Yealink WF50 Bedienungsanleitung

Yealink Dongle WF50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yealink WF50 (8 Seiten) in der Kategorie Dongle. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Wi-Fi USB Dongle

WF50

www.yealink.com

User Guide(V1.1)

Wi-Fi USB Dongle is used in following scenarios:

• For IP phones: connect to the wireless network.

• For video conferencing systems: connect to the wireless

network or provide wireless AP (Access Point) for other

devices.

To assemble the Wi-Fi USB Dongle:

1. Insert the Wi-Fi USB Dongle to the USB port on the IP

phone or video conferencing system.

Introduction

Connecting to the Wireless Network

Package Contents

Wi-Fi USB Dongle WF50 User Guide

Assembling the Wi-Fi USB Dongle

Note: Not all IP phones and video conferencing systems support

Wi-Fi USB Dongle. For more information, contact your

system administrator.

To connect to an available wireless network via the IP

phone (take the SIP-T46S phone for an example):

1. Assemble the Wi-Fi USB Dongle.

The LCD screen prompts “Wi-Fi adapter has been added,

scanning the available wireless network right now?”

2. soft key. Press the OK

3. . Select X available network(s)

4. Select the desired wireless network and then press the

Connect soft key.

5. (Optional.) Enter its password in the field.Password

6. soft key. Press the OK

Once the connection completes successfully, the icon

appears after the SSID.

To connect to an available wireless network via the video

conferencing system:

1. Assemble the Wi-Fi USB Dongle.

The monitor prompts "Wi-Fi adapter is connected".

2. On your remote control, navigate to -> -> More Setting

Advanded Wi-Fi-> .

3. Check the checkbox. Wi-Fi

4. If you already enabled wireless AP, press OK to disable it.

5. Select the desired wireless network and then press OK.

6. (Optional.) Enter its password in the field.Password

7. . Select Join to Network

Once the connection completes successfully, the icon

appears on your monitor.

To provide wireless AP via the video conferencing system:

1. Assemble the Wi-Fi USB Dongle.

The monitor prompts "Wi-Fi adapter is connected".

2. On your remote control, navigate to -> -> More Setting

Advanced Wireless AP-> .

3. Check the checkbox. Wireless AP

4. If you already enabled Wi-Fi, press OK to disable it.

Other devices can connect to this wireless AP. Once the

connection is successful, the number of connections

appears beside the icon.

Providing Wireless AP for Other Devices

Produktspezifikationen

Marke:	Yealink
Kategorie:	Dongle
Modell:	WF50
WLAN:	Ja
Breite:	27 mm
Tiefe:	52 mm
Gewicht:	28 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabellos
Höhe:	8 mm
Betriebstemperatur:	-10 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Unterstützte Sicherheitsalgorithmen:	WEP, WPA, WPA-PSK, WPA2, WPA2-Enterprise, WPA2-PSK
Warentarifnummer (HS):	85176990
Maximale Datenübertragungsrate:	433 Mbit/s
Eingebaut:	Nein
Temperaturbereich bei Lagerung:	-30 - 70 °C
Frequenzbereich:	2.4 - 5 GHz
USB-Version:	2.0
Schnittstelle:	WLAN
Top WLAN-Standard:	Wi-Fi 5 (802.11ac)
WLAN-Band:	Dual-Band (2,4 GHz/5 GHz)
Hostschnittstelle:	USB
Firewall Durchsatz:	- Mbit/s