APC SMX48RMBP2U Bedienungsanleitung

APC Akku SMX48RMBP2U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC SMX48RMBP2U (6 Seiten) in der Kategorie Akku. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Installation Smart-UPSâ„¢
External Battery Pack SMX48RMBP2U
Inventory
Specifications
Operating Conditions
This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the
uninterruptible power supply (UPS), and the external battery pack (XLBP).
Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the specified
limits.
This unit has front and rear air vents. Allow adequate space for proper ventilation.
Environmental Specifications
Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short duration
discharges will shorten battery life.
For additional specifications, see the APC by Schneider Electric Web site at www.apc.com.
(1)
(1)
(4)
(4)
(1)
(2)
(4)
(4)
(1 pair) rails for
rack-mount installation
(1 pair) rack-mount brackets
(2)
Two Stabilizer brackets are included with the UPS.
(2)
Spacers to be used with the stabilizer brackets.
Temperature
Operating 0° to 40° C (32° to 104° F)
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity 0% to 95% relative humidity, non-condensing
Smart-UPS External Battery Pack SMX48RMBP2U2
Installation
• The UPS can support up to five XLBPs.
• Always install the XLBPs at the bottom of the rack with the UPS installed above the XLBPs.
• Connect all battery strings. Failure to do so may cause equipment damage.
Rack-mount to tower conversion
Two post rack
Front rack-mount
Center rack-mount
1 2 3
4 5
12
2
2
22
3
1 2
su0716 a
s
u0305a
s
u
0
0
4
4
9
a
su 0 44 8a
su0454a
su0356a
su0455a
su0456a
su0457a
Smart-UPS External Battery Pack SMX48RMBP2U 3
Four post rack
Use the APC Four-Post Rail Kit.
Install the bezel and rotate the logo if necessary
Connect the External Battery Packs
An optional battery extension cable is available from APC by Schneider Electric, see www.apc.com.
1 2
su0440a
su0459a
su0461a
s
u0462a
s
u0462a


Produktspezifikationen

Marke: APC
Kategorie: Akku
Modell: SMX48RMBP2U

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC SMX48RMBP2U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Akku APC

Bedienungsanleitung Akku

Neueste Bedienungsanleitung für -Kategorien-