American International GMK315B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für American International GMK315B (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
iGMK315
Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
GMK315 Mounting Kit
CHEVROLET
2012-13 SONIC
VEHICLE APPLICATIONS
©2012 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 11/12 PRINT Ver. 11/12
DASH DISASSEMBLY AND RADIO REMOVAL
2 3
KIT ASSEMBLY INSTRUCTIONS
Note: This kit is an (ISO) mounting kit only. The mounting sleeve of your new radio
cannot be used when ISO mounting an aftermarket radio.
DO NOT attach the (4) OEM Panel metal clips yet.
1. Insert pocket into lower section of GMK315 panel, it will lock into place.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
3. Slide radio forward or backward for desired look and tighten screws.
4. You may use the trim ring supplied with you radio or the single din trim
included with the GMK315.
5. Test fit kit/radio by mounting it using the (4) OEM screws, and making sure the
main frame of the GMK315 aligns correctly and does not leave any gaps when
installed. If everything looks correct go to step #6. If not, go back to step # 3.
6. Snap OEM air vents from OEM panel into the GMK315 panel.
7. Attach the metal panel fastener clips (from OEM panel) (4) to the mounting tab on
the back side of the GMK315 panel.
8. Suggested…Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio.
Single ISO Mount Applications
Double DIN Mount Applications
DO NOT attach the (4) OEM Panel metal clips yet.
1. Insert ISO mountable radio between ISO mount brackets and loosely attach to
sides of radio using screws provided with radio when possible, or screws supplied
with kit.
2. Slide radio forward or backward for desired look and tighten screws.
3. You may use the trim ring supplied with you radio or the single din trim included
with the GMK315
4. Test fit kit/radio by mounting it using the (4) OEM screws, and making sure the
main frame of the GMK315 aligns correctly and does not leave any gaps when
installed. If everything looks correct go to step #5. If not, go back to step # 2.
5. Snap OEM air vents from OEM panel into the GMK315 panel.
6. Attach the metal panel fastener clips (from OEM panel) (4) to the mounting tab on
the back side of the GMK315 panel.
7. Suggested…Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio.
Fig A
Fig B
1. With a soft took remove OEM dash panel surrounding the radio, including air vents.
Note: if panel seems difficult to remove you can remove the glove box and push on
the bottom right tab on the panel to help loosen.
2. Remove (4) 7mm Hex Head Screw. Remove radio and unplug all harnesses and
antenna connections.
3. Remove OEM air vents to be used on the GMK315 panel.


Produktspezifikationen

Marke: American International
Kategorie: Nicht kategorisiert
Modell: GMK315B

Brauchst du Hilfe?

Wenn Sie Hilfe mit American International GMK315B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert American International

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-