Zagg IM2ZKF-WWB Bedienungsanleitung

Zagg Toetsenbord IM2ZKF-WWB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zagg IM2ZKF-WWB (4 Seiten) in der Kategorie Toetsenbord. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www. c /faqZAGG. om
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq
To reach a trained customer service representative, please use one of the following:
ZAGG.com/support/contact.php | questions@zagg.com
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your iPad, we recommend ZAGG’s invisibleSHIELD®.
©2005 - 2013 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
iPad®, Apple®, and iTunes® are registered trademarks of Apple Inc.
ZAGG®, invisibleSHIELD®, and ZAGGkeys™ Folio are trademarks or registered trademarks of ZAGG Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1: This device may not cause harmful interference, and 2: This device must accept any interference
received, including interference that may cause undesired operation
FOLIO
*WARRANTY REGISTRATION
Your ZAGGkeys™ Folio comes with a one-year manufacturers warranty. In order to activate the warranty,
you must register your Folio as well as keep your purchase receipt. If you purchased your ZAGGkeys
Folio from ZAGG.com, ZAGG® has already registered it and has a copy of your proof of purchase.
INSERTING/REMOVING YOUR iPAD® TROUBLESHOOTING
If your iPad® does not respond to your Folio there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use
the following to help troubleshoot your situation. If none of the following
solve your issue, then please contact ZAGG customer service and one of
our trained professionals will be happy to assist you.
1. Restart your iPad by holding down the home and power button
simultaneously until it restarts. Let go of the buttons when you see the
Apple logo.
2. Turn your Folio o and back on. You should see the LED status light
illuminate briefly, if not, charge your Folio.
3. After charging, turn your Folio on. If the LED status light does not
illuminate, and your keyboard doesnt operate correctly, please contact
ZAGGs customer support.
4. Forget and re-pair your Folio. On your iPad, select: Settings > General >
Bluetooth > On. If you see ZAGGkeys Folio listed as an available
device, touch the arrow to the right of it and choose to have your iPad
forget the device.
5. Push the PAIR button on your Folio and watch for the LED status light
to ash blue.
6. Your iPad should display ZAGGkeys Folio as an available device.
Select it.
7. If your iPad gives you an error message, repeat the pairing process.
8. If you still cant get your Folio to pair, it is possible your iPad needs to
have its software updated.
To update your iPad’s software, follow these steps:
1. Plug your iPad into your computer, and open iTunes®.
2. In iTunes, select your iPad.
3. Choose to check for software updates.
4. If an update is available, please install it. This will take a few minutes to
download from Apple®.
5. After your update is complete, repeat the troubleshooting process*.
* If you continually receive the same error message during pairing, or the above steps dont work, please
contact ZAGG’s customer support for assistance.
To insert your iPad mini into the Folio, start
with the Folios keyboard facing you. Then,
with your iPad in landscape mode and the
volume control buttons facing out (the
Home button is on your right) set the
bottom half of your iPad in the Folio,
making sure it is settled (you may need to
apply light pressure to your iPad to ensure
it is settled at the bottom of the cover).
Next, snap the top half into the Folio. Check
all corners to make sure they have seated
properly as well.
To easily remove your iPad, simply grasp
the top of the Folios cover in the middle
and apply a light pressure to the back of
your iPad. Grasp your iPads exposed side
and lift/pull away from the Folio.
When your iPad is secure in the Folio, you
can close it, and cleverly placed magnets will
activate your iPads sleep/wake feature to
help preserve battery life. Simply open your
Folio to wake your iPad.
POWERING ON AND OFF
PAIRING YOUR ZAGG FOLIOkeys
THE FUNCTION ( ) KEYfn
To turn your Folio on, switch the POWER button to the ON position. A red
LED light will illuminate briefly while the keyboard powers up. To turn your
Folio o, simply switch the POWER button to the OFF position.
The fn key operates all key functions listed below. To activate these
functions, hold the key down and press the desired key. For keys with fn
two function symbols, the key operates the bottom symbol. Holding fn
SHIFT and the key simultaneously operates the upper symbol. fn
FN + CAPS Activates the CAPS Lock feature. When CAPS Lock is
on a blue indicator light will remain lit until it is turned o. To turn
CAPS Lock o, simply hold the key and press CAPS again. fn
FN + World Symbol Toggles between international keyboards
(when activated in your iPad®’s settings)
FN + Battery Symbol Indicates remaining battery life
FN + Backlight On Activates your Folios backlight feature. Pressing
this key once will turn on the backlights at their dimmest setting,
pressing it twice will brighten the lights, and pressing it three times
will brighten them to their brightest setting.
NOTE: The backlights will automatically turn o after a couple seconds if not being used. Simply
begin typing again to activate them.
FN + Backlight O Dims the backlights according to their selected
brightness until they turn o. For example, if your lights are at their
brightest setting, you would press this button once to dim the lights,
twice to set them at their dimmest setting, and three times to turn
the backlights o.
FN + Backlight Color Palette Press to select your preferred
backlight color. Press repeatedly to cycle through available colors.
NOTE: The backlight feature must be turned on in order for the palette to work.
Pairing your Folio with your iPad® is easy. It should only need to be paired
once, using the following directions. If the connection between your iPad
and Folio is ever lost, simply repeat these steps.
1. On your iPad select: SETTINGS > GENERAL > BLUETOOTH > ON.
2. Press the PAIR button on your Folio keyboard. A blue LED light will
ash until your Folio and iPad are paired.
3. Your iPad will display ZAGGkeys Folio as an available device.
Select this option to complete pairing.
LED LIGHT PAIR BUTTON
LED LIGHT
ON POSITION
OFF POSITION
POWER BUTTON
SHIFT
DEFAULT
FN + SHIFT
FN
SHIFT
DEFAULT
DEFAULT
FN + SHIFT
FN
FN + SHIFT
FN

Produktspezifikationen

Marke: Zagg
Kategorie: Toetsenbord
Modell: IM2ZKF-WWB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zagg IM2ZKF-WWB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Toetsenbord Zagg

Bedienungsanleitung Toetsenbord

Neueste Bedienungsanleitung für -Kategorien-