ZTE MF30 Bedienungsanleitung

ZTE Mobiltelefon MF30

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZTE MF30 (2 Seiten) in der Kategorie Mobiltelefon. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Introduction

ZTE MF30 is a 3G/2G mobile hotspot device, working in GSM/GPRS/EDGE/

WCDMA/HSPA network. The client devices could connect to it via USB or

Wi-Fi interface. The device supports data and SMS services, enabling you to

communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started with

the product. For information about connection of services, please consult

your service provider.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057

Tel: +86-755-26779999 URL: http://www.zte.com.cn

E-mail: mobile@zte.com.cn

ZTE MF30

Quick Guide

2 4 5 6 73 8

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including

photocopying and microfilm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.0

Specication

Hardware Installation

Working Mode

Notes:

microSD is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for your

reference. The actual device may be different.

Interface and Buttons

1.Power Hold the button to switch on/off the device.Power

2.Memory card slot

(microSD card)

It is where you insert the memory card (microSD

card).

3.WPS

This button is used to start Wi-Fi Protected Setup

authentication process and enable/disable the Wi-Fi

function.

• Hold it for three seconds to activate th e WPS

process.

• Press it to enable/disable Wi-Fi function.

4.Charger/USB port • Charge your device.

• Connect the client to your device via USB cable.

Notes:

Hold the and buttons simultaneously until all LEDs are off, and WPS Power

then release the buttons. The device will restart automatically and restore to

the factory default settings.

LED Indicator

It indicates the status of your device.

When the device is powered on:

Indicator Status Description

Battery

indication

Red blinking Please charge the battery

Red solid Voltage of battery is low

Green blinking Charging

Green solid Voltage of battery is full(Charging

completed)

Signal strength

indication

Red solid ERROR or NO signal or NO

network service

Green blinking Signal is ok

Green solid Signal is good

Your device supports three working modes. For the client, we only use PC or

laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Establish a connection between your device and the client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation.

Notes:

• If the system does not launch installation automatically, you can run the

installation program in path of .My Computer > Mobile Hotspot

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on your

desktop and a program group in the Mobile Hotspot Start→Programs

menu. The connection between your device and the client will be

established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize, and

then Wi-Fi LED is blinking.

2. Use your normal Wi-Fi application on the client to search the available

wireless network.

Mixed Mode: Connect to the device with the above two connection methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure that

the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices can

surf on the Internet at the same time.

Data Service

HSPA: DL 7.2Mbps

UL 5.76Mbps

WCDMA CS: 64kbps UL/DL

WCDMA PS: 384kbps UL/DL

Interface USB and Wi-Fi

Wi-Fi Standard 802.11b/g

Wi-Fi Security WEP/WPA/WPA2

USB Version USB 2.0 HIGH SPEED

USB Interface Type Mini USB-B

Weight 65g

Dimensions (W×H×D): 99.7mm*53.7mm*13.9mm

microSD card Support up to 32GB microSD card

Power Adapter 5V/700mA

Battery 1500mAh

*Standby time 100hours

*Working time 4hours

Operate system Windows 7, Windows Vista, Windows XP (SP2 or

later), MAC 10.4 or later

Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0

or later), Safari (4.0 or later), Chrome (5.0 or later)

Operating temperature 0°C ~ +35°C

Storage temperature -20°C ~ +50°C

Charging temperature 0°C ~ +45°C

Humidity 5%~ 95%

Wi-Fi indication

Blue blinking Wi-Fi is active

Blue solid WPS is active

LED off Wi-Fi is inactive

Network

indication

Red blinking 2G data transferring

Red solid Register on 2G network

Green blinking 3G data transferring

Green solid Register on 3G network

When the device is powered off and charging:

Indicator Status Description

Battery indication

Green blinking Charging

LED off Voltage of battery is full(Charging

complete)

Inserting SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert the SIM card into the SIM card holder.

3. Insert the battery as shown with the contacts located against the metal

springs, and press the battery down into the case.

4. Line the battery cover up correctly and press gently to close the case.

Inserting microSD Card

1. Pull the microSD cover out of the card slot.

Notes:

Do not pull the cover rudely, as it is connected with the device.

2. Insert the microSD card into the microSD slot. The following picture

shows the correct inserting direction. You will hear a click when the

microSD card locks in place.

3. Close the microSD cover.

Switching On/Off Your Device

Hold the button to switch on/off the device.Power

Notes:

The device is powered on when the signal strength indication lights up.

Charging Your Device

You can charge your device by using USB cable or adapter.

1. Insert the charger lead carefully with the plug arrow facing the bottom of

the device.

2. The plug only fits one way. Do not use

excessive force to insert the plug.

3. Make sure the plug is the right way round

and lined up correctly and insert it gently.

10 11 12 13 14 15 16 17 18

Notes:

You need to check your Wireless Network Connection. Set the client

to obtain an IP address automatically in the Internet protocol (TCP/IP)

properties, and the client will get an IP address like “192.168.0.100”.

3. Select the SSID of your device, and then click .Connect

Notes:

There will be a pop-up window to require the password. Check the label on

your device to gain the SSID and preset password information. Make sure

that you can remember the new password if you have changed the password

by selecting . Please restore the Settings > Wi-Fi Settings > Security

device to the factory default settings in case you forget the new password.

4. Wait a moment, the connection between your device and the client will

be established successfully.

Access the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet in the

Always On Manual On Demand Always , or mode. The default mode is

On.

Access the WebGUI Conguration Page

1. Make sure the connection between your device and the client is correct.

2. Launch the internet browser and enter http://192.168.0.1 or http://ufi.

home in the address bar.

Notes:

It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera

(10.0 or later), Safari (4.0 or later) or Chrome (5.0 or later).

3. The login page appears as follows.

View the information of WAN, WLAN and Device. Input the case-sensitive

default password “ ”, and then click to access the WebGUI admin Login

Conguration page.

Notes:

• Do not put anything on the top of your device. Do not lay devices to

overlap each other when using.

• The device takes 1~2 minutes to initialize, and attach to the network.

PIN Code Verication

If the PIN code of your SIM card is enabled, you will need to input the PIN

code when you login at the rst time.

Notes:

The SIM card will be locked if you enter wrong PIN code consecutively for

three times.

If you want to modify the PIN Status, please select Settings > Advanced >

PIN Manage to do the actions.

Quick Setup

After logging in, select , and then the Quick Setup wizard Quick Setup

appears.

The Quick Setup wizard guides you how to set the basic parameters for your

device in the safest way. After this procedure, you can use your Internet service.

Notes:

The parameter settings may have been preset by your service provider,

and you will enjoy your Internet service directly. Please contact your service

provider for details if you want to do some modication.

WAN Connection

After logging in, select , and you can choose the WAN WAN Connection

Connection Mode according to your requirement.

Settings

After logging in, select , and you can do the following operations.Settings

Select Settings >

Wi-Fi Settings

View the current station list, change the basic wireless

network settings, choose security mode and WPA type,

and perform the WPS conguration.

Select Settings >

3G Settings

View the 3G Wireless Information, select Band

Selection Mode or change APN Setting.

Select Settings >

Firewall

Set the Mac/IP/Port Filtering, Port Forwarding or the

System Security conguration.

Select Settings >

Advanced

View the current status of your device, change the

Administrator Settings, restore factory defaults,

manage PIN or set the LAN interface conguration.

Notes:

Make sure that you can remember the new password if you change the login

password by selecting Settings > Advanced > Management. Please restore

the device to the factory default settings in case you forget the new password.

To the Owner

• Some electronic devices are susceptible to electromagnetic interference

sent by your device if inadequately shielded, such as the electronic

system of vehicles. Please consult the manufacturer of your device

before using if necessary.

• Operating of laptop and desktop PCs and your device may interfere with

medical devices like hearing aids and pacemakers. Please always keep

them more than 20 centimeters away from such medical devices when

they are turned on. Turn your device off if necessary. Consult a physician

or the manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places such

as oil warehouses or chemical factories, where there are explosive gases

or explosive products being processed. Turn off your device if required.

• The use of electronic transmitting devices is forbidden in aircrafts, at

petrol stations and in hospitals. Please observe and obey all warning

signs and switch off your device in these conditions.

• Do not touch the inner antenna area if not necessary. Otherwise it will

affect your device’s performance.

• Store your device out of the reach of little children. Your device may

cause injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn,

when your device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using

any unauthorized accessories may affect your device’s performance, and

violate related national regulations about telecom terminals.

• Avoid usin g y our device n ear or inside metal lic struct ures or

establishments that can emit electromagnetic waves. Otherwise it may

inuence signal reception.

• Your device is not waterproof. Please keep it dry and store in a shady

and cool place.

• Do not use your device immediately after a sudden temperature change.

In such case, it will produce dew inside and outside your device, so don’t

use it until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it. Otherwise

your device will be damaged.

• No dismantling by non-professionals and only qualied technicians can

undertake repair work.

• Operating temperature range of 0°C ~ +35°C and humidity range of 5%

~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat and

re.

• Do not store battery in hot areas or dispose of it in a fire to avoid

explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from the phone

and store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed

recycle place. Do not put it in familial rubbish.

Warning:

If the battery is broken, keep away from it. If it taints your skin, wash your

skin with abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product caused

by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or

maintenance instructions or procedures.

Disconnect from the Internet

SMS

1. Log in the WebGUI Conguration page, and select WAN Connection.

2. Select .Manual > Disconnect Internet

3. Click .Apply

This function allows you to view, send and receive short messages.

After logging in, select , and you can do the following operations.SMS

Select Operate the SMS in your device.SMS > Local

Select Operate the SMS in your SIM card.SMS > SIM Card

Select Send or save SMS.SMS > New Message

Select SMS > SMS Settings Set the SMS conguration.

PhoneBook

Usage of WPS

This function allows you to store contacts to your device or SIM card.

After logging in, select , and you can add a new contact by PhoneBook

clicking the tab, and perform operations to the contacts in the Add New

Local SIM Card or tab.

If your client device supports WPS, you need not to input the password

manually after WPS has been available. Please do the following:

1. Start up your device.

2. Launch the client device connected to your device.

3. Enable the WPS function of your device.

4. Enable the WPS function of the client.

Notes:

For the detailed operations about the client, please refer to the client’s

instruction.

Sleep Mode

When you enable the Wi-Fi function and use the battery to supply power to

the device, once no user connects to the device within 10 minutes or you

press the WPS button, the device will enter the sleep mode, and all LEDs will

be turned off. In the sleep mode, the Wi-Fi function will be disabled. Press

Power or button to wake up the device, and all LEDs will be turned on. WPS

Warning and Notice

You can get Help by:

• Sending E-mail to mobile@zte.com.cn

• Visiting http://www.zte.com.cn

• Calling Service Hotline: +86–755–26779999

How to Get Help

Notes:

You can browse the WebGUI Conguration page and click WAN Connection

to set the WAN connection mode.

iii. End User’s mishandling, misuse, negligence, or improper installation,

disassembly, storage, servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified

individual.

v. Power failures, surges, re, ood, accidents, actions of third parties

or other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party

products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the

Product.

End User shall have no right to reject or return the Product, or receive a

refund for the Product from ZTE under the above-mentioned situations.

• This warranty is End User’s sole remedy and ZTE’s sole liability for

defective or nonconforming items, and is in lieu of all other warranties,

expressed, implied or statutory, including but not limited to the implied

warranties of merchantability and tness for a particular purpose, unless

otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of prots or indirect, special, incidental or

consequential damages resulting from or arising out of or in connection with

using of this product, whether or not ZTE had been advised, knew or should

have known of the possibility of such damages, including, but not limited to

lost prots, interruption of business, cost of capital, cost of substitute facilities

or product, or any downtime cost.

microSD Card

This function allows you to share SD card with others.

After logging in, select , and then select the microSD Card microSD Card

Share Mode Apply which you want to use. Click to conrm.

Notes:

Please insert your microSD card before selecting this menu.

Notes:

Turning off the device can also terminate the internet connection.

Notes:

With USB connection if no Wi-Fi user connects to the device within 10

minutes, only the Wi-Fi function will be disabled. Press WPS button to enable

this function.

Produktspezifikationen

Marke:	ZTE
Kategorie:	Mobiltelefon
Modell:	MF30

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZTE MF30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mobiltelefon ZTE

ZTE MF61 Bedienungsanleitung

1 September 2024

ZTE Solar Bedienungsanleitung

22 August 2024

ZTE N-860 Bedienungsanleitung

14 August 2024

ZTE T-165 plus Bedienungsanleitung

10 August 2024

ZTE Grand X Max Bedienungsanleitung

10 August 2024

ZTE Altair 2 Bedienungsanleitung

5 August 2024

ZTE Telstra T95 Bedienungsanleitung

5 August 2024

ZTE Skate Kis Bedienungsanleitung

5 August 2024

ZTE S510 Bedienungsanleitung

4 August 2024

ZTE San Francisco II Bedienungsanleitung

3 August 2024

Bedienungsanleitung Mobiltelefon

Neueste Bedienungsanleitung für -Kategorien-

Lava Iris 550Q Bedienungsanleitung

6 Oktober 2024

NEC N412I Bedienungsanleitung

5 Oktober 2024

Alcatel One Touch 305 Bedienungsanleitung

24 September 2024

Lenovo A390 Bedienungsanleitung

18 September 2024

Alcatel One Touch C630 Bedienungsanleitung

17 September 2024

Alcatel One Touch 799 Bedienungsanleitung

16 September 2024

Lava Iris 354e Bedienungsanleitung

16 September 2024

Lava Iris fuel 50 Bedienungsanleitung

15 September 2024

Logicom L-195 Bedienungsanleitung

14 September 2024

Bixolon SPP-L410 Bedienungsanleitung

9 September 2024