Antec BP350P - EC Bedienungsanleitung
Antec
Computer-Netzteil
BP350P - EC
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antec BP350P - EC (3 Seiten) in der Kategorie Computer-Netzteil. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
Basiq
Models: BP350, BP350P
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
1
Antec Basiq User’s Manual
ATX12V version 2.01 power supply
Models: BP350/BP350P
Antec Basiq series power supplies are built to be compatible with the ATX12V
version 2.01 specification. They include dual 12V output circuitry that delivers
safer and more reliable output to your system’s components, as well as higher
energy efficiency, which reduces power consumption by up to 25%, saving you
money on your electricity bill. In addition we’ve included a variety of protective
circuitry: OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP
(Short Circuit Protection).
Passive Power Factor Correction (applicable only to models designed for sale in
the European Union): BP350P designed for the EU include Power Factor Correction
(PFC) circuitry in accordance with European standard regulation code EN61000-3-2.
Power Switch: This power supply comes with a main power switch. Make sure
you turn the switch to the ON ( I ) position before you boot up your computer for
the first time. In normal operation there is no need to turn the switch to the OFF
(O) position since the power supply is equipped with a soft on/off feature which
turns your computer on and off through the soft switch on your computer case.
You may need to turn the switch to the OFF position occasionally should your
computer crash and you cannot shut it down through use of the soft switch.
Installation:
1. Turn off the hard switch on your power supply if any.
2. Open your computer case. Follow the directions provided in your case manual.
3. Disconnect all power connectors from the motherboard and from the peripheral
devices such as case fans, hard drives, optical drives, floppy drives, etc.
4. Disconnect the power cord from your old power supply.
5. Remove the existing power supply from your computer case and replace it
with your new Antec power supply.
6. (NOT applicable to models designed for the European Union): Before you Note
install your new power supply, check the red power supply voltage switch
setting. It should match your local power voltage (115V for North America,
Japan, etc., 230V for Europe, South East Asia, and many other countries).
Change the voltage setting if necessary. If you use the wrong voltage setting,
you could damage your system and void your warranty.
7. Turn the hard switch on the Antec power supply to the OFF position and
connect the AC power cord to the power supply.
8. Connect the 24-pin Main Power Connector and the
4-pin +12V connector to your motherboard as
needed. If your motherboard uses a 20-pin connector;
detach the 4-pin attachment on the 24-pin power
connector, see pictures 1 and 2. : the detach-Note
able 4-pin section cannot be used in place of the 4-pin
+12V connector.
9. Connect the peripheral power connectors to devices such as hard drives,
optical drives, etc.
10. Connect the Serial ATA connectors if you are using Serial ATA hard drive.
11. Close your computer case.
Picture 1 Picture 2
Antec, Inc.
47900 Fremont Blvd.
Fremont, CA 94538
USA
tel: +1 510-770-1200
fax: +1 510-770-1288
Antec Europe B.V.
Sydneystraat 33
3047 BP Rotterdam
The Netherlands
tel: +31 (0) 10 462-2060
fax: +31 (0) 10 437-1752
Customer Support:
US & Canada
1-800-22ANTEC
customersupport@antec.com
Europe
+31 (0) 10 462-2060
europe.techsupport@antec.com
www.antec.com
© Copyright 2006 Antec, Inc. All rights reserved.
All trademarks are the property of their respective owners.
Reproduction in whole or in part without written permission is prohibited.
Printed in China.
Version 1.0.6 05/04/2006
Produktspezifikationen
| Marke: | Antec |
| Kategorie: | Computer-Netzteil |
| Modell: | BP350P - EC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Antec BP350P - EC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Computer-Netzteil Antec
4 September 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Computer-Netzteil
- Computer-Netzteil Approx
- Computer-Netzteil Corsair
- Computer-Netzteil Gigabyte
- Computer-Netzteil Sharkoon
- Computer-Netzteil Zalman
- Computer-Netzteil Fantec
- Computer-Netzteil LC-Power
- Computer-Netzteil MSI
- Computer-Netzteil Enermax
- Computer-Netzteil Adj
- Computer-Netzteil Cooler Master
- Computer-Netzteil SilverStone
- Computer-Netzteil Thermaltake
- Computer-Netzteil Be Quiet!
- Computer-Netzteil AZZA
- Computer-Netzteil APC
- Computer-Netzteil Akasa
- Computer-Netzteil StarTech.com
- Computer-Netzteil AeroCool
- Computer-Netzteil 3Com
- Computer-Netzteil Fractal Design
- Computer-Netzteil ENDORFY
- Computer-Netzteil Seasonic
- Computer-Netzteil Allied Telesis
- Computer-Netzteil Mini-Box
- Computer-Netzteil FSP
- Computer-Netzteil Edge-Core
- Computer-Netzteil Chieftec
- Computer-Netzteil CoolerMaster
Neueste Bedienungsanleitung für -Kategorien-
16 September 2024
12 September 2024
12 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024