American International NDK780 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für American International NDK780 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
NDK780 Mounting Kit
Nissan
2013-16 CITY EXPRESS
2013-16 FRONTIER
2015-16 JUKE
2015-16 NV
2013-15 NV200
2013-15 QUEST w/ base radio
2012-13 ROGUE
2014-15 ROGUE w/ base radio
2013-14 TITAN
2013-16 VESA
2014-16 VESA NOTE
2013-15 XTERRA
VEHICLE APPLICATIONS (With Oversize Radio).
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 02/16 PRINT Ver.02/16
SINGLE DIN w/POCKET KIT ASSEMBLY INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit.
2. Slide pocket into the rear on the ISO brackets and snap into bottom location.
3. Attach the factory metal mounting brackets to the rear left and right sides of the aftermarket
radio using (2)screws removed from the factory radio.
4. Place main frame of the NDK780 around the front of the aftermarket radio, then screw the ISO
brackets between the OEM metal mounting brackets and the aftermarket front screw locations
using the (2)screws removed from the factory radio.
5. Using the bolt and nut provided. Secure the bottom front right and left of the OEM metal
mounting brackets to the bottom of the NDK780 ISO brackets.
2
DOUBLE DIN KIT ASSEMBLY INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit.
2. Attach the factory metal mounting brackets to the rear left and right sides of the aftermarket
radio using (4)screws removed from the factory radio.
3. Place main frame of the NDK780 around the front of the aftermarket radio, then screw the
ISO brackets between the OEM metal mounting brackets and the aftermarket front screw
locations using the (4)screws removed from the factory radio.
IMB786 LEFT
IMB786 RIGHT
Fig A
Fig B IMB786 LEFT
IMB786 RIGHT
1. Starting from the front, carefully pry up on the top dash vent trim and pull forward
to remove.
2. Remove the (2) Phillips screws securing the top edge of the radio trim bezel.
3. Carefully pull the radio trim bezel forward, disconnect all attached harnesses from the back of
the radio trim bezel and remove trim bezel.
4. Remove the (4) Phillips screws securing the factory radio to the sub-dash.
5. Carefully pull the radio forward, disconnect all harnesses and antenna connector and
remove radio.
DASH DISASSEMBLY
2007-12 NISSAN VERSA HATCHBACK
2007-11 NISSAN VERSA SEDAN
3
1. Carefully pry forward and unclip the Radio/Vent trim bezel and then unplug the hazzard and
airbag light (do not turn key on once unplugged). Remove panel.
2. Remove the (4) Phillips screws securing the radio to the sub-dash
3. Pull the radio forward, disconnect all harnesses and antenna lead and remove radio.
DASH DISASSEMBLY
2012-14 NISSAN VERSA SEDAN / 2014 VERSA NOTE
1. Carefully remove the panel from the top of the radio.
2. Remove the (1) Phillips screw from the top of the Radio dash trim bezel.
3. Carefully lift upward from the bottom of the radio trim bezel, pull Radio trim bezel
forward and remove.
4. Remove the (2) Phillips screws securing the factory radio to the sub-dash.
5. Pull Radio forward, disconnect all harnesses and antenna lead from radio
and remove radio.
6. Remove the (4) Torx screws securing the factory radio to the dash panel.
DASH DISASSEMBLY
2013-14 NISSAN FRONTIER/XTERRA
DASH DISASSEMBLY
2013-14 NISSAN TITAN
1. Carefully remove the panel surrounding the radio and climate controls.
2. Remove the (4) Phillips screws securing the factory radio to the sub-dash.
3. Pull Radio forward, disconnect all harnesses and antenna lead from radio
and remove radio.
1. Using a panel removal tool, carefully pry the front edge of the center channel speaker
cover upward to unclip and remove from the top of the dash.
2. Remove the (4) Phillips screws securing the center channel speaker (If equipped).
3. Disconnect the center channel wire harness from the speaker and remove
speaker if equipped.
4. Carefully pry the lower side edge trim pieces from beside the Vent/Hazard assembly,
then using a panel removal tool from inside the center channel speaker area at the
top of the dash, slide the panel removal tool between the center channel speaker
mount surface, and the base beneath the center channel speaker mount surface and
pry upward on the Vent panel assembly, disconnect all harnesses from the rear of
the panel and remove assembly.
5. Using a panel removal tool, carefully pry the climate control panel forward
and lay out of the way.
6. Remove the (4) Phillips screws securing the radio to the sub-dash.
7. Carefully pull the radio forward, disconnect all wire harnesses and antenna lead
and remove radio.
DASH DISASSEMBLY
2011-13 NISSAN ROGUE


Produktspezifikationen

Marke: American International
Kategorie: Nicht kategorisiert
Modell: NDK780

Brauchst du Hilfe?

Wenn Sie Hilfe mit American International NDK780 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert American International

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-