ADDAC System ADDAC210 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr ADDAC System ADDAC210 (14 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
ADDAC210 OPEN HEART SURGERY USER’S GUIDE
August.2014Revision.01
Welcome to:
3. DICLAIMER & REMARKS ON SAFETY
4. OVERVIEW
5. POWER DIAGRAM
6. POWER SWITCH AND MONITOR LEDS
7. POTENTIOMETERS
8. SWITCHES & PHOTOCELL
9. JACKS
10. LEDS
11. HARDWARE SETTINGS
12. ARDUINO COMPATIBILLITY
13. FRONTPANEL
INDEX
page 3ADDAC SYSTEM
ADDAC210 OPEN HEART SURGERY USER’S GUIDE
DISCLAIMER
We do not take any responsibility and we are not liable for any damage caused while using this module, be
it indirect, special, incidental or consequential damages (including but not limited to damages to power
supplies, other modules, personal computers or to the module itself).
Use it at your own responsability!
REMARKS ON SAFETY
(For the electronic enthusiast)
There are a few things to be very aware while using this module, will try to put it simple here, bottom line is
if you’re not sure of what you’re doing s#!t will happen, but don’t despair s#it will also happen when you
think you know what you’re doing!
However, this means that when something is not right, best case scenario, your circuit is somehow faulty and
it simply doens’t work or, worst case scenario, your circuit is faulty, it won’t work but it will also create some
sort of “short circuit” that will carry a high load through the module and demand a higher current from the
PSU to where it’s connected. This doesn’t mean that all mistakes will be short circuits, but this is the worst
case scenario walkthrough.
When a short circuit happens, all the load goes through the components in the circuit and ultimately will
drain the PSU to it’s limits. Depending on the PSU you may have diferent things will happen.
Our PSUs, being good quality switching PSUs, offer short circuit and over-current protection and they will
simply shutdown until the short circuit is removed. On the other hand, if working with Toroidal PSUs they will
drop they’re operating voltage and provide as much current as they physically can, this can be harmfull for
other modules connected in the same PSU as well as to the PSU itself.
So, how can we be safe at all times?
Simple, make "no" mistakes! Easy right? From experience most times i learned "The" lesson was when i
burnt/busted/broke/smoked something. Most of those times i wasn’t too focused either, so never be careless,
always try to be thinking ahead preventing "catastrophes" from happening.
So if you're stepping into electronics for the first times, be very aware at all times, keep one hand close to
the off switch! And keep an eye on the status leds, specially when making new circuit connections and at
power ups!
Be aware of board and components temperature, first sign of bad circuit design is heat, if something is
heating up than most probably it will burn out soon, raise your nose awareness up, although things normally
start to smell funny a bit too late, and if you see smoke than that part is already gone for good.
If you're learning the arduino platform by it’s own or working solely on the arduino side, keep the open heart
disconnected from the modular, you can safely work with the usb power and avoid other mistakes.
August.2014Revision.01


Produktspezifikationen

Marke: ADDAC System
Kategorie: Nicht kategorisiert
Modell: ADDAC210

Brauchst du Hilfe?

Wenn Sie Hilfe mit ADDAC System ADDAC210 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ADDAC System

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-