American International HONK828 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für American International HONK828 (19 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 121 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/19
HONK828 Mounting Kit
Honda
1990-02 ACCORD
1999-00 CIVIC
2002-05 CIVIC SPECIAL EDITION
2006-12 CIVIC (see note below)
1997-06 CRV
2003-06 ELEMENT
2007-11 ELEMENT LX
1995-04 ODYSSEY
1989-01 PRELUDE
Izusu
1996-99 OASIS
VEHICLE APPLICATIONS
Acura
1997-99 CL
1990-01 INTEGRA
1986-96 LEGEND
1996-98 TL
1992-94 VIGOR *
*Note: This kit fits all vehicles with factory navigation radios or vehicles that do not come
with any factory radio. For vehicles that are equipped with the factory non-navigation
radios, part# HCB-8800/HCB8820 is required (sold seperately).
©2012 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 1/112PRINT Ver. 1/12
1
SINGLE DIN INSTALLATION
TOOLS REQUIRED:
A. Razor knife, or file (to cut or file the removed mounting tabs flush with the back
edge of the main bracket)
B. Pliers, or wire cutters (for mounting tab removal)
C. Phillips screwdriver (to attach side brackets to rear of pocket)
KIT PREPARATION:
1. Locate the HON-K828 main frame bracket.
2. Find the page that has the year and make of vehicle you are working on.
3. Locate the left and right side mounting brackets (if required) See example below.
4. Following the illustration on the page for your vehicle, remove all mounting tabs
from the main frame and file or trim flush with the rear edge of the main bracket.
5. Remove all mounting tabs from the left and right side brackets unless they are
lettered for your vehicle application.
6. Insert the left and right side brackets into the opening of the main frame as shown
in illustrations on page 4 and secure to rear of pocket with small screws supplied
with kit.
7. Insert DIN sleeve from your new radio into the radio opening of the installation kit.
8. Depress the tabs from inside the sleeves opening upward, outward, and downward to
secure sleeve to the installation kit.
Note: ISO trim ring (ITR-828) may not be useable on some DIN mount applications.
Example: radio’s with non-removable trim rings
KIT PREPARATION
IMB-828L
IMB-828R
*
Note: For best looking install, ISO mounting
is recommended whenever possible.
ATTENTION: See line #2 above for ALL vehicles
Vehicles below require brackets
IMB-828L&R for DIN and ISO
mount applications
Bracket set IRB-828L&R below are
also required for vehicles only
when ISO mounting radio.
1998-02 Honda Accord
2002-06 Honda CRV
2003-06 Honda Element
2007-11 Honda Element LX
1999-04 Honda Odyssey
2
SINGLE ISO INSTALLATION
TOOLS REQUIRED:
A. Razor knife, or file (to cut or file the removed mounting tabs flush with the back edge
of the main bracket)
B. Pliers, or wire cutters (for mounting tab removal)
C. Phillips screwdriver (to attach side brackets to rear of pocket & attach radio to brackets)
KIT PREPARATION
1. Follow steps 1-6 on page 2.
2. Set the front of the kit down on a clean work station.
3. Insert left and right ISO mount brackets (IMB-828L & IMB-828R) into rear of radio
opening and depress on to rails on top of pocket as shown in figure A and B below.
4. Insert IRB-828L and IRB-828R into rear edge of face of kit and secure to rear of
pocket using small screws supplied with kit. See figure B below.
5. Place the radio between the ISO mount brackets.
6. Using the screws provided (screws may have to be shortened so they do not touch
any internal components of radio) attach the radio to the side brackets loosely.
7. Set kit and radio upright and attach the ISO trim ring supplied with kit.
8. Adjust the radio forward for desired look and tighten mounting screws.
KIT PREPARATION
IRB-828L
ITR-828
ITR-828
IRB-828R
FIG. B
FIG. A
IRB-828L
IMB-828R
IMB-828L
(optional use)
ISO trim ring
(optional use)
ISO trim ring


Produktspezifikationen

Marke: American International
Kategorie: Nicht kategorisiert
Modell: HONK828

Brauchst du Hilfe?

Wenn Sie Hilfe mit American International HONK828 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert American International

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-