ZTE MF51 Bedienungsanleitung

ZTE Mobiltelefon MF51

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZTE MF51 (3 Seiten) in der Kategorie Mobiltelefon. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

ZTE MF51

Quick Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in

any form or by any means, electronic or mechanical, including photocopying and

microlm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.0

Edition Time: 2012-01

Manual No: 079584504098

Introduction

ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA

network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to

communicate anytime and anywhere.

Specication

Data Service

HSPA:

DL 14.4 Mbps

UL 5.76 Mbps

WCDMA CS: UL 64 kbps/DL 64kbps

WCDMA PS: UL 384 kbps/DL 384kbps

Interface USB and Wi-Fi

Wi-Fi Standard 802.11b/g/n

Wi-Fi Security WEP/WPA/WPA2

USB Version USB 2.0 HIGH SPEED

USB Interface Type Micro USB

Weight 80 g

Dimensions (W×H×D): 102.5 mm*51 mm*13.5 mm

microSD card Support up to 32 GB microSD card

Battery 1500mAh Li-ion battery

*Standby time 100 hours

*Working time 4 hours

Charge time 3 hours

Operate system Windows 7, Windows Vista, Windows XP (SP2 or later),

Mac OS (10.5 or later)

Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or

later), Safari (4.0 or later), Chrome (10.0 or later)

Working temperature -10 °C ~ +60°C

Storage temperature -20 °C ~ +70 °C

Charging temperature 0 °C ~ +40 °C

Humidity 5%~ 95%

Notes:

microSD is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and based on

ideal working environment.

Getting to Know Your Device

The following figure shows the appearance of the device. It is only for your

reference. The actual device may be different.

Interface and Buttons

1. WPS

This button is used to start Wi-Fi Protected Setup authentication

process and enable/disable the Wi-Fi function.

• Hold it for about ve seconds to activate the WPS process.

• Hold it for about two seconds to enable/disable Wi-Fi function.

2. Charger/

USB port

• Charge your device.

• Connect the client to your device via USB cable.

3. Power Hold the button to switch on/off the device.Power

4. Indicators Indicates the status of your device.

Notes:

• Press and buttons simultaneously, and hold on about three WPS Power

seconds until all LEDs are off, then release the buttons, the device will restart

automatically and restore to the factory default settings.

Indicators

When the device is powered on, the following icons will light, with the corresponding

indications listed in the table below:

Indicators Status Description

Battery

Indication

RED glittering Please charge.

RED bright The voltage of battery is low.

GREEN bright

The voltage of battery is high.

Fully charged when power on or standby mode

with USB cable.

GREEN glittering Charging when power on or power off or standby

mode.

LED off

Under power off mode full charged with USB

cable or no charging

No charging or fully charged under standby

mode without USB cable

No battery

Wi-Fi

Indication

BLUE glittering Wi-Fi is active.

BLUE bright WPS is active.

LED off Wi-Fi is inactive or standby mode.

Network

Indication

BLUE glittering 2G Modem data transferring.

BLUE bright Register on 2G network.

GREEN glittering 3G Modem data transferring.

GREEN bright Register on 3G network.

RED bright ERROR or NO network service or No SIM

LED off Standby mode.

Hardware Installation

Inserting SIM Card, Memory Card and Battery

1. Use the thumb catch on the device to open the battery cover.

2. Insert SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter before

removing or inserting the SIM card, if not, the device or SIM card may be damaged.

3. Insert the memory card into the memory card holder.

4. Insert the battery as shown with the contacts located against the gold springs.

5. Line the battery cover up correctly and press gently to close the case.

Switching On/Off Your Device

Press and hold the button to switch on/off the device. Power

Notes:

Please install battery before power on.

Charging Your Device

1. Insert the charger lead carefully with the correct orientation to the charger port.

The plug only ts one way. Do not use excessive force to insert the plug.

2. Connect the charger to a main socket.

3. Disconnect when the battery is fully charged.

Working Mode

Your device supports three working modes. For the client, we only use PC or laptop

as the example in this document.

USB Mode: Connect the device to your PC or laptop via the included USB cable,

then power on your device. And the following picture is one application example:

Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop

via Wi-Fi. And the following picture is one application example:

Mixed Mode: Connect to the device with the above two connection methods.

The following picture is the application example. All of the client devices can surf on

the Internet at the same time.

1 2 4 5 6 73 8 9

Establish a connection between your device and

the client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Install software.

After the installation, the connection between your device and the client will be

established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-

Fi status icon will light.

2. If the Wi-Fi status shown is blue bright or LED off, hold the WPS key for about

2 seconds to enable the Wi-Fi function.

3. Use your normal Wi-Fi application on the client to search the available wireless

network.

Notes: You need to check your Wireless Network Connection. Set the client to

obtain an IP address automatically in the Internet protocol (TCP/IP) properties,

and the client will get an IP address like”192.168.0.101”.

4. Select the SSID of your device, and then click .Connect

4. Input the case-sensitive default password “ admin”, and then click to Login

access the WebGUI Conguration page.

Click to return to the login page.Logout

Click to access or disconnect from the Internet.Connect/ Disconnect

Click , ZTE Corporation ZTE Light Tab Weather, , Twitter, , or Facebook YouTube

to access the predefined link, for the detailed information please consult you

service provider.

Notes:

• Do not put anything on the top of your device. Do not lay devices to overlap

each other when using.

• The device takes 1~2 minutes to initialize, and attach to the network.

PIN Code Verication

If the PIN code of your SIM card is enabled, you will need to input the PIN code

when you login at the rst time.

Notes:

The SIM card will be locked if you enter wrong PIN code consecutively for three

times.

If you want to modify the PIN Status, please select Settings > Advanced > PIN

Manage > Modify PIN to do the actions.

Usage of WPS

If your client device supports WPS, you need not to input the password manually

after WPS has been available. Please do the following:

1. Start up your device.

2. Launch the client device connected to your device.

3. Enable the WPS function of your device.

4. Enable the WPS function of the client.

Notes:

For the detailed operations about the client, please refer to the client’s instruction.

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromagnetic interference

sent by your device if inadequately shielded, such as the electronic system

of vehicles. Please consult the manufacturer of your device before using if

necessary.

• Operating of laptop and desktop PCs and your device may interfere with

medical devices like hearing aids and pacemakers. Please always keep

them more than 20 centimeters away from such medical devices when they

are turned on. Turn your device off if necessary. Consult a physician or the

manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places such as

oil warehouses or chemical factories, where there are explosive gases or

explosive products being processed. Turn off your device if required.

• The use of electronic transmitting devices is forbidden in aircrafts, at petrol

stations and in hospitals. Please observe and obey all warning signs and

switch off your device in these conditions.

• Do not touch the inner antenna area if not necessary. Otherwise it will affect

your device’s performance.

• Store your device out of the reach of little children. Your device may cause

injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn, when your

device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using any

unauthorized accessories may affect your device’s performance, and violate

related national regulations about telecom terminals.

• Avoid using your device near or inside metallic structures or establishments

that can emit electromagnetic waves. Otherwise it may influence signal

reception.

• Your device is not waterproof. Please keep it dry and store in a shady and cool

place.

• Do not use your device immediately after a sudden temperature change. In

such case, it will produce dew inside and outside your device, so don’t use it

until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it. Otherwise your

device will be damaged.

• No dismantling by non-professionals and only qualified technicians can

undertake repair work.

• Operating temperature range of -10 °C ~ +60 °C and humidity range of

5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat and re.

• Do not store battery in hot areas or dispose of it in a re to avoid explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from the device and

store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed recycle

place. Do not put it in familial rubbish.

Warning:

If the battery is broken, keep away from it. If it taints your skin, wash your skin with

abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or maintenance

instructions or procedures.

10 11 12 13 14 15 16 17 18

Notes:

There will be a pop-up window to require the password. Please check the label

on the battery compartment of your device to gain the SSID and preset password

information.

5. Wait a moment, the connection between your device and the client will be

established successfully.

Access the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet in the

Always On Manual Always On or mode. The default mode is .

Notes:

You can browse the WebGUI Configuration page and select Settings > 3G

Settings > Network Select to set the WAN connection mode.

Access the WebGUI Conguration Page

1. Make sure the connection between your device and the client is correct.

2. Launch the internet browser and enter http://192.168.0.1 or http://u.home in

the address bar, or double to launch the internet browser.

Notes:

It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0

or later), Safari (4.0 or later), Chrome (10.0 or later).

3. The login page appears as follows.

Network Select

After logging in, select , and you can do Settings > 3G Settings > Network Select

the following operations.

WAN Connection Mode Set the WAN connection mode.

Band Selection Mode Set the Band connection mode.

Settings

After logging in, select , and you can do the following operations.Settings

Select Settings > Quick

Setup

The Quick Settings wizard guides you how to set the

basic parameters for your device in the safest way.

Select Settings > 3G

Settings

Select the network Mode and set the APN related

parameter.

Select Settings > Wi-Fi

Settings Set the Wi-Fi related parameters.

Select Settings > USSD This function allows you to inactive with the service

provider.

Select Settings > STK Show some services which your (U)SIM card

provides

Select Settings >

Advanced

View the current status of your device, change the

Administrator Settings, restore factory defaults,

manage PIN, set the LAN interface conguration, or

Update the device.

Select Settings > Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the

System Security conguration.

Notes:

Make sure that you can remember the new password if you change the login

password by selecting . Please restore the Settings > Advanced >PIN Manage

device to the factory default settings in case you forget the new password.

iii. End User’s mishandling, misuse, negligence, or improper installation,

disassembly, storage, servicing or operation of the Product.

iv. Modications or repairs not made by ZTE or a ZTE-certied individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or

other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party

products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the

Product.

End User shall have no right to reject or return the Product, or receive a refund for

the Product from ZTE under the above-mentioned situations.

• This warranty is End User’s sole remedy and ZTE’s sole liability for defective

or nonconforming items, and is in lieu of all other warranties, expressed,

implied or statutory, including but not limited to the implied warranties of

merchantability and tness for a particular purpose, unless otherwise required

under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or

consequential damages resulting from or arising out of or in connection with

using of this product, whether or not ZTE had been advised, knew or should have

known of the possibility of such damages, including, but not limited to lost prots,

interruption of business, cost of capital, cost of substitute facilities or product, or

any downtime cost.

How to Get Help

You can get Help by:

• Sending E-mail to mobile@zte.com.cn

• Visiting http://www.zte.com.cn

• Calling Service Hotline: +86–755–26779999

SMS

This function allows you to view, send and receive short messages.

After logging in, select , and you can do the following operations.SMS

Select Send or save SMS.SMS > New Message

Select Operate the SMS in your device.SMS > Device

Select Operate the SMS in your SIM card.SMS > SIM Card

Select SMS > SMS Settings Set the SMS conguration.

PhoneBook

This function allows you to store contacts to your device or SIM card.

After logging in, select , and you can add a new contact by clicking the PhoneBook

Add New Device tab, and perform operations to the contacts in the or SIM Card

tab.

Status

After logging in, select , and you can do the following operations.Status

Select Status >Basic

Status View the 3G Wireless Information and system info.

Select Status >

Network Status View the WAN, LAN, and WLAN information.

microSD Card

Use microSD Card

1. Install the microSD card into the device.

2. Connect the device with your PC or laptop using the provided USB cable, after

a while the system will display it as a removable disk.

3. Use it freely.

Disconnect from the Internet

1. In the WebGUI Conguration page, click the icon.

2. Click Disconnect icon to disconnect the device from the Internet.

Notes: Turning off the device can also terminate the Internet connection.

Standby Mode

• After powering your device on without USB connection, once no user connects

to the device within 10 minutes and no action is performed to the device, or the

WPS button is pressed manually, the device will enter the standby mode with

the screen off. In the standby mode, the Wi-Fi function will be disabled.

• With USB connection, once no user connects to the device within 10 minutes

and no action is performed to the device, or the WPS button is pressed

manually, the Wi-Fi function will be disabled, and then unplug the USB cable,

the device will enter the standby mode.

In the standby mode, press any button or connect your device and PC with the

USB cable to wake up the device, and the screen will be turned on.

Produktspezifikationen

Marke:	ZTE
Kategorie:	Mobiltelefon
Modell:	MF51

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZTE MF51 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mobiltelefon ZTE

ZTE MF61 Bedienungsanleitung

1 September 2024

ZTE Solar Bedienungsanleitung

22 August 2024

ZTE N-860 Bedienungsanleitung

14 August 2024

ZTE T-165 plus Bedienungsanleitung

10 August 2024

ZTE Grand X Max Bedienungsanleitung

10 August 2024

ZTE Altair 2 Bedienungsanleitung

5 August 2024

ZTE Telstra T95 Bedienungsanleitung

5 August 2024

ZTE Skate Kis Bedienungsanleitung

5 August 2024

ZTE S510 Bedienungsanleitung

4 August 2024

ZTE San Francisco II Bedienungsanleitung

3 August 2024

Bedienungsanleitung Mobiltelefon

Neueste Bedienungsanleitung für -Kategorien-

Lava Iris 550Q Bedienungsanleitung

6 Oktober 2024

NEC N412I Bedienungsanleitung

5 Oktober 2024

Alcatel One Touch 305 Bedienungsanleitung

24 September 2024

Lenovo A390 Bedienungsanleitung

18 September 2024

Alcatel One Touch C630 Bedienungsanleitung

17 September 2024

Alcatel One Touch 799 Bedienungsanleitung

16 September 2024

Lava Iris 354e Bedienungsanleitung

16 September 2024

Lava Iris fuel 50 Bedienungsanleitung

15 September 2024

Logicom L-195 Bedienungsanleitung

14 September 2024

Bixolon SPP-L410 Bedienungsanleitung

9 September 2024