ZKTeco ZKP8008 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZKTeco ZKP8008 (40 Seiten) in der Kategorie printer. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
POS rinter-80- PSeries
Programmer Manual
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09
Decimal 9
[Description] Moves the print position to the next horizontal tab position.
[Details] • This command is ignored unless the next horizontal tab position has been set.
• If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
• Horizontal tab positions are set with ESC D.
• If this command is received when the printing position is at [printing area
width+ 1], the printer executes print buffer-full printing of the current line and
horizontal tab processing from the beginning of the next line.
• The default setting of the horizontal tab position for the paper roll is font A(12
×24) every 8th character (9th, 17th, 25th, ... column).
[Reference] ESC D
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line based on the current line
spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference] ESC 2, ESC 3
CR
[Name] Print and carriage return
2
processed as the code for ESC 3 <10>H.
ï€ Even though the printer is not selected using ESC = (select peripheral
device), this command is effective.
ï‚· ï€ The printer transmits the current status. Each status is represented by
onebyte data.
The printer transmits the status without confirming whether the host
computer can receive data.
The printer executes this command upon receiving it.
This command is executed even when the printer is off line, the receive -
buffer is full, or there is an error status with a serial interface model.
With a parallel interface model, this command can not be executed when
the printer is busy. This command is executed even when the printer is off-line
or there is an error status when DIP switch 2 1 is on with a parallel interface-
model.
When Auto Status Back (ASB) is enabled using the GS a command, the
status transmitted by the DLE EOT command and the ASB status must be
differentiated.
n = 1: Printer status
Bit / OFF ON HEX Decimal
Function
0 OFF 00 0
Not used.Fixed to Off.
1 ON 02 2 Not used.Fixed to On.
2 OFF 00 0 Drawer open/close signal is LOW(connector pin3).
ON 04 4 Drawer open/close signal is LOW(connector pin3).
3 -- -- -- Undefined.
4 ON 10 16 Not used.Fixed to On.
5.6 -- -- -- Undefined.
7 OFF 00 0 Not used.Fixed to Off.
n = 2: Off line status-
Bit Off/On Hex Decimal Function
0 0 0 00 Not used Fixed to Off.
4
Produktspezifikationen
| Marke: | ZKTeco |
| Kategorie: | printer |
| Modell: | ZKP8008 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ZKTeco ZKP8008 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung printer ZKTeco
7 August 2024
Bedienungsanleitung printer
- printer Samsung
- printer HP
- printer Sony
- printer Panasonic
- printer LG
- printer Roland
- printer Canon
- printer Velleman
- printer CSL
- printer Sharp
- printer Mitsubishi
- printer Polaroid
- printer Seiko
- printer Toshiba
- printer Olympus
- printer Citizen
- printer Olivetti
- printer Epson
- printer Dell
- printer OKI
- printer Brother
- printer Sagem
- printer Fujifilm
- printer Ricoh
- printer Datamax-O'neil
- printer Intermec
- printer Primera
- printer TSC
- printer Zebra
- printer Triumph-Adler
- printer Kodak
- printer Konica-Minolta
- printer Frama
- printer Ultimaker
- printer Fujitsu
- printer Kogan
- printer Royal Sovereign
- printer Kyocera
- printer Lexmark
- printer Xerox
- printer Digitus
- printer Bixolon
- printer Ibm
- printer Oce
- printer Paxar
- printer Toshiba TEC
- printer StarTech.com
- printer Pantum
- printer HiTi
- printer Panduit
- printer Posiflex
- printer Brady
- printer Star Micronics
- printer Metapace
- printer Godex
- printer Argox
- printer Dascom
- printer EC Line
- printer Evolis
- printer Fargo
- printer IDP
- printer Tally Dascom
- printer Custom
- printer Nisca
Neueste Bedienungsanleitung für -Kategorien-
17 September 2024
17 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
15 September 2024