Zoom AC-2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zoom AC-2 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Thank you very much for purchasing a (hereafter, " ").ZOOM
Please read this manual carefully to fully understand the functions of the so that
you can make the most of it for many years.
Keep this manual in a convenient location and refer to it as necessary.
Operation Manual
Contents
© 2017 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Manufacturer names and product names are trademarks or registered trademarks of their respective owners.
The names are used only to illustrate sonic characteristics and do not indicate any affiliation with the Zoom Corporation.
Usage and Safety Precautions ………… 2
Introduction ………………………………… 3
Names of parts …………………………… 4
Connecting a guitar ……………………… 6
Connecting output devices ……………… 6
Turning the power on …………………… 7
Setting the pickup type …………………… 8
Setting the volume………………………… 8
Setting the source guitar type…………… 9
Adjusting the equalization ……………… 10
Adjusting the reverb ……………………… 10
Using the boost function ………………… 11
Using the anti-feedback function ……… 11
Using the tuner …………………………… 12
Setting the type of batteries used ……… 12
Connecting audio equipment …………… 13
Updating the rmware …………………… 14
Troubleshooting …………………………… 15
Speci cations ……………………………… 15
2
Usage and Safety Precautions
Usage and Safety Precautions
In this operation manual, symbols are used to highlight
warnings and cautions that you must read to prevent
accidents. The meanings of these symbols are as follows.
Warning
Something that could cause serious injury
or death.
Caution
Something that could cause injury or
damage to the equipment.
Other symbols used
An action that is mandatory.
An action that is prohibited.
Warnings
Operation using an AC adapter
Always use an AC adapter that is 9V DC 500mA center negative
(ZOOM AD-16).
Do not do anything that could exceed the ratings of outlets and
other electrical wiring equipment.
Before using the equipment in a foreign country or other region
where the electrical voltage differs, always consult with a shop
that carries ZOOM products and use the appropriate AC adapter.
Operation with batteries
Use 2 commercially-available 1.5V AA batteries (alkaline or nick-
el metal hydride).
Carefully study the warning indications of the batteries before
use.
Always keep the battery cover closed during use.
Alterations
Do not open the case or modify the product.
Cautions
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter the
unit.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or where it could be splashed
by water.
Do not use in places with frequent vibrations.
Do not use in places with much dust or sand.
AC adapter handling
When disconnecting the power plug from an outlet, always pull
on the plug itself.
Disconnect the power plug from the outlet when the unit will
not be used for a long time and whenever there is lightning.
Battery handling
Install batteries with the correct +/ orientations.−
Use the speci ed batteries.
Do not use new and old batteries together. Do not use batteries
of different brands or types together.
Interference with other electrical equipment
In consideration of safety, the has been designed
to minimize its emission of electromagnetic waves and to
suppress interference from external electromagnetic waves.
However, equipment that is very susceptible to interference
or that emits powerful electromagnetic waves could result in
interference if placed nearby. If this occurs, place the
and the other device farther apart.
With any type of electronic device that uses digital control,
including the , electromagnetic interference could
cause malfunction, corrupt or destroy data and result in other
unexpected trouble. Always use caution.
Cleaning
Use a soft cloth to clean the exterior of the unit if it becomes
dirty. If necessary, use a damp cloth that has been wrung out
well to wipe it.
Never use abrasive cleansers, wax or solvents such as alcohol,
benzene or paint thinner.
Breakdown and malfunction
If the unit becomes broken or malfunctions, immediately turn
the power off, disconnect the AC adapter and disconnect other
cables. Contact the store where you bought the unit or ZOOM
service with the following information: product model, serial
number and specific symptoms of breakdown or malfunction,
along with your name, address and telephone number.
Safety Precautions
Usage Precautions
Remove the batteries when the unit will not be used for a long
time.
If a leak occurs, thoroughly wipe the battery case and battery
terminals to remove the leaked uid.
Connection cables and input/output jacks
Always turn the power OFF for all equipment before connecting
any cables.
Always disconnect all connection cables and the AC adapter
before moving the unit.
Volume
Do not use at a loud volume for a long time.
Declaration of Conformity
For EU Countries
FCC regulation warning (for U.S.A.)
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3
Introduction
Acoustic remodeling that restores body tone
The 16 source guitar type presets simulate the sonic characteristics of a variety of acous-
tic guitars with different body shapes and material properties. By choosing a source
guitar according to the guitar that you are using, you can share the original rich and
beautiful tone of your acoustic guitar with audiences during live performances.
High-quality preamp that can be used with many pickups
The preamp was designed especially for acoustic guitars and can be used with input
from piezoelectric, magnetic and passive pickups. This acoustic guitar preamp provides a
range of key features, including a 3-band EQ that can be used to adjust the tone accord-
ing to the environment and a super-low-noise design with a 120 dB S/N ratio and a –100
dBu noise oor.
Anti-feedback function with minimal effect on tone quality
The anti-feedback function can quickly and effectively eliminate feedback during a per-
formance.
Clean boost of up to 9 dB
The boost function can reduce the volume differences of fingerpicking, strumming
chords and other guitar playing techniques, as well as increase ampli cation during so-
los.
Introduction


Produktspezifikationen

Marke: Zoom
Kategorie: Nicht kategorisiert
Modell: AC-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zoom AC-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Zoom

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-