American International GMK461 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr American International GMK461 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
iGMK461
VEHICLE APPLICATION
Chevrolet
2018-19 Equinox
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
©2019 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 1/19 PRINT Ver. 1/19
GMK461 Mounting Kit
NOTE: The Sub Dash will need to be modiîšżed/trimmed to îšżt the radio chassis to allow room
for the aftermarket radio.
DASH DISASSEMBLY INSTRUCTIONS
1. Using a soft tool Unsnap the panel above the steering column, then unsnap and remove
the panel around the instrument cluster.
2. From the area now exposed around the instrument cluster remove (1) 9/32” screw,
then unsnap and remove the panel that extends from the instrument cluster to below the
radio/climate controls and across the passenger side dash .
3. From the area now exposed below the radio/climate controls remove (4) 9/32” screws ,
then unsnap and remove the panel, unplugging ant harnesses.
4. From the area now exposed behind the climate control panel, remove (2) 9/32” screws.
Unsnap and remove the radio, unplug any harnesses.
5. Remove (3) top clips from the radio. Save for kit installation.
NOTE: For models equipped with OnStar: You will need to relocate the module(s)
somewhere not a󰀨ecting the radio installation.
NOTE: The Sub Dash will need to be modiîšżed/trimmed to îšżt the radio chassis to allow
room for the aftermarket radio.
23
DOUBLE DIN INSTALLATION INSTRUCTIONS
Figure A
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Application
1. Install the (3) clips removed from the factory radio onto the 3 top post of the
GMK461 INNER FRAME.
2. Insert pocket into lower section of the brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides of
the radio using screws provided with radio when possible, or screws supplied with kit.
4. Using the OUTER FRAME of the GMK461 as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
5. Slide the radio with pocket and brackets into the GMK461 INNER FRAME
6. Insert the GMK461 OUTER FRAME over the radio/pocket.
7. Using the (6) screws provided, Install the OUTER FRAME to the rear of the
INNER FRAME and radio brackets.
Double DIN ISO Mount Application
See Fig B for bracket tab removal.
1. Install the (3) clips removed from the factory radio onto the 3 top post of the
GMK461 INNER FRAME.
2. Remove pocket support tabs from both brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides of
the radio using screws provided with radio when possible, or screws supplied with kit.
4. Using the OUTER FRAME of the GMK461 as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
5. Slide the radio and brackets into the GMK461 INNER FRAME
6. Insert the GMK461 OUTER FRAME over the radio.
7. Using the (6) screws provided, Install the OUTER FRAME to the rear of the
INNER FRAME and radio brackets.
Figure B
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)


Produktspezifikationen

Marke: American International
Kategorie: Nicht kategorisiert
Modell: GMK461

Brauchst du Hilfe?

Wenn Sie Hilfe mit American International GMK461 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert American International

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-