The yellow indicator flickers quickly
Press the Reset
button for 10
times
successively
Restore factory settings and reset the device
to enter the networking mode. The yellow indicator flickers quickly
Produktspezifikationen
Marke: | Aqara |
Kategorie: | Smarth home |
Modell: | Presence Sensor FP2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Aqara Presence Sensor FP2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Smarth home Aqara
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
Bedienungsanleitung Smarth home
- Smarth home Acer
- Smarth home Hama
- Smarth home Nedis
- Smarth home NGS
- Smarth home Niceboy
- Smarth home Trust
- Smarth home Panasonic
- Smarth home Brennenstuhl
- Smarth home Bosch
- Smarth home Klarstein
- Smarth home Devolo
- Smarth home IKEA
- Smarth home Linksys
- Smarth home Alecto
- Smarth home Denver
- Smarth home EMOS
- Smarth home Gira
- Smarth home Renkforce
- Smarth home Blaupunkt
- Smarth home Krüger And Matz
- Smarth home Abus
- Smarth home Elro
- Smarth home EZVIZ
- Smarth home Imou
- Smarth home Smartwares
- Smarth home Ferguson
- Smarth home Gigaset
- Smarth home Perel
- Smarth home Nexa
- Smarth home Burg Wächter
- Smarth home Honeywell
- Smarth home TP-Link
- Smarth home Cleanmaxx
- Smarth home Netatmo
- Smarth home Inkbird
- Smarth home JUNG
- Smarth home Paulmann
- Smarth home FireAngel
- Smarth home Vivax
- Smarth home V-TAC
- Smarth home Gardena
- Smarth home Kogan
- Smarth home D-Link
- Smarth home EVOLVEO
- Smarth home Busch-Jaeger
- Smarth home SPC
- Smarth home Ring
- Smarth home Swann
- Smarth home LevelOne
- Smarth home Chuango
- Smarth home EQ-3
- Smarth home Delta Dore
- Smarth home Salus
- Smarth home Tenda
- Smarth home CyberPower
- Smarth home Intertechno
- Smarth home Reolink
- Smarth home Hikvision
- Smarth home Rain Bird
- Smarth home Oregon Scientific
- Smarth home Homematic IP
- Smarth home EQ3
- Smarth home DIO
- Smarth home Gossen Metrawatt
- Smarth home KlikaanKlikuit
- Smarth home Logicom
- Smarth home MAC
- Smarth home Nobo
- Smarth home SEC24
- Smarth home Hive
- Smarth home X-Sense
- Smarth home Sonoff
- Smarth home Shelly
- Smarth home Brilliant
- Smarth home Chacon
- Smarth home Fibaro
- Smarth home Aeotec
- Smarth home Tellur
- Smarth home Popp
- Smarth home Mach Power
- Smarth home Meross
- Smarth home SwitchBot
- Smarth home Casambi
- Smarth home TELE System
- Smarth home Winland
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
17 September 2024
16 September 2024
16 September 2024
15 September 2024
15 September 2024
Brennenstuhl BrematicPRO APWT868 01 IP44 Bedienungsanleitung
15 September 2024
13 September 2024
13 September 2024
13 September 2024