ZTE MF62 Bedienungsanleitung

ZTE Mobiltelefon MF62

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZTE MF62 (3 Seiten) in der Kategorie Mobiltelefon. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

ZTE MF62

User Manual

2 4 5 6 73 8 9

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn

Introduction

ZTE MF62 is a 3G/2G mobile hotspot device, working in GSM/GPRS/

EDGE/WCDMA/HSPA/HSPA+ network. The client devices could connect to

it via USB or Wi-Fi interface. The device supports data and SMS services,

enabling you to communicate anytime and anywhere.

This manual provides instructions on how to install and get started with the

product. For information about connection of services, please consult your

service provider.

Specication

Data Service

HSPA+: DL 21.6Mbps,

UL 5.76Mbps

WCDMA CS: 64kbps UL/DL

WCDMA PS: 384kbps UL/DL

Interface USB and Wi-Fi

Wi-Fi Standard 802.11b/g

Wi-Fi Security WEP/WPA/WPA2

USB Version USB 2.0 HIGH SPEED

USB Interface Type Micro USB

Weight 86g

Dimensions (W×H×D): 99.6mm*54mm*14.6mm

microSD card Support up to 32GB microSD card

Power Adapter 5V/700mA

Battery 1500mAh

*Standby time 100hours

*Working time 4hours

Operate system Windo ws 7, Windows Vista(32bit o r 6 4bit ),

Windows XP (SP2 or later), MAC (10.4 or later)

Web Browser IE (7.0 or later), Firefox (2.0 or later), Opera (10.0

or later), Safari (4.0 or later), Chrome (5.0 or later)

Operating temperature 0ºC ~ +35ºC

Storage temperature -20ºC ~ +50ºC

Charging temperature 0ºC ~ +45ºC

Humidity 5%~ 95%

Notes:

microSD is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for your

reference. The actual device may be different.

Right Side Front Left Side Bottom

Interface and Buttons

1. Power Hold the button to switch on/off the device.Power

2. Memory card slot

(microSD card)

It is where you insert the memory card (microSD

card).

3. WPS

This button is used to start/end Wi-Fi Protected

Setup authentication process and enable/disable

the Wi-Fi function.

• Hold it for 3 seconds to activate the WPS

function.

• When the WPS function is available, press it to

deactivate the WPS function.

• Press it to enable/disable Wi-Fi function.

4. LED Screen It indicates the signal type, signal strength, battery,

Wi-Fi, etc.

5. External Antenna

Connector

It is used to connect an external antenna to

enhance the signal strength.

6. Charger/USB port • Charge your device.

• Connect the client to your device via USB cable.

Notes:

• Hold the WPS Power and buttons simultaneously until the LED

screen turns off, and then release the buttons. The device will restart

automatically and restore to the factory default settings.

• Please use the original external antenna if necessary.

LED Indicator

When the device is powered on, the following icons will appear on the LED

screen, with the corresponding indicates listed in the table below:

Icon Indication

Network signal strength.

Network type. 2G or 3G icon will appear on the LED

screen according to the network being connected.

Connect to the Internet automatically.

Connect to the Internet manually.

Roaming network indication.

New message received.

Wi-Fi Status and number of the connecting users.

Battery power indication.

Hardware Installation

Inserting SIM Card and Battery

1. Slide the back cover and remove it.

2. Insert the SIM card into the SIM card holder.

3. Insert the battery as shown with the contacts located against the metal

springs, and press the battery down into the case.

4. Slide the back cover and lock the cover in its place.

Inserting microSD Card

1. Pull the microSD cover out of the card slot.

Notes:

Do not pull the cover rudely, as it is connected with the device.

2. Insert the microSD card into the microSD slot. The following picture

shows the correct inserting direction. You will hear a click when the

microSD card locks in place.

3. Close the microSD cover.

Switching On/Off Your Device

Hold the button to switch on/off the device.Power

Notes:

The device is powered on when the LED screen lights up.

Charging Your Device

You can charge your device by using USB cable or adapter.

1. Insert the charger lead carefully.

2. The plug only ts one way. Do not use excessive force to insert the plug.

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including

photocopying and microfilm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.0

Establish a connection between your device and

the client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation.

Notes:

• If the system does not launch installation automatically, you can run the

installation program in path of My Computer > Mobile Hotspot.

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on your

desktop and a program group in the Mobile Hotspot Start→Programs

menu. The connection between your device and the client will be

established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search the available

wireless network.

Notes:

You need to check your Wireless Network Connection. Set the client

to obtain an IP address automatically in the Internet protocol (TCP/IP)

properties, and the client will get an IP address like “192.168.0.100”.

Working Mode

Your device supports three working modes. For the client, we only use PC or

laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Mixed Mode: Connect to the device with the above two connection methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure that

the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices can

surf on the Internet at the same time.

10 12 13 14 15 16 17 1811

PIN Code Verication

If the PIN code of your SIM card is enabled, you will need to input the PIN

code when you login at the rst time.

Notes:

The SIM card will be locked if you enter wrong PIN code consecutively for

three times.

If you want to modify the PIN Status, please select Settings > Advanced >

PIN Manage to do the actions.

Quick Settings

After logging in, select , and then the Quick Setup wizard Quick Setup

appears.

The Quick Settings wizard guides you how to set the basic parameters for

your device in the safest way. After this procedure, you can use your Internet

service.

Notes:

The parameter settings may have been preset by your service provider,

and you will enjoy your Internet service directly. Please contact your service

provider for details if you want to do some modication.

WAN Connection

After logging in, select WAN Connection, and you can choose the WAN

Connection Mode according to your requirement.

Settings

After logging in, select and you can do the following operations. Settings,

Select Settings >

3G Settings

View the Wireless Information, select Band Selection

Mode and change APN Setting.

Select Settings >

Wi-Fi Settings

View the current station list, change the basic wireless

network settings, choose security mode and WPA type,

and perform the WPS conguration.

Select Settings >

Firewall

Set the Mac/IP/Port Filtering, Port Forwarding or the

System Security conguration.

Select Settings >

Advanced

View the current status of your device, change the

Administrator Settings, restore factory defaults, manage

PIN or set the LAN interface conguration.

Notes:

Make sure that you can remember the new password if you change the

restore the device to the factory default settings in case you forget the new

password.

• Operating your device may interfere with medical devices like hearing

aids and pacemakers. Please always keep them more than 20

centimeters away from such medical devices when they are turned

on. Turn your device off if necessary. Consult a physician or the

manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places such

as oil warehouses or chemical factories, where there are explosive gases

or explosive products being processed. Turn off your device if required.

• The use of electronic transmitting devices is forbidden in aircrafts, at

petrol stations and in hospitals. Please observe and obey all warning

signs and switch off your device in these conditions.

• Do not touch the inner antenna area if not necessary. Otherwise it will

affect your device’s performance.

• Store your device out of the reach of little children. Your device may

cause injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn,

when your device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using

any unauthorized accessories may affect your device’s performance, and

violate related national regulations about telecom terminals.

• Avoid using your device near or inside metallic structures or

establishments that can emit electromagnetic waves. Otherwise it may

inuence signal reception.

• Your device is not waterproof. Please keep it dry and store in a shady

and cool place.

• Do not use your device immediately after a sudden temperature change.

In such case, it will produce dew inside and outside your device, so don’t

use it until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it. Otherwise

your device will be damaged.

• No dismantling by non-professionals and only qualied technicians can

undertake repair work.

3. Select the SSID of your device, and then click Connect. The following

gure is only for your reference.

Notes:

There will be a pop-up window to require the password. Check the label

on your device to gain the SSID and preset password information. Please

do remember the new password when you change the password by

selecting Settings > Wi-Fi Settings > Security after logging in the WebGUI

Conguration Page. You can restore the device to the factory default settings

in case you forget it.

4. Wait a moment, the connection between your device and the client will

be established successfully.

Access the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet in the

Always On Manual Always On. and mode. The default mode is

Notes:

You can browse the WebGUI Conguration page and click WAN Connection

to set the WAN connection mode.

Disconnect from the Internet

1. Log in the WebGUI Conguration page, and select WAN Connection.

2. Select Manual > Disconnect Internet.

3. Click Apply.

Notes:

Turning off the device can also terminate the internet connection.

SMS

This function allows you to view, send and receive short messages.

After logging in, select , and you can do the following operations.SMS

Select Operate the SMS in your device.SMS > Device

Select Operate the SMS in your SIM card.SMS > SIM Card

Select Send or save SMS.SMS > New Message

Select SMS > SMS Settings Set the SMS conguration.

PhoneBook

This function allows you to store contacts to your device or SIM card.

After logging in, select , and you can add a new contact in PhoneBook Add

New Device tab, and perform operations to the contact in the or SIM Card

tab.

• Operating temperature range of 0ºC ~ +35ºC and humidity range of

5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat and

re.

• Do not store battery in hot areas or dispose of it in a fire to avoid

explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from your device

and store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed

recycle place. Do not put it in familial rubbish.

Warning:

If the battery is broken, keep away from it. If it taints your skin, wash your

skin with abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product caused

by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or

maintenance instructions or procedures.

iii. End User’s mishandling, misuse, negligence, or improper installation,

disassembly, storage, servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified

individual.

v. Power failures, surges, re, ood, accidents, actions of third parties

or other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party

products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the

Product.

Access the WebGUI Conguration Page

1. Make sure the connection between your device and the client is correct.

2. Launch the internet browser and enter http://192.168.0.1 or http://ufi.

home in the address bar.

Notes:

It is recommended that you use IE (7.0 or later), Firefox (2.0 or later), Opera

(10.0 or later), Safari (4.0 or later), Chrome (5.0 or later).

3. The login page appears as follows. The following gure is only for your

reference.

View the information of WAN, WLAN and Device. Input the case-sensitive

default password “ ”, and then click to access the WebGUI admin Login

Conguration page.

Notes:

• Do not put anything on the top of your device. Do not lay devices to

overlap each other when using.

• The device takes 1~2 minutes to initialize, and attach to the network.

Usage of WPS

If your client device supports WPS, you need not to input the password

manually after WPS has been available. Please do the following:

1. Start up your device.

2. Launch the client device connected to your device.

3. Enable the WPS function of your device.

4. Enable the WPS function of the client.

Notes:

• If the current security mode of the device is OPEN SHARE or , the WPS

function is useless.

• For the detailed operations about the client, please refer to the client’s

instruction.

Sleep Mode

When you enable the Wi-Fi function and use the battery to supply power

to the device, once no user connects to the device within 10 minutes or

you press the button, the device will enter the sleep mode, and the WPS

LED screen will be turned off. In the sleep mode, the Wi-Fi function will be

disabled. Press or button to wake up the device, and the LED Power WPS

screen will be turned on.

Notes:

With USB connection if no Wi-Fi user connects to the device within 10

minutes, only the Wi-Fi function will be disabled. Hold the button about WPS

3 seconds to enable this function.

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromagnetic interference

sent by your device if inadequately shielded, such as the electronic

system of vehicles. Please consult the manufacturer of your device

before using if necessary.

End User shall have no right to reject or return the Product, or receive a

refund for the Product from ZTE under the above-mentioned situations.

• This warranty is End User’s sole remedy and ZTE’s sole liability for

defective or nonconforming items, and is in lieu of all other warranties,

expressed, implied or statutory, including but not limited to the implied

warranties of merchantability and tness for a particular purpose, unless

otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of prots or indirect, special, incidental or

consequential damages resulting from or arising out of or in connection with

using of this product, whether or not ZTE had been advised, knew or should

have known of the possibility of such damages, including, but not limited to

lost prots, interruption of business, cost of capital, cost of substitute facilities

or product, or any downtime cost.

How to Get Help

You can get help by:

• Sending E-mail to mobile@zte.com.cn

• Visiting http://www.zte.com.cn

• Calling Service Hotline: +86–755–26779999

Produktspezifikationen

Marke:	ZTE
Kategorie:	Mobiltelefon
Modell:	MF62

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZTE MF62 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mobiltelefon ZTE

ZTE MF61 Bedienungsanleitung

1 September 2024

ZTE Solar Bedienungsanleitung

22 August 2024

ZTE N-860 Bedienungsanleitung

14 August 2024

ZTE T-165 plus Bedienungsanleitung

10 August 2024

ZTE Grand X Max Bedienungsanleitung

10 August 2024

ZTE Altair 2 Bedienungsanleitung

5 August 2024

ZTE Telstra T95 Bedienungsanleitung

5 August 2024

ZTE Skate Kis Bedienungsanleitung

5 August 2024

ZTE S510 Bedienungsanleitung

4 August 2024

ZTE San Francisco II Bedienungsanleitung

3 August 2024

Bedienungsanleitung Mobiltelefon

Neueste Bedienungsanleitung für -Kategorien-

Lava Iris 550Q Bedienungsanleitung

6 Oktober 2024

NEC N412I Bedienungsanleitung

5 Oktober 2024

Alcatel One Touch 305 Bedienungsanleitung

24 September 2024

Lenovo A390 Bedienungsanleitung

18 September 2024

Alcatel One Touch C630 Bedienungsanleitung

17 September 2024

Alcatel One Touch 799 Bedienungsanleitung

16 September 2024

Lava Iris 354e Bedienungsanleitung

16 September 2024

Lava Iris fuel 50 Bedienungsanleitung

15 September 2024

Logicom L-195 Bedienungsanleitung

14 September 2024

Bixolon SPP-L410 Bedienungsanleitung

9 September 2024