Adastra LS26 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra LS26 (4 Seiten) in der Kategorie Mischpult. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
LS26
Line Splitter 1:12 / 2:6
Item ref: 953.022 UK
User Manual
Version 2 .0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.022 User Manual UK
Introduction
Thank you for choosing the Adastra LS26 line splitter for your audio system. Please read this manual
to gain the best results from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids enter the housing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the
case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service – –
personnel.
Safety
This product is powered directly from the mains supply and should only be fitted by a qualified
electrical installer.
Placement
The LS26 is designed to be installed free-standing or in a standard rack. 19
Ensure that no heavy items are placed on top of the LS26, which may cause damage to the unit.
Cleaning
Use a soft cloth with a neutral detergent to clean the housing as required.
Do not use solvents for cleaning the unit.
953.022 User Manual UK
Front Panel
1. 12) CHANNEL B volume controls (7
2. SIGNAL B input clip indicator
3. MONO / STEREO mode indicators
4. SIGNAL A input clip indicator
5. 6) CHANNEL A volume controls (1
Rear Panel
6. CHANNEL A outputs 1 6 (6.3mm jack)
7. INPUT A (6.3mm jack)
8. MONO / STEREO mode switch
9. INPUT B (6.3mm jack)
10. CHANNEL B outputs 7 12 (6.3mm jack)
11. IEC mains inlet & fuse
12. Mains voltage selector
Applications
The LS26 is a signal distribution tool which can be used to split either 2 mono signals into 6 copies of
each or a single mono signal into 12 copies of the original. These are boosted back up to line – –
level and each given a volume control.
Applications for this function include
Zone level control for a venue with many rooms fed from the same stereo sound source (12
rooms for mono or 6 for stereo)
Multi-amplifier signal distribution where amplifiers have no signal-through facility.
Speech distribution to headphone amplifiers for interpreters/transcribers in conference
situations.
Multi-level parallel processing in a studio scenario where several copies of the original are
sent to various signal processors.


Produktspezifikationen

Marke: Adastra
Kategorie: Mischpult
Modell: LS26

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra LS26 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischpult Adastra

Bedienungsanleitung Mischpult

Neueste Bedienungsanleitung für -Kategorien-